Pro Deck Master Pylon
Item No. 322606
Images
Details
https://www.overtons.com/pro-deck-master-pylon-322606.html
Pro Deck Master Pylon
Pro Deck Master Pylon is rated
out of
5 by
10.
Item No. 322606
$349.99
Compare at $359.99
Additional Information
Features
The Pro Deck Master Pylon has a high-quality Delron swivel head that reduces rope wear. The main body is constructed of 1-1/2" stainless steel tubing, while arms are 1" stainless steel with quick connect hitch pins for easy assembly and removal. Pylon adjusts from 32" to 42". Telescoping brace arms adjust from 32" to 57" allowing for a custom fit on most boats. Mounting screws not included. Not recommended for pulling inflatables.
Show moreShow less
- 1-1/2" stainless steel tubing
- Pylon adjusts from 32" to 42"
- Delron swivel head reduces rope wear
- Telescoping brace arms adjust from 32" - 57"
- Not recommended for pulling inflatables
Specs
| Unit Weight | 13.70 lb |
|---|---|
| Brand | Barefoot International |
WARNING: This product can expose you to Diisononyl phthalate (DINP), a chemical known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Rated 3 out of
5
by
vlad from
Poor Description
I had to return the item. In fact, I supposed this would happen, because there was no way to tell from the description whether this was what I needed or not. Ended up being not. The description could have been a bit more detailed. At least to have more pictures of the details of the item.
Date published: 2017-06-26
Rated 5 out of
5
by
Jodom from
Very pleased
Very easy to install I like the adjustable height feature it said not recommended for tubing but performed fine u just have to becareful with sharp turns while tubing
Date published: 2015-07-15
Rated 4 out of
5
by
grayt64 from
works well.
I had difficult situation to prep for install but would be easier on most other boats. The fixed main shaft one would have been better. I installed mine with lowest points for stability and stainless bolt to eliminate flex/slack in post base removable pin. Good product though.
Date published: 2015-06-15
Rated 5 out of
5
by
D from
great universal fit unit
Easy To Install Measured And Adjusted Numerous Times Before Drilling Into Boat ..
Date published: 2014-08-12
Rated 4 out of
5
by
Sid the Engineer from
Great Product
This product is constructed very well. Much stronger than the one it replaced. Installation is not too bad just take your time. You will need a center punch and some good drill bits because you have to drill through stainless. Read the instructions and use soap on the threads of the bolts. I did not do this and now I had to replace one of the custom bolts. It is totally my fault. there is a red warning card and a phone number and even a cell number for after hours support. I would highly recommend this product. It is well made and should last a long time.
Date published: 2014-07-22
Rated 5 out of
5
by
shawn thomas from
Very solid, quality product!
Have not had the chance to use this yet, but it was exactly what I was looking for, and after al the great reviews I am sure it will not disappoint. Installation was a cinch. I will follow up after we get to use it!
Date published: 2014-06-13
Rated 5 out of
5
by
Lardbutt Brian from
the best accessory to my boat
I usually ski & kneeboard behind our pontoon boat, with this pylon it is easier to get out of the water, and on plane. it also keeps the rope out of the water when my kids kneeboard behind the boat.
Date published: 2012-06-26
Rated 4 out of
5
by
Boater from
Works well!
Works great keeping the front of the tube out of the water.
Date published: 2012-06-05
Q & A
Is this a permanent mounted pole, or can it be easily removed when not in use?
No, the Pro Deck Master Pylon has three quick connect hitch pins for easy assembly and removal.
Date published: 2017-06-22
Do you have pins for the ski pylon?
Please call 1-800-932-0685 and the manufacture will have the pins.
Date published: 2016-05-24
What is the diameter of the base mount plate?
3.5 inches
Date published: 2015-09-23
How far forward.. from the back of the boat does the pylon need to be mounted. I have a door hatch on the base of the boat that opens up to storage. I don't think I can mount the pylon on the hatch door.
Please call me on my cell phone at 561.523.1947 so I can go over this with you more clearly on the phone. Thanks, mike seipel
Date published: 2015-09-23
Why is this product not recommended for tubing?
Because the drag force will rip the pylon off the boat and could hit the tuber causing serious injury or death.
Date published: 2017-04-03
Why the not recommended for inflatables label if you recommend for wakeboards ?
Towables are bigger than wakeboards and it creates more drag on the pylon. Think about what is holding the pylon on the boat.....A few small screws, and if the screws give way the pylon is flying off the boat. Dont do it!
Date published: 2017-09-22
will this work on my 16ft bayliner with outboard
This is not a boat specific item, so you would need to check the dimensions of the product to your boat and see if it will work. There is not a listing of boats that this fits. You need to physically measure the area on your boat.
Date published: 2015-09-23
What type of base is required and is it included or sold seprately? What are the requirements for mounting the base that the pylon connects to. Does it need to be bolted through the floor of the boat or will screws work?
hi, the base is included with it. it should be thru bolted with big washers or an under plate. thanks.
Date published: 2015-09-23