5 0
Overton's Splash Island Grommet Kit
Item No. 321522
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 57ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Details

Overton's Splash Island Grommet Kit

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 40ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 321522
$18.99 $19.99
Save $1.00 ( 5% Off )
Product Actions

This item is currently not available.

Additional Information
This replacement grommet features a two-piece design for easy installation and secure attachment. The grommet kit includes a 5' bungee cord with looped end for securing your Splash Island to your drift anchor. The two-piece grommet fits any Overton's Splash Island or floating mat up to 2.3" thick. Durable injection-molded nylon construction.


How To Install The Splash Island Grommet and Bungee Cord with Attachment Loop

Follow these instructions for simple installation of your Splash Island Grommet.

1. Identify the top and bottom pieces of the grommet. The bottom half of the grommet has a larger opening, while the top half has a smaller fitting with clips that fits inside the opening on the bottom piece. The top piece also has notches in the hole for holding the attachment cord in place.

2. Once you've determined the bottom piece of the grommet, insert this half of the grommet through the hole in your Splash Island from the bottom side of the mat. (Remember the top of the mat has the logo printed on it.)

3. Lay the bottom side of the mat on a hard surface and insert the top half of the grommet through the hole from the top of the mat.

4. Firmly push the top half of the grommet into the bottom half until you hear a click. For the thinner 3-layer Splash Island, insert until you hear 2 or 3 clicks.

5. Insert the looped end of the bungee cord attachment through the top of the grommet. You'll need to pinch the cord together tightly to fit it into the opening on the grommet. Pull the attachment loop and bungee cord all the way through the grommet.

6. Line up the tabs on the black plastic end of the attachment loop with the notches in the top of the grommet. Push the plastic end into the grommet until it snaps in place.

You are now ready to attach your drift anchor and start enjoying your Splash Island Mat. Please remember, the bungee cord attachment loop should only be used for attaching the Splash Island to a drift anchor. Never tow your Splash Island or attach it to a boat or dock.
Show moreShow less
  • Replacement grommet for all Splash Island Mats
  • Easy-to-install two-piece design
  • Includes attachment loop for easy tie-up
  • Fits any floating mat up to 2.3" thick
Unit Weight 0.40 lb
Brand Overton's
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getReviews, 38ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};

There is no hole in my water Mat to insert grommet

Asked by: Dougie
This grommet was designed to be used on the 3, 4 and 5 layer Splash Islands. We do not recommend that you use this grommet on other mats, it could vold your warranty.
Answered by: Isaac
Date published: 2017-06-12

How do I remove a grommet

Asked by: Lovemom
You first pop the center bungee piece out. It is held in with a tab. Then look through the hole and you’ll see that one grommet piece has teeth and the other has receptacles. The two pieces can be separated by prying the teeth out of the receptacles and separating.
Answered by: Isaac
Date published: 2017-05-30

How do I take out the existing grommet?

Asked by: Connecticut
Follow these instructions for simple installation of your Splash Island Grommet. 1. Identify the top and bottom pieces of the grommet. The bottom half of the grommet has a larger opening, while the top half has a smaller fitting with clips that fits inside the opening on the bottom piece. The top piece also has notches in the hole for holding the attachment cord in place. 2. Once you've determined the bottom piece of the grommet, insert this half of the grommet through the hole in your Splash Island from the bottom side of the mat. (Remember the top of the mat has the logo printed on it.) 3. Lay the bottom side of the mat on a hard surface and insert the top half of the grommet through the hole from the top of the mat. 4. Firmly push the top half of the grommet into the bottom half until you hear a click. For the thinner 3-layer Splash Island, insert until you hear 2 or 3 clicks. 5. Insert the looped end of the bungee cord attachment through the top of the grommet. You'll need to pinch the cord together tightly to fit it into the opening on the grommet. Pull the attachment loop and bungee cord all the way through the grommet. 6. Line up the tabs on the black plastic end of the attachment loop with the notches in the top of the grommet. Push the plastic end into the grommet until it snaps in place. You are now ready to attach your drift anchor and start enjoying your Splash Island Mat. Please remember, the bungee cord attachment loop should only be used for attaching the Splash Island to a drift anchor. Never tow your Splash Island or attach it to a boat or dock.
Answered by: Isaac
Date published: 2017-07-22

The rope connected to the grommet is broken, but not the actual grommet. Do I still need to replace the grommet?

Asked by: concernedMom
Yes, that would be best.
Answered by: Isaac
Date published: 2017-05-26

Can I add a second grommet to the other end of my splash island pad?

Asked by: Josh
This is not recommended by the manufacture, it will void the warranty. This grommet is a replacement for one that is broken.
Answered by: Isaac
Date published: 2017-04-17

What is this for?? I bought a splash island, do I need this?

Asked by: Susie
This is a replacement kit if you break your grommet.
Answered by: Isaac
Date published: 2017-04-04

Does this work with the original water Matt also

Asked by: Dan
Not that I know of, this grommet kit was designed for the Slash Island.
Answered by: Isaac
Date published: 2016-06-27

when will you get more in stock

Asked by: abyss721
  • y_2020, m_10, d_25, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_321522, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_overtons
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getContent, 97ms
  • questions, product