TRAC 600 GPH Bilge Pump Kit
Item No. 317600
TRAC 600 GPH Bilge Pump Kit is rated
out of
5 by
3.
Images
Details
https://www.overtons.com/trac-600-gph-bilge-pump-kit-317600.html
TRAC 600 GPH Bilge Pump Kit
$28.49
$29.99
Save $1.50
(
5% Off
)
Additional Information
Features
TRAC 600 gph Bilge Pump Kit
Ideal for all watercraft, the TRAC Bilge Pump is designed for easy installation and retrofitting. This self-priming, submersible, 12V centrifugal pump offers a 600 gph flow rate and has a 3/4" dia. outlet. Cartridge style pump head with a universal strainer base. Ignition protected. Low power draw. Runs dry without damage. Meets ABYC and ISO marine standards. The convenient kit comes complete with 600 gph pump, 5' of 3/4" bilge hose, 3/4" thru-hull fitting, and two stainless steel hose clamps.
Show moreShow less
Ideal for all watercraft, the TRAC Bilge Pump is designed for easy installation and retrofitting. This self-priming, submersible, 12V centrifugal pump offers a 600 gph flow rate and has a 3/4" dia. outlet. Cartridge style pump head with a universal strainer base. Ignition protected. Low power draw. Runs dry without damage. Meets ABYC and ISO marine standards. The convenient kit comes complete with 600 gph pump, 5' of 3/4" bilge hose, 3/4" thru-hull fitting, and two stainless steel hose clamps.
- 600 gph bilge pump
- Submersible
- 3/4" outlet
- Includes hose, clamps, and thru-hull fitting
Specs
| Unit Weight | 2.30 lb |
|---|---|
| Brand | TRAC |
Reviews
Rated 5 out of
5
by
Wave jumper from
Been great! 3 seasons
I have 2 of these. Both used exclusively in salt water jet skis. No problems and I recommend this. The basket is robust. I jump a lot of big waves and ride over 150hrs a season. Still works great. - I glued my strainer baskets to the hull. (4200 or such) You will need a waterproof fuse, some wire, waterproof connector and a waterproof switch. - Brown is power, black is ground (direct to battery) - The through hull fitting is usable. It's a bit long/big because of the extra long threaded area. Also, it tapers a bit too small so the hose isn't a tight fit. The clamp keeps it tight but smearing some silicone, etc around the barb makes it better. - It's a good pump and comes in a kit at a good price.
Date published: 2015-06-27
Rated 2 out of
5
by
Rich from
Lack of installation instructions.
lack of instuctions
Date published: 2014-01-28
Rated 3 out of
5
by
YamaFast from
good kit**
Comes a s kit. specs read nicely. hope it lasts. Upgrade the through hull fitting or use 5200 to seal the tubing better. you will still need wire, a switch(on/off or float), connectors etc. test +/- leads for polarity (not marked) for best(most efficient/proper) rotation of pump blades able to run wet/dry
Date published: 2013-11-18
Q & A
How long is the wire running from the pump to the connectors?
The TRAC 600 GPH Bilge Pump Kit has a lead wire that is 29" long.
Date published: 2017-05-16