Sierra Ignition Switch For Mercury Engine, Sierra Part MP52000
Item No. 318908
Images
Sierra Ignition Switch For Mercury Engine, Sierra Part MP52000
Details

Sierra Ignition Switch For Mercury Engine, Sierra Part MP52000

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 66ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 318908
$33.24 $34.99 Compare at $47.99
Product Actions

In Stock

Additional Information
This Sierra Ignition Switch is designed for exact OEM replacement installation. Ideal for DFI, EFI, and MPI engines. Features heavy-duty potted construction, minimal bleed per circuit, and molded umbrella-type key.

Sierra Ignition Switch MP52000
• Replaces Mercury 87-88107A5
• 3-Position Magneto - OFF-RUN-START
• Push To Choke

Specs
• Material: Polyester
• Length: Short. 5/8" maximum panel thickness
• Terminal Type: 6 color-coded wire leads/potted
• Back-Up Nut: Plastic
• Face Nut: Hex Black Plastic Face-Nut
• Hole Size: 7/8"

• Rated @ 12v DC:
Ignition: 15 Amps
Solenoid: 30 Amps
Choke: 7 Amps
Show moreShow less
  • Sierra Part MP52000
  • Replaces Mercury 87-88107A5
  • 3-Position - OFF/RUN/START
  • Push To Choke
  • 6 Color-Coded Wire Leads/Potted
  • Unit Weight 0.40 lb
    Brand Sierra
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 13ms
    • reviews, product
    • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};

    Will this work to replace switch and chock button on a 1979 50hp mercury

    Asked by: Tim
    This should work for your application.
    Answered by: Amanda
    Date published: 2017-08-23

    I'm looking at this switch Item # 751844 as well as the item number 27962 switch and questioning if these will be able to replace the one in my Quick silver 2831 shift throttle control system on my 1982 mercury 40 hp 2 stroke motor?

    Asked by: Bob
    I would recommend the Mercury Ignition Switch (control box) (Item # 27962) since you are replacing the switch in your control box.
    Answered by: Steve
    Date published: 2016-10-10

    Will this switch work for a 2005 Mercury Saltwater 150 outboard? Thanks

    Asked by: Andrew
    Yes. The Sierra Ignition Switch For Mercury Engine, Sierra Part MP52000 will work with your application.
    Answered by: Steve
    Date published: 2016-08-18

    Sierra Part #MP52000 need a schematic for this switch hooking it up to a 1966 mercury 500 control box thanks in advance

    Asked by: Leroy
    Hello LeRoy, This is the wiring color code for this ignition switch: Red = Battery Black = Magneto Ground Yellow w/ Red Stripe = Solenoid Black w/ Yellow Stripe = Magneto Purple = Ignition Yellow w/ Black Stripe = Choke Purple w/ White Stripe = Accessory Thank you, Steve
    Answered by: Anonymous
    Date published: 2015-09-23

    150 saltwater carb. old switch has 10 wires, a guess if i even need to replace it. boat runs great for 10 min. then runs rough until i turn switch 1/2 off.

    Asked by: mike
    • y_2019, m_3, d_22, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_5
    • loc_en_US, sid_318908, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_overtons
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 8ms
    • questions, product