Additional Information
This innovative hatch offers a no-mess, deck seal system that sheds water naturally. Designed with water-resistant in-laid gasket, rigid rib design for both vertical and horizontal use, hidden fastener, stainless steel hinges, and UV-resistant saralon resin that stands up to harsh marine elements. 11-1/4" x 21-1/4" cut-out size.
Show moreShow less
Innovative 13" x 23" Hatch is rated
out of
5 by
6.
Rated 4 out of
5
by
jjv from
Hatch
Happy
Date published: 2015-05-08
Rated 5 out of
5
by
Mike the Fish Slayer from
ABSOLUTELY PERFECT
I HAD SUN DAMAGED HATCHES ON THE BACK OF MY BOAT & WANTED TO REPLACE THEM, BUT COULD NOT FIND THE RIGHT SIZE UNTIL I CHECKED OVERTON'S. PERFECT FIT & LATCHES SMOOTHLY & SECURELY & ONE HAND OPERATION.
Date published: 2012-06-11
Rated 5 out of
5
by
Maine Coast from
Great product!
I purchased this product for a fiberglass seat box I made for my boat over the winter. It was the perfect size for the project. It's easy to clean, doesn't leak, and looks great. It's been through some bumps, both on the water and on the trailer, and the latches hold up great. The build of the hatch is very strong. Dispite it's large size, it will not twist or bend. When it's closed and locked, it actually adds structural stability to the box. Installation is a breeze, even on board with limited space. I also have several other sizes and products by this manufacturer, and you really can't go wrong. I am completely satisfied.
Date published: 2011-06-14
Rated 5 out of
5
by
wade from
This is a very good product
The hatch is a very good product, very durable and looks good.
Date published: 2010-08-06
Rated 5 out of
5
by
scott2335 from
Very Good Value
I replaced five hatches of a similar size with these. (First I bought three, then I liked them so much I decided to get two more). I am very pleased with the color and fact that they have stainless steel hinges in this price range. Warning: do not use the template to make the openings for the hatches, use the hatch itself.
Date published: 2008-12-29
Rated 5 out of
5
by
Dr. Crappie from
Great buy...Sturdy Product!
I installed the hatch lid on a Todd Console that I also bought from Overton's. I'll use this for storage as well as access to the console wiring. It works great!!
Date published: 2008-12-23
would this hatch be suitable around the engine area with heat and noise? I have a sailboat. The access to my engine area is very limited. considering installing a hatch to give me more access to be able to work on my engine.
Yes. The manufacturer states that the Innovative 13" x 23" Hatch should be fine as an engine access hatch unless the door will be directly beside the the exhaust or heat exchanger. You will need to add a soundproofing backing to the hatch door to reduce the noise.
Date published: 2017-01-26
this will be used for in deck hatch want is the rating for pounds of support
The Innovative 13" x 23" Hatch has a weight limit of 250 pounds but it is recommended that the hatch not be in a high traffic area.
Date published: 2016-12-13
Is there a drop in tub that you can purchase separate?
No. The manufacturer of the Innovative 13" x 23" Hatch does not offer a drop in tub for this hatch.
Date published: 2016-05-09
Does the hatch include a liner? If so ,what is the size of the liner?
Hello Rob, No. The Innovative Product Hatch does not come with a liner. Thank you, Steve
Date published: 2015-09-23
Does this comes with the SS screws needing to mount the hatch?
Hello Saul, No. The mounting hardware is not included with the hatch. Thank you, Steve
Date published: 2015-09-23