Garmin Reactor 40 Hydraulic Autopilot Core Pack With SmartPump
This item is excluded from all discounts and promotions.
Solid-State 9-Axis Attitude Heading Reference System
With its advanced solid-state, 9-axis Attitude Heading Reference System (AHRS), you are able to mount the GHP Reactor nearly anywhere, in any orientation. In addition, this system greatly minimizes heading error, course deviation, rudder movement, and power consumption, while providing a more comfortable ride for all onboard.
Reacts to Conditions
This amazing autopilot actually reacts to the sea to hold your course. Even when the boat is pitching and rolling in rough water, you can remain confident that the GHP Reactor autopilot will keep you on your desired course.
Minimal Commissioning And Calibration
All autopilots require commissioning and calibration - all of them. However, Garmin took what is normally a 20 minute process and reduced it to as little as 5 minutes. That's the power of simple.
Full Integration with Garmin Chartplotters
You have full control of the GHP Reactor from your chartplotter display. Combined with a compatible Garmin networked chartplotter and BlueChart g2 Vision charts, you can enjoy optional features like Auto Guidance, which automatically steers GPS paths.
Experience the One-Pump Solution
The GHP Reactor with SmartPump puts an end to choosing the right pump size for your particular boat. One SmartPump works for most boats. You know you have the right pump for your boat for optimum control and confidence. Plus, you get complete control in a smaller size with better thermal performance, higher reliability, and lower power consumption. It also includes color-coded connectors to make it very easy to install.
Limit the Maximum Flow Rate
The GHP Reactor with SmartPump automatically adjusts the maximum flow rate for a particular boat from 0 to 2.4L per minute. Because the GHP Reactor with SmartPump uses a brush-less motor, there is no direct electrical connection between the drive circuit and the rotor. This provides for increased reliability, longer pump life, reduced power consumption, quiet operation, a smaller package, improved thermal performance, and higher efficiency.
Eliminate Risk of Rudder "Hard-Over"
The GHP Reactor with SmartPump is a complete autopilot package. SmartPump is one integrated unit comprised of a motor drive circuit with the pump in a single assembly. Equipped with Intelligent Rudder Rate Technology (IRRT), it actually slows the rudder rate when the vessel is at high speeds and speeds up rudder rate when the vessel is at lower speeds to provide optimal performance and safety in all conditions. The brush-less motor drive eliminates the risk of rudder hard-over due to hardware or software failures.
Enjoy a Longer-Lasting System
Boating environments are harsh, especially on saltwater. So the Garmin SmartPump is protected from the elements. SmartPump is engineered from corrosion-resistant components, including anodized aluminum and nickel-plated steel parts.
Experience Advanced Autopilot Technology
With a GHP Reactor with SmartPump onboard, you can have control wherever you are on the boat. In addition to holding its course in virtually all weather and wind conditions, the system can smoothly perform a variety of pre-programmed trolling and search procedures. Plus, with a compatible Garmin networked chartplotter and BlueChart g2 Vision charts (sold separately), you gain optional features like Auto Guidance, which automatically steers GPS paths.
Stay in Control with Shadow Drive Technology
The GHP Reactor with SmartPump features patented Shadow Drive technology. This gives you the security of knowing you maintain control, even when the autopilot is engaged. The Shadow Drive system automatically disengages the autopilot if the helm is turned, giving you the freedom to maneuver the boat. The autopilot automatically re-engages when you hold a steady course.
Connect to Networked Devices
The GHP Reactor Autopilot with SmartPump for hydraulically steered boats is operated using up to 3 GHC helm control units. The GHC communicates with the autopilot system via your NMEA 2000 network, so autopilot-heading data can be shared easily with other devices. This enables MARPA and chart overlay when connected to a Garmin chartplotter. An optional handheld wireless remote control is also available. However, for the highest level of convenience, control the GHC using quatix, the world's first marine GPS navigation watch featuring ANT+T wireless technology.
Add Even More Peace of Mind
Add an optional GRF 10 rudder feedback sensor and you can further enhance the performance of your GHP Reactor autopilot with SmartPump.
• Dimensions (H x W x D): 7-3/4" x 7-1/2" x 9-5/8"
• Weight: 16.5 lbs.
• Temperature range: From 5°F to 131°F
• Construction: aluminum alloy with carbon steel bracket
• Power cable length: 9 ft (2.7 m)
• Power input: 11.5-30V DC
• Fuse: 40 A, blade-type
• Main power usage: standby - less than 1 A; engaged - 5-10 A; peak - 34 A
• Flow rate: Configurable from 0 to 2.4 L per minute
• Compatible with steering cylinder sizes from 4-24 cu. in.
• Dimensions: 3-19/32" diameter
• Weight: 5.6 oz.
• Temperature range: From 5°F to 131°F
• Construction: Fully gasketed, high-impact plastic
• Waterproof to IEC 529 IPX7 standards
• CCU cable length: 9.5 ft
• NMEA 2000 power input: 9-16V
• NMEA 2000 LEN: 3 (150 mA)
What's in the box:
• Reactor 40 CCU (Course Computer Unit)
• GHC 20 helm control display
• ECU (Electronic Control Unit) power cable
• Interconnect cable
• Shadow Drive
• NMEA 2000 drop cables (2 meters)
• NMEA 2000 power cable
• NMEA 2000 T-connectors
• Male and female terminators
• GPSMAP Series
• GPSMAP 8500/8530 Black Box
- Advanced marine technology for the boating public
- Eliminates heading error and rudder movement
- Minimal commissioning and calibration times
- Full integration with Garmin chartplotters