The link to Raymarine SeaTalkNG Backbone Cable - 20m has been copied
In a SeaTalkNG installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part# A06030, a backbone extender (sold separately). 20m (65 ft.) long. Part#: A06037.
Backbone cable runs through the length of the boat
Individual devices are connected by spur cables
Backbone carries data/power to attached devices
Cable is 20m (65 ft.) in length
You May Also Like
Are you sure you want to remove the following product from the cart?