Dockmate "D" Profile, 16' roll
Item No. 300189
Images
Dockmate "D" Profile, 16' roll
Details

Dockmate "D" Profile, 16' roll

Dockmate "D" Profile, 16' roll is rated 4.6 out of 5 by 7.
  • y_2019, m_2, d_20, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_300189, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_overtons
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 78ms
  • reviews, product
Item No. 300189
$40.49 $44.99 Compare at $59.99
Variations
Product Actions
Select Styles for Availability
Additional Information
Dockmate Complete Dock and Boat Protection System
The next time your boat comes into your slip or alongside your dock during adverse conditions, or perhaps with a less experienced hand at the helm, you'll be glad you have the advantage of Dockmate Profiles to protect your boat and dock. Prevent expensive damage to boat and dock and protect your hull against unsightly scratches and hard-to-remove scuff marks with Dockmate Profiles. Dockmate Profiles are constructed of flexible, marine-grade PVC which will not chip or crack from temperature extremes and are unaffected by oil, gas, or saltwater. UV inhibitors prevent yellowing and deterioration from sunlight to help maintain a clean, professional appearance. This heavy-duty profile has a full backing for strength and lasting endurance. Mounting screws sold separately. Typical installation requires about 4 screws per running foot, mounted 6"-8" apart at top and bottom.

The versatile, strong "D" Profile is designed without a lip so it can be mounted horizontally or vertically anywhere on your dock face or pilings.

• 3"H x 1"D
• Non-kinking 16' roll
Show moreShow less
  • Profiles constructed of flexible, marine-grade PVC
  • Will not chip/crack from extreme temperatures
  • Resist damage from water, oil, salt, UV rays
  • Heavy-duty profile has full backing
  • Sold in a 16' roll
  • Dimensions 3" x 16'
    Dockmate "D" Profile, 16' roll is rated 4.6 out of 5 by 7.
    Rated 4 out of 5 by from Not sure what this is asking for! Product has significant roll memory which made installation of 12" vertical bumper strips very difficult. Even after warming the product in hot sunshine, after securing to dock sides, the top and bottom still curl outward. Might consider reversing the roll with the flat side opposite your current shipping location so the top and bottom will be easier to attach and the memory confined to the center of shorter strips.
    Date published: 2015-04-23
    Rated 5 out of 5 by from It works Easy to install, woked well for my use.
    Date published: 2015-03-25
    Rated 4 out of 5 by from East to intall this completes my dock.
    Date published: 2014-08-06
    Rated 5 out of 5 by from Dependable "D"Profile Keeps my pontoon boat free from dock dings!
    Date published: 2013-07-16
    Rated 5 out of 5 by from Dock mate bumper Easy to install. My 10 year old nephew helped me and uses a drill better than I !! Will protect boats docking parallel to our slip.
    Date published: 2012-07-04
    Rated 4 out of 5 by from Works well on our dock We put these on the outside of our dock on the poles facing our pontoon boat. They work well to prevent nicks/dents that may occur from hitting into the dock.
    Date published: 2010-06-01
    Rated 5 out of 5 by from excellent quality excellent product. [...]
    Date published: 2009-08-29
    • y_2019, m_2, d_20, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_7
    • loc_en_US, sid_300189, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_overtons
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 8ms
    • reviews, product

    What is the width, will it mount on 2 by 4 or a 2 by 6 board?

    Asked by: Cobbo
    3" high so it can be mounted on a 2x4
    Answered by: mtripp
    Date published: 2018-06-21

    What do you recommend for the distance between screws?

    Asked by: John
    Typical installation requires about 4 screws per running foot, mounted 6"-8" apart at top and bottom.
    Answered by: mtripp
    Date published: 2018-06-21

    What's the best way to cut this product into lengths?

    Asked by: J_S_1
    Per the manufacturer, a sharp hand saw will cut through this material.
    Answered by: Amanda
    Date published: 2018-06-21

    what is width and depth ?

    Asked by: john
    This 16' roll is 3"H x 1"D.
    Answered by: Michael
    Date published: 2017-02-07

    what is width and depth ?

    Asked by: john stone
    This Dockmate bumper is 3" high X 1" deep and is sold in 16' rolls.
    Answered by: Michael
    Date published: 2015-09-24

    There are 2 sizes of end plugs which does this take? In the manual it gave #'s but I see nothing that matches those #'s.

    Asked by: Deb
    Use this plug: http://www.overtons.com/modperl/product/details.cgi?pdesc=Dock-Edge-Small-End-Plug-4-Pack&i=94536&r=view&from=grid
    Answered by: Anonymous
    Date published: 2018-06-21

    Do you sell the matching end caps and corner connectors?

    Asked by: Steven
    This profile does not have a matching end cap or corner available. If you want a finished look you can miter the corner so the two pieces join flush. Or you can purchase a universal corner bumper like item 73612, 74624 or 80527. Item 73612 is our most popular choice and provides extra protection on the entire outside corner.
    Answered by: Product Expert
    Date published: 2018-04-27

    Does this include mounting screws?

    Asked by: Anonymous
    Mounting screws are sold separately (item # 34391)
    Answered by: Ryan
    Date published: 2018-06-21
    • y_2019, m_2, d_20, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_9
    • loc_en_US, sid_300189, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_overtons
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 92ms
    • questions, product