Overton's 12V High-Pressure Inflator Deflator
Item No. 109572
Images
Details
https://www.overtons.com/overtons-12v-high-pressure-inflator-deflator-109572.html
Overton's 12V High-Pressure Inflator Deflator
Overton's 12V High-Pressure Inflator Deflator is rated
out of
5 by
43.
Item No. 109572
$40.49
$49.99
Additional Information
Featuring heavy-duty construction and a large-diameter hose, this 12V pump inflates and deflates large-volume inflatables faster than conventional electric pumps. The high-pressure design inflates up to 2.8 psi. Comes with a wide selection of nozzles that are sure to fit almost any valve. 9' long power cord with alligator clips for direct connection to your battery. 2' long hose. Pumps 23.5 cubic feet of air per minute.
Show moreShow less
| Deflate | Yes |
|---|
Overton's 12V High-Pressure Inflator Deflator is rated
out of
5 by
43.
Rated 5 out of
5
by
LoriH from
Works Great
Pump worked great!! So fast and easy to use!! Filled a three person tube in minutes!
Date published: 2017-09-07
Rated 5 out of
5
by
Kevin from
Expensive but worth the money
This is an excellent, heavy duty inflator. It quickly handles one person, and three person tubes. I like the air hose and the assortment of fittings. It comes with alligator connectors. My only recommendation would be to manufacture it with a longer cord with a 12 volt cigarette lighter type connector.
Date published: 2017-09-04
Rated 4 out of
5
by
huntslobster from
works well
i bought this in the fall, and did not use until the following summer. the yellow tube cracked immediately, so i replaced it with west marine clear water tube (i wish i had gone a little longer). cord could be a little longer - i use this on a 21' center console so the cord doesn't reach to the deck in the front - blows up the super brawler in no time
Date published: 2017-08-16
Rated 5 out of
5
by
carrieb from
Small, but mighty!
Happy with this inflator; it took 20 minutes to fill a floating island (11 feet across) Its loud, but worth it!! Great price, too.
Date published: 2017-08-09
Rated 5 out of
5
by
beaster from
WOW
I was so tired of noisy pumps which take soo long to inflate the larger toys and they are burned out by the end of the season. I purchased this early in the year and was able to use it this weekend...WOW. The only pain is connecting it to your battery...but so well worth it. Its fast and pumps up your toys to a pressure where I thought it was going to pop. I just recommended it to an office mate as well.
I wish the configuration of how the nozzles are bundled together was different. One of my nozzles broke away from the string...a longer string would help and help keep the other nozzles out of the way when filling your toys.
Lets see if it hold its performance until the end of the year.
Date published: 2017-08-02
Rated 4 out of
5
by
Trev5501 from
Great little pump
This pump serves the exact intended purpose for which I bought it. Any larger inflatable can be blown up at our destination as opposed to towing it wherever we go. It is a little loud but I expected that based on other reviews. I would recommend this product.
Date published: 2017-07-10
Rated 5 out of
5
by
Nick from
Great Pump
Pumps work well for blowing up tubes on the water.
Date published: 2016-12-05
Rated 5 out of
5
by
Ringshank from
The inflation time is reduced by 1/2 with this bab
Less time blowing up toys means more time chilling
Date published: 2016-08-24
What is the air volume per minute rating.
Per the manufacturer, this pump pushes 23.5ft3/min.
Date published: 2018-02-28
Do you sell replacement alligator clips?
Yes! They are item# 1086763.
Date published: 2017-08-27
Would this blow a raft boat?
This will inflate up to 2.8 psi
Date published: 2017-08-08
will this pump handle inflating the Escape Bouncer ?
Yes, or if you want a pump with a little more air flow, you could also try our Turbo pump (item # 44123)
Date published: 2017-06-20
Is it best for the boat engine to be running while using the inflator?
absolutely. I would also verify your alternator output so you don't ruin that while running the pump.
Date published: 2017-06-08
There are small holes at both ends of the hose that allow a lot of air to leak when inflating. Do these serve any purpose? Are they supposed to be covered when inflating?
These holes serve the purpose of allowing air to flow and not restrict in the small valve opening to the point where it backs up and causes the pump to overheat. Air friction going out also heats up the end where you typically hold the adapter while inflating a product, so by having these 2 holes and allowing air to escape, it reduces the amount of heat produced there as well.
Date published: 2017-07-12
Will this work on H3 valves? Thank you.
This pump is not recommended for H3 valves like what comes on a lot of the inflatable paddle boards. This pump has a 2.8 psi rating and most iSUP's require an average of 12-15 psi or more.
Date published: 2016-09-19
Will this pump work to inflate a big brawler tube?
Yes, this will work with all of our towable tubes. It comes with multiple adapters to fit multiple valve setups.
Date published: 2016-09-19