MOB+ Wireless Man-Overboard Cutoff Switch
This item is excluded from all discounts and promotions.
- In Stock
The system consists of an xHUB that's easily mounted on or near the boat console and a wearable xFOB. The two communicate wirelessly with each other to stop the engine when the xFOB is submerged in water or is beyond range of the xHUB. Up to four xFOBs (only one included) can be connected to the xHUB at the same time, with one unit acting as the captain's stop unit and the additional three as alarm units for passengers. The xFOB can be worn on your wrist, around your neck, or clipped to your life jacket using either the xBAND or xTAG accessories (sold separately). The waterproof xFOB is powered by an easy-to-change standard coin cell battery with more than 300 hours of battery life. The xHUB connects to your boat power (12V-24V) and to your engine stopping system. It's intuitive and easy-to-use with a one-click user interface. Compatible with all major outboard and most sterndrive engines.
Alarm Only or Alarm/Stop
Choose to connect an xFOB with alarm only or stop and alarm functionality. This unique feature enabled with the revolutionary WiMEA Protocol allows you to have any combination of alarm or stop functionality for your passengers, crew, or pets on board. Easily switch pilots while driving. Secure any kids or pets on board with either an alarm only or have the engine stop if they fall overboard.
MOB (Man Overboard) Mode
The MOB+ will automatically shut down the engine when the STOP xFOB is submerged in 4" of water or travels out of range from the xHUB.
Sound and Flashing Light
When a FOB goes overboard, the xHUB sounds an alarm and flashes red in the light circle accompanied by flashing on the respective FOB's indication bar. This allows for identification of which connected FOB has fallen overboard.
After six seconds, the system automatically activates Override Mode. In Override Mode, any passenger or crew on board can restart the engine without the need to interact with the MOB+ system. This allows for a quick recovery of the missing person in the water and enhances safety.
Restart Enhanced Man Overboard Safety Feature
The system automatically reengages the kill switch six seconds after a man overboard event to allow any remaining passengers on board to restart the engine as normal without having to engage with the xHUB in the boat.
Secure Marine Wireless
The WiMEA (Wireless Marine Electronics Algorithm) is a highly advanced marine security protocol and digital data processing system utilizing high-speed link and Unique ID Technology. It operates across several frequency channels and has 4D Antenna Diversity to avoid interference and unintended signal blocking. This makes it virtually impossible for any other wireless system to interfere with the operation of a WiMEA Wireless System.
• xHUB requires a standard 2-1/16" diameter opening for mounting on console or a bracket.
• xHUB is wired to the boat's 12/24V DC power and to your current kill switch wires.
• xHUB Power Consumption: Active Mode: 180mA (2.5W max. at 13.8Vdc). Standby: <30mA, <0.4W max. at 13.8V.
• MOB+ xHUB
• Connection Cable
• External Antenna
• MOB+ xFOB
• Four butt splices for cable connections
• End Cap
• User Manual
- Wireless system stops engine if you fall overboard
- Use alarm only or alarm/stop engine
- Connect up to 4 FOBs at the same time
- xHUB easily mounts on or near console
- Intuitive one-click user interface