Overton's Two-Step Trailer Step
Item No. 317247
Images
Details
https://www.overtons.com/overtons-two-step-trailer-step-317247.html
Overton's Two-Step Trailer Step
Overton's Two-Step Trailer Step is rated
out of
5 by
11.
Item No. 317247
$79.99
$99.99
Compare at $129.99
Save $20.00
(
20% Off
)
Additional Information
Features
A convenient way to access any trailered boat. Easily mounts on winch stand with a stainless steel U-bolt that allows adjustment up or down. Constructed of thick satin-finished aluminum. 3" wide steps with built-in tread and corner protectors. Fits most frames up to 4" x 4". U-bolts are 4.5"W center-to-center and 5"L with 1/2" thread. Step measures 15.5"H x 12"W. 300-lb. capacity. Mounting hardware included.
Show moreShow less
- Provides easy access to your trailered boat
- Mounts on winch stand with U-bolt
- 3" steps with built-in tread
- 300-lb. capacity
Specs
| Unit Weight | 10.00 lb |
|---|---|
| Brand | Overton's |
Reviews
Rated 5 out of
5
by
Stief from
Excellent Trailer Ladder
Many of the reviews here said that the U bracket didn’t fit their winch stand. I expected this may also be an issue for me because I have a 4 x2” stand but I decided to order it. It arrived the day before the first estimated delivery day. Sweet! The bracket was longer than the width of the stand so I needed a new bracket. Instead, I was able to buy a brass spacer tube to fill the space inside the threads. The tubes came in different thicknesses so I purchased the thickest one for strength plus two extra washers. As this may sound confusing I’m inclosing two pictures.
This bracket is outstanding. I have looked at many others and custom ones, all are FAR more expensive. This one is perfect for me.
Date published: 2019-08-14
Rated 4 out of
5
by
chuckiep from
Sturdy boat trailer Step/U bolt problem
Very paractical solution for loading and unloading boat solo. Only provblem is my mounting pole was 3"X3" and the provided U bolt was too big. Had to get a 31/8" X4 stainless u bolt. Also My set up required to me to drill 2 new holes higher on center bracket of step to work. See pictures. Very sturdy no rust aluminum. I like it.
Date published: 2019-05-30
Rated 5 out of
5
by
Fred B from
Excellent
Great for us older guys to getting boat back on trailer and walking down
steps to secure bow strap
Date published: 2016-10-31
Rated 5 out of
5
by
N/A from
The right purchase
This product turned out to be exactly what I wanted and needed!
Date published: 2015-06-03
Rated 5 out of
5
by
John T. from
Great product , works perfectly
Works great when I trailer and launch my boat alone.I can get in and out of my boat while it's on the trailer without help from anyone.
Date published: 2015-03-30
Rated 5 out of
5
by
SKEEZIX from
A STEP UP!!!!!!!!!
BOUGHT AN 18 FT BOAT THAT WAS HARD TO BOARD FROM THE BOW WHEN LAUNCHING. I INSTALLED OVERTONS TWO STEP TRAILER STEP AND AM ABLE TO STEP RIGHT UP AND OVER THE BOW WITH NO PROBLEMS AT ALL. THE ALUMINUM STEP FRAME AND THE STAINLESS STEEL UBOLT SUPPLIED, ARE IMPERVIOUS TO SALT WATER AND RUST. IF I MUST MAKE A SUGGESTION IT WOULD BE FOR THE MANUFACTURER TO DRILL MORE HOLES IN THE BRACKET SO THE ANGLE OF THE STEPS CAN BE CHANGED TO SUIT EACH SITUATION. Great PRODUCT!!!!!!!!!
Date published: 2014-10-11
Rated 3 out of
5
by
semperfarr from
Does not fit a 3x3" winch post
The product description says it fits a winch post up to 4x4" but there was too much slack around my 3x3" winch post and it wouldn't install correctly. I have to send it back for a refund unfortunately. The description is misleading.
Date published: 2014-04-29
Rated 5 out of
5
by
Scott from
Very very very nice
I had to notch it out to slide around the bracket that holds the winch but I like the use the tools in my shop every now and then, this is a great product and I highly recommend.
Date published: 2013-12-10
Q & A
Hi I have A Nitro Savage 884 on a a Nitro trailer would this work on my trailer! Year 1996
I apologize but we do not have a way to reference that. The step fits most frames up to 4" x 4".
Date published: 2017-07-10
Will the Overton's Two-Step Trailer Step attach to a 2 1/2" X 1 1/2 in winch stand. I have an EZ Loader trailer for my 15' Lund boat
Yes. The Overton's Two-Step Trailer Step works with most EZ Loader trailers. However yo may have to purchase a different size U-bolt.
Date published: 2016-08-02