Wise Pilot Chair With Adjustable Pedestal and Slider
Item No. 322735
Images
Details
https://www.overtons.com/wise-pilot-chair-with-adjustable-pedestal-and-slider-322735.html
Wise Pilot Chair With Adjustable Pedestal and Slider
Wise Pilot Chair With Adjustable Pedestal and Slider is rated
out of
5 by
20.
Item No. 322735
$265.99
$299.99
Save $34.00
(
11% Off
)
Additional Information
Features
Comfortable and stylish, this chair is constructed with a rotomolded plastic shell and heavy-duty OEM grade vinyl. Pillow back and seat cushions snap on and off for storage. Grooved thick-wall 2-7/8" dia. polished aluminum pedestal with 9" base, 360° swivel, and positive locking fore and aft slide. Pedestal adjusts from 12"-18". Mounting plate included. 18.25"H x 20.5"W x 22.5"D; 17.75"W (inside). Six-year warranty on frame. Three-year warranty on upholstery.
Show moreShow less
- Rotomolded plastic shell
- Heavy-duty OEM grade vinyl
- 2-7/8" dia. polished alum. pedestal with 9" base
- Positive locking fore and aft slide
Specs
| Base Dimensions | 9" |
|---|---|
| Boat Seat Style | Helm Seat |
| Overall Seat Dimensions | 18.25" H x 20.5 W x 22.5' D |
| Pedestal Included | Yes |
| Seat Depth | 17.75 in |
| Upholstery Material | Heavy-duty OEM grade vinyl |
| Unit Weight | 56.00 lb |
| Brand | Wise |
WARNING: This product can expose you to chemicals including Acetaldehyde / 2-Acetylaminofluorene, Bracken fern, which is [are] known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Rated 5 out of
5
by
DOVE VAI? from
BETTER THAN EXPECTED
WE REPLACED THE TYPICAL FRONT/BACK STORAGE SEATS WITH THESE. NOW WE CAN ACTUALLY SIT AND DRIVE THE BOAT. COMFORTABLE, WELL MADE CLEAN LINES LOOK GREAT IN OUR OLDER BOAT. ENOUGH ADJUSTMENT MAKES IT EASY TO GET A GOOD 'FIT' VERY EASY TO INSTALL AND I WOULD RECOMMEND THIS SEAT TO ANYONE LOOKING TO REPLACE THEIR SEATS.
Date published: 2014-10-08
Rated 4 out of
5
by
Capt Jorge from
Good chair!
Delivery was right on.....
Date published: 2014-08-07
Rated 5 out of
5
by
Munjy from
Quality chair at a good price
Chair looks good and is very comfortable. Easy to install. 2 chairs took 15 minutes to complete.
Date published: 2013-08-21
Rated 4 out of
5
by
paul from
easy to install and comfy
installed in a 21 foot bayliner cutty.the orig seat broke. Just 6 screws and installed. Very comfy cruising
Date published: 2012-09-05
Rated 4 out of
5
by
paul from
MUCH BETTER THAN THE SEAT REPLACED
I do A lot of trolling and cruising and the chair is comfy. Only six screws to install, did it under 5 minutes.
Date published: 2012-09-05
Rated 5 out of
5
by
Dan from
Nice replacement seat made in the USA
Purchased this seat to do a modification to my Bayliner,it performs just as i expected and the cusions are very confortable.
Date published: 2012-07-05
Rated 5 out of
5
by
mudduck from
good looking and comfortable
i used this product on a pontoon boat as a capyains chair
Date published: 2012-05-15
Rated 5 out of
5
by
Captain Mitch from
Pilot chair
We bought this for our houseboat. It is very comfortable and very easy to install
Date published: 2012-01-11
Q & A
Can the pedestal be cut down. I only need about 8 inches. To be mounted to a livewell on a 2007 triumph 215cc
Thank you for your question. Yes you could cut the pedestal but this will void the warranty.
Date published: 2019-07-17
How much does the chair and pedestal weigh ?
They weight approximately 50lbs.
Date published: 2017-08-25
can I buy replacement upholstery
Yes. Item 98080 is the replacement cushion set for this seat. Here is a link to the product. http://www.overtons.com/modperl/product/details.cgi?pdesc=Wise-Standard-Pilot-Chair-Seat-Cushions-Only&i=98080
Date published: 2015-09-23
does this only come in white or can I get it in grey
White Only.
Date published: 2015-09-23
Why weren't screws for the base , etc. shipped with the chair? What size screws chould be used for the base? Any bolts, nuts, needed? What size screws for the base? Assume need to be galvanized!
Please contact our technical department at 1.800.334.6541 for further information.
Date published: 2015-09-23
Why weren't galvanized screws for the base included? What size screws should be used? Is any other hardware(bolts, washers, nuts, etc.) required for installation?
The Wise Company, due to past experiences and legalities, does not include any hardware to mount any seat or pedestal to the floor of a boat. You should have everything that you need to put the seat together, but there will never be hardware to mount to the floor of the boat. You will need to go to the hardware store and get the proper hardware for your particular boat. We can not say that there is one size bolt or screw needed to mount these to the floor because every boat is different. You will need to make sure that whatever you get for mounting to the deck of the boat is stainless steel so that it will not rust or break.
Date published: 2015-09-23
I know that the cusheons can be removed, but Can the seat be removed from the pedestal or from the base?
No it is not supposed to be removed, but you can be unbracketed it if you needed too.
Date published: 2015-09-23