3M Marine Adhesive/Sealant Fast Cure 4200, 1/10 gal. cartridge
Item No. 315638
3M Marine Adhesive/Sealant Fast Cure 4200, 1/10 gal. cartridge is rated
out of
5 by
3.
Details
https://www.overtons.com/3m-marine-adhesivesealant-fast-cure-4200-110-gal.-cartridge-315638.html
3M Marine Adhesive/Sealant Fast Cure 4200, 1/10 gal. cartridge
$24.69
$25.99
Save $1.30
(
5% Off
)
Additional Information
Features
This one-part general purpose polyurethane delivers strong, flexible bonds. Bonds and seals fiberglass, gelcoat, and wood. Ideal for rubrails, stern joints, deck and through-hull fittings, and access plates. Medium strength allows for disassembly. Shipped ground only.
Show moreShow less
- Delivers strong, flexible bonds
- Medium strength allows for disassembly
Specs
Coverage | 1/8" bead = 120 linear feet |
---|---|
Cure Time | 24.00 hr |
Curing Mechanism | 75 degrees at 50% humidity |
Dry Film Thickness | 0.13 mm |
Paint/Finish Type | Polyurethane |
Unit Weight | 0.86 lb |
Brand | 3M |

WARNING: This product can expose you to CHEMICALS-C, a chemical known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
This one-part general purpose polyurethane delivers strong, flexible bonds. Bonds and seals fiberglass, gelcoat, and wood. Ideal for rubrails, stern joints, deck and through-hull fittings, and access plates. Medium strength allows for disassembly. Shipped ground only.
Show moreShow less
- Delivers strong, flexible bonds
- Medium strength allows for disassembly
Coverage | 1/8" bead = 120 linear feet |
---|---|
Cure Time | 24.00 hr |
Curing Mechanism | 75 degrees at 50% humidity |
Dry Film Thickness | 0.13 mm |
Paint/Finish Type | Polyurethane |
Unit Weight | 0.86 lb |
Brand | 3M |

WARNING: This product can expose you to CHEMICALS-C, a chemical known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Rated 5 out of
5
by
Alan F from
Strong yet flexible
Recently had some quick release bases fabricated to the legs of my flats boat poling platform. Im now able to take the platform on and off with ease to open up rear deck space for a back deck fisherman. Applied 4200 fast cure to bottom of the detachable bases and spread to a thin layer before securing to the deck. it pressed outward as I tightened all hardware and any excess was wiped clean. After curing it has done a great job waterproofing the screw holes, anchoring the platform down, and slightly buffering vibration to the platform, which got rid of what litttle noise came from the hardware that mounts the top side of the platform...an all around win!
Date published: 2018-11-18
Rated 5 out of
5
by
Don from
A great sealant
Best for marine use
Date published: 2009-12-29
Rated 4 out of
5
by
Igor from
Easy to use and clean-up
Was useful in completing the task that I had before me.
Date published: 2008-11-17