Overton's Deluxe Back-to-Back Lounge Boat Seat with 10" Base
Item No. 300199
Images
Details
https://www.overtons.com/overtons-deluxe-back-to-back-lounge-boat-seat-with-10-base-300199.html
Overton's Deluxe Back-to-Back Lounge Boat Seat with 10" Base
Overton's Deluxe Back-to-Back Lounge Boat Seat with 10" Base is rated
out of
5 by
244.
Item No. 300199
$179.99
Compare at $219.99
Variations
-
1. Select Color
-
Additional Information
The great-looking design of Overton's Deluxe Back-to-Back Lounge Boat Seats will help add a splash of style to your boat. The high-impact plastic frames and bases are virtually indestructible and are built to stand up to years of use. High-density foam provides outstanding comfort, while the 26-oz. marine-grade vinyl with UV inhibitors resists mildew and fading. There's also additional storage space beneath the seats. Overton's Deluxe Boat Seats come with a three-year warranty on the upholstery and a six-year warranty on the frame.
Back-To-Back Lounge Seat with 10" Base
• Base: 36"L x 13.25"W x 10"H
• Seat: 41.5"L x 18"W x 28.25"H
• Seat Depth: 14.5"
• Fully reclined: 65"L
• Seat weight: 39 lbs.
Please order item #315382 for a free vinyl sample swatch card.
Show moreShow less
Back-To-Back Lounge Seat with 10" Base
• Base: 36"L x 13.25"W x 10"H
• Seat: 41.5"L x 18"W x 28.25"H
• Seat Depth: 14.5"
• Fully reclined: 65"L
• Seat weight: 39 lbs.
Please order item #315382 for a free vinyl sample swatch card.
Overton's Deluxe Back-to-Back Lounge Boat Seat with 10" Base is rated
out of
5 by
244.
Rated 1 out of
5
by
Bill from
This is a review of the base assembly instructions
It appears that the instruction sheet attempts to be a one size fits all situation. If you buy this unit the black cross piece closest to the front end needs to be installed FIRST and then slide the front piece into the sides. If you fail to install this and you follow the directions you will fail. Also, it tells you to remove 2 screws but there are 4 so remove ALL FOUR.
Date published: 2018-05-24
Rated 3 out of
5
by
Alvin from
Poor quality
Had to make lots of adjustments its ok if you don't use your boat alot
If you have a small boat it would be ok
Date published: 2017-08-08
Rated 1 out of
5
by
JStone from
Extremely cheap base and very small
I purchased these seats as replacements for the original seats out of a 1994 Sunbird Corsair 180 (slight rip in driver seat). At first glance they looked great. Putting together the plastic base started my concern as it felt low quality. I installed the seats and they are smaller than expected (I am 5'7 and small for me). Back rest is very upright with a small seat, not comfortable. Also the plastic gives quite a bit rocking back and forth from the seat. I would not buy these again.
Date published: 2016-06-12
Rated 1 out of
5
by
Ryan from
Very Disappointed
These seat are very low quality, very uncomfortable, and unstable. I broke one of the seat about 5 minutes after it was installed, ripped the two mounting braces right out the base. Shape of these seat doesn't fit your bottom when seating in, the back rest is too up right and the bottom pad is too short, feel like your butt is sliding off the seat all the time. Note I'm only 5'7", I can't imagine a 6'5" person could even fit on these. Shortly after installation of the seat, I was wiggling them trying to see why so squeaking and wobble when the one broke, did not take much effort at all, as I was not trying to break off the brand new seats. The what appears to be sticking in the vinyl, the 3 ribs down the middle of the seat, is just stamped in not real. The vinyl itself just feels cheesy, not deluxe at all. The way these seat fold out is the worse I've ever seen, it is great if you like smashing your fingers, and the storage space under the seat is very hard to get at with the way the seats operate, they don't lock midway to allow access to under the seat, up or down is the only place they kind of stay. I will not be putting these seats in my boat, the ones that came out of my boat that are 15 years old are still nicer then these.
Date published: 2016-05-13
Rated 3 out of
5
by
The raquetteman from
Flimsy base
Good ordering process. Knowledgeable order tech. Order held until future ship date. Arrived very quickly. Product: Seats have good materials and are attractive, but There was no hardware to fasten seat to boat floor. The small screws supplied for assembly are too small to work. No amount of fastening to the floor prevented these bases from twisting and turning when in use. They are simply too lightweight plastic, and little cross bracing. I would not recommend.
Date published: 2015-08-24
Rated 4 out of
5
by
Hunter Len from
I would buy this product again! Exactly what I was looking
I installed these seats in my 21ft boat. They are comfortable and easy to clean.
Date published: 2015-08-21
Rated 4 out of
5
by
surfer from
Good looking seat
The color of the seats and style was perfect match for 2005 bayliner bowrider. They actually are a nicer looking style then the original. The quality of the frame is not as good as original, they aren't as sturdy, but at the price with overtons 15% off and free shipping I can live with it.
Date published: 2015-08-03
Rated 4 out of
5
by
Doyle the boater from
Easygoing and comfortable
Restoring a 1977 19' beachcraft ski boat
Date published: 2015-07-23
What does the backorder mean? Do you have any in stock? Wanting to order to redo my boat this winter.
Backorder means there is a delay in manufacturing. We would still be able to take orders and as the seats are manufactured, they will be sent out.
Date published: 2017-09-17
Do the Storage space/base stay dry when it rains?
The seats do not seal so water may get in the storage area.
Date published: 2017-10-12
Do I have to use the base? Because my boat already has a base connected to the boat.
You should be able to connect the seat, but if there is any modification to the seat itself, it would void the warranty.
Date published: 2018-10-18
See a lot of reviews say the base is to much plastic and flimsy and not durable has this been improved? Also I'm not sure on what height to get the 8 inch or 10 inch?
We have not heard of any issues with the bases recently. Depending on the dimensions on the space where this seat will sit is where you would need to decide on a 10" or 8" base.
Date published: 2017-09-04
Will this fit a 2002 Four Winns Freedom 170?
Our seats are not boat specific. They are based on dimensions.
Date published: 2017-08-26
Does this come with the mounting bracket?
No
Date published: 2017-08-18
Do you ship to Alaska
Thank you for your question.
Products can be shipped to Alaska.
Date published: 2017-02-28
Will these fit a 16ft. Berliner Capri
Thank you for your question.
The seats in question will work if your boat does not have the built in seat bases.
If your model does in fact have the molded in bases...please look at the lounge seats below:
http://www.overtons.com/modperl/product/details.cgi?pdesc=Bayliner-Deluxe-Back-Back-Boat-Seat-Top-Wise&i=38404
Date published: 2017-06-04