Trailer Bunk Swivel Bracket, each
Item No. 314415
Trailer Bunk Swivel Bracket, each is rated
out of
5 by
10.
Images
Details
https://www.overtons.com/trailer-bunk-swivel-bracket-each-314415.html
Trailer Bunk Swivel Bracket, each
$4.74
$4.99
Save $0.25
(
5% Off
)
Additional Information
Features
Designed to support horizontal 2" x 6" and 2" x 4" bunks or bolster boards, this galvanized swivel bracket pivots to allow mounting at the proper angle. Sold individually.
• Bunk flange: 1-3/8" x 3-1/2"
• Bunk flange holes: 3/8" dia.
• 2-1/2" bunk flange holes on center
• Swivel flange: 2"H x 3-1/2"W
• Swivel flange hole: 1/2" dia.
• 11-gauge galvanized steel
• Made in the USA
Show moreShow less
• Bunk flange: 1-3/8" x 3-1/2"
• Bunk flange holes: 3/8" dia.
• 2-1/2" bunk flange holes on center
• Swivel flange: 2"H x 3-1/2"W
• Swivel flange hole: 1/2" dia.
• 11-gauge galvanized steel
• Made in the USA
- Supports 2x4 and 2x6 bunks or bolster boards
- Pivots to allow mounting at the proper angle
- 3-1/2" wide
- Holes: 3/8", 2-1/2" on center
- Sold individually
Specs
| Unit Weight | 0.32 lb |
|---|---|
| Brand | Smith |
Reviews
Q & A
Designed to support horizontal 2" x 6" and 2" x 4" bunks or bolster boards, this galvanized swivel bracket pivots to allow mounting at the proper angle. Sold individually.
• Bunk flange: 1-3/8" x 3-1/2"
• Bunk flange holes: 3/8" dia.
• 2-1/2" bunk flange holes on center
• Swivel flange: 2"H x 3-1/2"W
• Swivel flange hole: 1/2" dia.
• 11-gauge galvanized steel
• Made in the USA
Show moreShow less
• Bunk flange: 1-3/8" x 3-1/2"
• Bunk flange holes: 3/8" dia.
• 2-1/2" bunk flange holes on center
• Swivel flange: 2"H x 3-1/2"W
• Swivel flange hole: 1/2" dia.
• 11-gauge galvanized steel
• Made in the USA
- Supports 2x4 and 2x6 bunks or bolster boards
- Pivots to allow mounting at the proper angle
- 3-1/2" wide
- Holes: 3/8", 2-1/2" on center
- Sold individually
| Unit Weight | 0.32 lb |
|---|---|
| Brand | Smith |
Rated 5 out of
5
by
Rick from
Exactly as advertised
Fast shipping and I am very pleased. The options to different styles was nice
Date published: 2016-08-16
Rated 4 out of
5
by
Water Junky from
Need better discriptions
I guess it is my own fault should investigated more I ordered parts that were to small for my boat trailer. would like more easier help to order correct ones.
Date published: 2015-08-21
Rated 5 out of
5
by
MK from
It does the job it was designed for very well
The product was shipped for free arrived quickly allowed me to get the repairs done and get back on the water.
Date published: 2015-08-21
Rated 5 out of
5
by
Jpet from
Served its purpose
It's a bracket and it works well.
Date published: 2015-06-05
Rated 5 out of
5
by
none from
The products are all fine. Thanks.
The products that I purchased were basic and very appropiate for the intended uses. The personal service that I experienced in placing the order was exceptional. I don't need many products, but I will shop with you when I do need something.
Date published: 2012-06-13
Rated 5 out of
5
by
John from
heavy duty product, improvement over OEM
heavy duty product, looks heavier than OEM bunk swivels. Galvanized, shouldn't rust.
Date published: 2011-12-16
Rated 5 out of
5
by
Mcgoo from
perfect match
These brackets replaced my old ones perfectly and seem like they are heavy duty and made my trailer better. I feel confident putting my boat on the trailer now.I have not been disappointed with any products from this company yet!
Date published: 2011-08-30
Rated 5 out of
5
by
Jayhawk John from
Good product, well made.
A well made heavey duty product, with good galvanizing.
Date published: 2010-07-06
Are these the correct hardware to Overton's Tie Down Hull Sav'rs? I am buying three pairs of the Hull Sav'rs so I'm assuming I need 12 of these bolster brackets. Am I correct?
Item# 94391 comes with all of the mounting hardware, so these would not be needed for that.
Date published: 2017-08-14
Do you sell a U-bolt that will fit that 2-hole pattern? My issue is the new LED replacement lights cover the hole I use to put my tie down straps on. So, now I need something that will bolt to the trailer and leave one open hole to tie down strap.
No. The closest U-bolt that we offer is the Zinc-Plated U-Bolt, 2-1/8"W x 4"L (Item # 31968).
Date published: 2016-07-15
What is the largest size screw that will fit in the top 2 openings?
The Trailer Bunk Swivel Bracket will accommodate a 13/32" screw or bolt.
Date published: 2016-06-29
hi, is this a universal bracket for trailer bunks? i have a 1993 lil rider and the brackets to the wood bunks rusted off. do these brackets come with the screws/bolts? what is the lead time to 08260?
Designed to support horizontal 2" x 6" bunk or bolster boards. They are not so much trailer specific as to adhering to the bunk specifications above.
Date published: 2015-09-23