Lenco Edge Mount Trim Tab Kit w/LED Indicator Switch Kit - 9" x 9"
$664.99
Ship to Home
Delivery time calculated in checkout
Delivery time calculated in checkout
- This item is currently not available
Free Standard Shipping
This item is excluded from all discounts and promotions.
Minimum order quantity of
1
Maximum order quantity of
100
Must purchase in increments of
1
Return Policy
We believe in offering the very best value, quality, and selection. Plus, we want you to enjoy your purchase! In the event you wish to send a product back to us, you may return most unused items for a refund or exchange, minus shipping, within 90 days from the date of purchase unless noted below under exceptions and exclusions. Refunds are issued to the original form of payment.
Features
Lenco Edge Mount Trim Tab Kits are based on electric, instant-response actuators. Actuator speed is precise and controllable so there are no surprises at top speeds. Thermoplastic actuator housing is made from a UV-resistant nylon that is 50% glass fiber reinforced. Electro-polished blades and back plates are made from 12-gauge 304 stainless steel. Lenco electric trim tab kits draw only 5 amps. Kits are offered without a switch kit, with a Standard Tactile Switch Kit, or with an LED Indicator Tactile Switch Kit. 12V.
Kit Includes:
• 2 Actuators w/6' leads and Deutsch plugs
• 2 Edge mount blades
• Two 20' actuator extension wiring harnesses
• 2 Upper mounting brackets with gland seal
• 2 Lower mounting brackets
• Stainless steel mounting hardware included
Lenco 101 Actuator - Lenco Actuators are fully submersible, maintenance-free, and sealed for life. Freely rotating ballscrew with 12 ball bearing at both ends of its stroke eliminates the need for limit switches and clutches. High quality components and design contribute to Lenco Actuators' long life and high strength.
• 12V
• 2-1/4" stroke
• 12-1/8" long overall
• 5/16" stainless steel bolts
• Corrosion-proof Vandar mounts
• Stainless steel ram
• Double O-ring
• Self-locking ballscrew
• Precision molded metal alloy gears
• High-torque motor that transfers 750 lbs.
• UV-resistant nylon, 50% glass fiber reinforced for a thermoplastic housing
• Top cap gland seal protecting outer cable jacket and internal conductors
• 6' leads with Deutsch connectors
Edge Mount Blade - Requires less transom height than Standard Mount Blades
• 12-gauge 304 stainless steel
• Electro-Polished
• 1" turned up edges
• 85° taper on inside
• 1/8" diameter hinge pin
Lenco LED Indicator Tactile Switch Kit -Feature two LED indicator lights, allowing you to see the exact position of both port and starboard trim tabs. An advanced photochromic eye automatically reads ambient light and adjusts the brightness of the LED indicators for optimum viewing in any light. Waterproof kit has self-contained, sealed keypad and control box. A built-in retracting feature automatically returns tabs to a fully retracted position when power or tach signal is removed.
• Self-Check at power up
• Fade/smuge-proof laser engraved graphics
• Plug & play switch wiring harness connector
• Backlit keypad, 2-3/4" x 2-3/4"
• Solid state control box with Deutsch connections
• Includes 36" power pigtail
Kit Includes:
• 2 Actuators w/6' leads and Deutsch plugs
• 2 Edge mount blades
• Two 20' actuator extension wiring harnesses
• 2 Upper mounting brackets with gland seal
• 2 Lower mounting brackets
• Stainless steel mounting hardware included
Lenco 101 Actuator - Lenco Actuators are fully submersible, maintenance-free, and sealed for life. Freely rotating ballscrew with 12 ball bearing at both ends of its stroke eliminates the need for limit switches and clutches. High quality components and design contribute to Lenco Actuators' long life and high strength.
• 12V
• 2-1/4" stroke
• 12-1/8" long overall
• 5/16" stainless steel bolts
• Corrosion-proof Vandar mounts
• Stainless steel ram
• Double O-ring
• Self-locking ballscrew
• Precision molded metal alloy gears
• High-torque motor that transfers 750 lbs.
• UV-resistant nylon, 50% glass fiber reinforced for a thermoplastic housing
• Top cap gland seal protecting outer cable jacket and internal conductors
• 6' leads with Deutsch connectors
Edge Mount Blade - Requires less transom height than Standard Mount Blades
• 12-gauge 304 stainless steel
• Electro-Polished
• 1" turned up edges
• 85° taper on inside
• 1/8" diameter hinge pin
Lenco LED Indicator Tactile Switch Kit -Feature two LED indicator lights, allowing you to see the exact position of both port and starboard trim tabs. An advanced photochromic eye automatically reads ambient light and adjusts the brightness of the LED indicators for optimum viewing in any light. Waterproof kit has self-contained, sealed keypad and control box. A built-in retracting feature automatically returns tabs to a fully retracted position when power or tach signal is removed.
• Self-Check at power up
• Fade/smuge-proof laser engraved graphics
• Plug & play switch wiring harness connector
• Backlit keypad, 2-3/4" x 2-3/4"
• Solid state control box with Deutsch connections
• Includes 36" power pigtail
- Electric actuators respond instantly
- Electro-polished blades are stainless steel
- 12V actuator is fully submersible
- Edge Mount tabs require less transom height
- Includes LED Indicator Tactile Switch Kit
Specs
Unit Weight
0.00 lb
Brand
Lenco Marine
MFG Part No.
29283
800-700-1366
