Kicker PXA200.2 Two-Channel Amplifier
Item No. 321220
Images
Kicker PXA200.2 Two-Channel Amplifier
Details

Kicker PXA200.2 Two-Channel Amplifier

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 98ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 321220
$189.99 $199.99
Product Actions

In Stock

Additional Information
The Kicker PXA200.2 is a high-power, low-draw amplifier that's great for open air listening environments. Incredibly small footprint created for powersports vehicles, boats, ATVs, or any vehicle with a small 12V charging system. Differential audio circuit reduces engine noise in the audio system for low Total Harmonic Distortion and superb sound clarity at high volumes.

Weather-resistant, conformal-coated circuit board. No-rust, stainless steel mounting hardware and a single Molex plug containing all wiring connections make for easy installation.

The PXA Amp utilizes a speaker (amplified) or low (pre-amp) level input, variable input gain adjustment, and two auto turn-on modes (DC offset or 12-volt trigger).

PXA200.2 Two-Channel Amplifier
• 100 watts RMS x 2 @ 1 ohm
• 50 watts RMS x 2 @ 2 ohms
• 25 watts RMS x 2 @ 4 ohms
• Frequency response: 10Hz - 20kHz
• Signal-to-Noise Ratio: 95dB
• Input Sensitivity: 125mV-5V (low level) / 250mV-10V (high level)
• Electronic Crossover: Selectable HI or OFF / 60Hz, 80Hz, or 120Hz / 12dB/octave slope
• 7"L x 1-5/8"H x 3-7/16"W
Show moreShow less
  • Great for open air listening environments
  • Small footprint is perfect for boats and ATVs
  • Weather-resistant, conformal-coated circuit board
  • Easy installation
  • 50 watts RMS x 2 @ 2 ohms
  • Dimensions 7"L x 3.44"W x 1.63"H
    Functions 2-Channel Amplifier
    Remote Control No
    Waterproof Rating Water-resistant
    Wattage 100 W
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 9ms
    • reviews, product
    • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 64ms
    • questions, product
    • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};