5 0
Toon-Brite Protective Clear Coat, Quart
Item No. 320749
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 66ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Images
Toon-Brite Protective Clear Coat, Quart
Details

Toon-Brite Protective Clear Coat, Quart

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 39ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 320749
$26.99 $29.99
Save $3.00 ( 10% Off )
Additional Information
Use this protective clear coat on boats, RVs, and most metal and fiberglass surfaces, and get years of protection against oxidation, stains, UV rays, weathering, and corrosion. This marine-grade coating is formulated for use on painted or primed ferrous metal surfaces, galvanized or stainless steel, bare or anodized aluminum, other non-ferrous metals, wood tile, fiberglass, and so much more. Will resist saltwater, acid rain, bird droppings, bugs, chemicals, and other damaging agents.

Clear-Coat is easily applied using a 3"-4" foam brush, or it can be sprayed using an HVLP-type sprayer. Clear-Coat will not chip, crack, or peel. One quart of Clear-Coat will cover approximately 200-300 sq.ft. Note: Clear-Coat is not an anti-fouling paint.
Show moreShow less
  • Excellent for protecting boats and RVs
  • Guards against oxidation, stains, and UV rays
  • Can be used on most surfaces
  • Resists saltwater, acid rain, and chemicals
Unit Weight 2.20 lb
Brand Toon-Brite
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getReviews, 38ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};

 Will this product yellow 

Asked by: Art
This product protects against oxidation and yellowing from UV rays.
Answered by: Amanda
Date published: 2017-09-02

How well does this product work o a polished aluminum hull?  Will it dull the shine? And, how London will it last?

Asked by: LT Dan
Toon-brite, Protective Clear-coat will work after polishing & leave a great polished finish, However you must follow a few steps after polishing. 1-make sure to give polish enough time to completely dry. 2-wipe down with cotton cloths to remove any residue & or powder. 3-wipe down using acetone. Finally, test on small area to make sure Clear-coat lays down nicely and no beading occurs. Beading means surface is not clean enough.
Answered by: Carlie
Date published: 2017-09-02
  • y_2020, m_9, d_21, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_320749, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_overtons
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getContent, 78ms
  • questions, product