Additional Information
Features
Made from soft black polymer, this pole storage clip features a UV-stabilized construction for longer-lasting use in the marine environment. Fits 3/4" or 7/8" diameter tubing. Requires #10 PH screw size. 3/4" x 2-1/4" x 1-5/8".
Show moreShow less
- Made from soft black polymer
- UV-stabilized construction
- Fits 3/4" and 7/8" diameter tubing
- Requires #10 PH screw size
Specs
Unit Weight | 0.12 lb |
---|---|
Brand | Perko |
Reviews
Q & A
Made from soft black polymer, this pole storage clip features a UV-stabilized construction for longer-lasting use in the marine environment. Fits 3/4" or 7/8" diameter tubing. Requires #10 PH screw size. 3/4" x 2-1/4" x 1-5/8".
Show moreShow less
- Made from soft black polymer
- UV-stabilized construction
- Fits 3/4" and 7/8" diameter tubing
- Requires #10 PH screw size
Unit Weight | 0.12 lb |
---|---|
Brand | Perko |
Rated 5 out of
5
by
Heath from
On boatside while docking.
Work perfectly and keep my kook handy while docking. Also holds securely when running in rough seas
Date published: 2019-10-13
Rated 4 out of
5
by
Eric from
Good for holding mop and deck brush
These work well for storing mops, deck brushes or brooms too that are 3/4 to 7/8 in diameter. Packaging says #10 P.H screws -- use pan head wood or sheet metal screws. The thickness of the clip from the inner bottom curve to the flat mounting back is 3/4 inch, including a 3/8 recess for the screw to seat below the curved surface to avoid contacting pole. Flat head/tapered seat can be used but take care not to over drive them or the screw head will pull through the bottom of the bore -- i had to use stainless 3/16 tapcon flat head screws to mount into a concrete block, hex heads are too big.
Date published: 2019-08-01