Additional Information
Features
Engineered for strength, durability, and simplicity! Made of hot-dipped galvanized steel. Stationary dock hardware is designed with 7/16" holes for 3/8" carriage bolts.
Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent leg base plate for increased stability. 2-1/4" I.D. 5-1/4"L x 5-1/4"W x 2-3/8"H.
Click here for layout and application examples
Show moreShow less
Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent leg base plate for increased stability. 2-1/4" I.D. 5-1/4"L x 5-1/4"W x 2-3/8"H.
Click here for layout and application examples
- Made of hot-dipped galvanized steel
- May be bolted to a 2" x 6" piece of lumber
- 5-1/4"L x 5-1/4"W x 2-3/8"H
Specs
Dimensions | 5.25"L x 5.25"W x 2.375"H |
---|---|
Unit Weight | 1.30 lb |
Brand | Dockmate |
Reviews
Q & A
Engineered for strength, durability, and simplicity! Made of hot-dipped galvanized steel. Stationary dock hardware is designed with 7/16" holes for 3/8" carriage bolts.
Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent leg base plate for increased stability. 2-1/4" I.D. 5-1/4"L x 5-1/4"W x 2-3/8"H.
Click here for layout and application examples
Show moreShow less
Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent leg base plate for increased stability. 2-1/4" I.D. 5-1/4"L x 5-1/4"W x 2-3/8"H.
Click here for layout and application examples
- Made of hot-dipped galvanized steel
- May be bolted to a 2" x 6" piece of lumber
- 5-1/4"L x 5-1/4"W x 2-3/8"H
Dimensions | 5.25"L x 5.25"W x 2.375"H |
---|---|
Unit Weight | 1.30 lb |
Brand | Dockmate |
Rated 5 out of
5
by
mike 2 from
dock hardware
good product
Date published: 2010-06-15
Rated 4 out of
5
by
Tom from
Product is as described.
AS described
Date published: 2010-06-08
Regarding item # 75874, Can you please tell me what is the distance, on center, between each of the carriage bolt holes?
Distance is 3 1/2 inches.
Date published: 2015-09-23
What is the inside diameter of these? What do most use for posts? Galv. or aluminum? Where are these posts most readily found? Thanks!
ID is 2 1/4"
Date published: 2015-09-23
Is this product meant to hold 2" PVC pipe which is used to guide boat on toboat lift??
This is made for pole style docks, not boat lifts. You would need something to give the PVC more support if you were going to use this as a boat lift guide bracket. We have a boat lift guide kit that is designed for I-beam style credle bunks. See item 79535.
Date published: 2015-09-23