Mooring Snubber, fits 1/2" - 3/4" line
Item No. 315208
Mooring Snubber, fits 1/2" - 3/4" line is rated
out of
5 by
9.
Images
Details
https://www.overtons.com/mooring-snubber-fits-12---34-line-315208.html
Mooring Snubber, fits 1/2" - 3/4" line
$47.75
$54.99
Compare at $59.99
Save $7.24
(
13% Off
)
Additional Information
Features
Durable Mooring Snubbers are unharmed by saltwater, ozone, and UV rays. No knots to tie, no rubber to rot. 20" L. Fits 1/2" - 3/4" diameter mooring line.
The Dock Edge DE90306F Mooring Snubber forces the line is exposed to, are taken up by the elongation of the mooring snubber, which reduces the load on the line as well as the boat's hardware.
Features:
• For secure and cushioned mooring from premium materials for extended lifespan
• Ideal for sailing and motor boats and built in compliance with strict industry standards
• Designed to reduce the shock load and meet your marine needs
Show moreShow less
The Dock Edge DE90306F Mooring Snubber forces the line is exposed to, are taken up by the elongation of the mooring snubber, which reduces the load on the line as well as the boat's hardware.
Features:
• For secure and cushioned mooring from premium materials for extended lifespan
• Ideal for sailing and motor boats and built in compliance with strict industry standards
• Designed to reduce the shock load and meet your marine needs
- Unharmed by saltwater, ozone, UV-rays
- 20" long
- Fits 1/2" - 3/4" mooring line
Specs
| Unit Weight | 1.95 lb |
|---|---|
| Brand | Dockmate |
Reviews
Q & A
Durable Mooring Snubbers are unharmed by saltwater, ozone, and UV rays. No knots to tie, no rubber to rot. 20" L. Fits 1/2" - 3/4" diameter mooring line.
The Dock Edge DE90306F Mooring Snubber forces the line is exposed to, are taken up by the elongation of the mooring snubber, which reduces the load on the line as well as the boat's hardware.
Features:
• For secure and cushioned mooring from premium materials for extended lifespan
• Ideal for sailing and motor boats and built in compliance with strict industry standards
• Designed to reduce the shock load and meet your marine needs
Show moreShow less
The Dock Edge DE90306F Mooring Snubber forces the line is exposed to, are taken up by the elongation of the mooring snubber, which reduces the load on the line as well as the boat's hardware.
Features:
• For secure and cushioned mooring from premium materials for extended lifespan
• Ideal for sailing and motor boats and built in compliance with strict industry standards
• Designed to reduce the shock load and meet your marine needs
- Unharmed by saltwater, ozone, UV-rays
- 20" long
- Fits 1/2" - 3/4" mooring line
| Unit Weight | 1.95 lb |
|---|---|
| Brand | Dockmate |
Rated 5 out of
5
by
RTU from
Great product! Would definitely buy again.
Works great! Easy to install and definitely helps with securing my boat
Date published: 2021-02-14
Rated 4 out of
5
by
Luna Sea from
Tight Fit
My dock lines are premium triple braided 5/8" (MFG # 4050-20-00025). I am confident that once I get these snubbers in place they will work great. The snubbers are for 14 - 18 millimeter lines. 3/4" is 19.05 mm so these snubbers are too small for 3/4". 5/8" converts to 15.87 mm and I am worried that because of the difficulty pulling even these through the holes in the snubbers will damage the lines. These are the largest snubbers available on this site or I would go bigger. 5/8" triple braid are a very tight fit for these snubbers.
Date published: 2012-02-04
Rated 5 out of
5
by
dawn morning star from
works great
easy to use
Date published: 2011-08-25
Rated 4 out of
5
by
R from
Looks like they will work
Our new boat is in winter storage. It is bigger than our last boat, and we ordered snubbers when we saw how the docklines were straining with wind and waves.
Date published: 2009-12-16
Rated 5 out of
5
by
Mo Fisch Mike from
The perfect Snubber
These snubbers are just what you need for peace of mind with your moorage. The marina where my boat is tied up gets wind from all directions. Almost every boat moored here uses these very same snubbers and for good reason, they flat work. Will work with almost any diameter rope, I use 1/2 on all four lines. The best part? They sell for over TWICE as much locally!!! [...]
Date published: 2009-07-09
Rated 5 out of
5
by
Batman from
Superior mooring product
I use four of these to secure my MasterCraft Maristar 215 (@22' long, 4000lbs wakeboard boat) to floating docks on Rough River Lake, KY. My dock gets hit with constant wave activity. These snubbers really helped reduce shock/strain on my cleats and dock. Makes walking on the floating dock safer. The description indicates any line up to 3/4" can be used. That's not really true - you need rope that is 9/16" - 3/4" thick. I highly recommend you use premium dock rope -[$] The premiun braided line also stretches for some give. That's what I'm using - works great!
Date published: 2009-05-30
Rated 5 out of
5
by
Bass Hauler from
Works terrifically--as expected
Use three of them on my dock lines--for bow, stern ad mid ship. Provides slight "cushion of stretchability" to allow for irregular waves, wind gusts, and currents. Would highly recommend it.
Date published: 2009-05-27
can this be used on an already made up line, that is ith loops and splices finished?
The rope has to be threaded through the holes on both ends of the snubber. Your rope will need to have a free end that has a diameter from 1/2" to 3/4". A loop or knotted section will not thread through the holes.
Date published: 2020-10-20
Would this work for keeping a jet ski away from the dock as it is sitting in the water?
No. This is used on your dock line to add "spring" to the line to take some of the energy and force away from the cleats and line. You will need something like a mooring whip (item 74601) if you are trying to keep the jetski off the dock without tying off both ends.
Date published: 2020-06-03