Megaware SkegGuard, Mercruiser Bravo I, III '90-present
Item No. 315876
Megaware SkegGuard, Mercruiser Bravo I, III '90-present is rated
out of
5 by
14.
Details
https://www.overtons.com/megaware-skegguard-mercruiser-bravo-i-iii-90-present-315876.html
Megaware SkegGuard, Mercruiser Bravo I, III '90-present
$76.89
$94.99
Compare at $109.99
Save $18.10
(
19% Off
)
Additional Information
Features
SkegGuard can be used to protect and prevent damage to your motor skeg, as well as to repair or replace an already broken skeg. Constructed of high-quality 316 stainless steel, SkegGuard has an extra reinforced wear tab where the skeg is most vulnerable. This 2.5mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. SkegGuard can be installed on a lower unit with as little as 2" of skeg remaining. Secured with self-locking hardware, SkegGuard can be installed in less than ten minutes with simple tools. Its mirror-polished finish creates a custom look. 3-year warranty.
APPLICATIONS
Mercruiser
'90-present Bravo I, III
Show moreShow less
APPLICATIONS
Mercruiser
'90-present Bravo I, III
- High-quality 316 stainless steel
- 2.5mm thickened lower plate
- Can be installed in less than ten minutes
- 3-year warranty
Specs
Unit Weight | 2.30 lb |
---|---|
Brand | Skeggard |
Reviews
Q & A
SkegGuard can be used to protect and prevent damage to your motor skeg, as well as to repair or replace an already broken skeg. Constructed of high-quality 316 stainless steel, SkegGuard has an extra reinforced wear tab where the skeg is most vulnerable. This 2.5mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. SkegGuard can be installed on a lower unit with as little as 2" of skeg remaining. Secured with self-locking hardware, SkegGuard can be installed in less than ten minutes with simple tools. Its mirror-polished finish creates a custom look. 3-year warranty.
APPLICATIONS
Mercruiser
'90-present Bravo I, III
Show moreShow less
APPLICATIONS
Mercruiser
'90-present Bravo I, III
- High-quality 316 stainless steel
- 2.5mm thickened lower plate
- Can be installed in less than ten minutes
- 3-year warranty
Unit Weight | 2.30 lb |
---|---|
Brand | Skeggard |
Rated 5 out of
5
by
supernomad from
skagg guard
good clean look and quality fit. included hardware was nice could have been harder material but still ok.
Date published: 2015-12-17
Rated 5 out of
5
by
Myhammer from
Excellent Product
This was a great investment, there was one on the Boat when I bought it and it did it's job protecting the drive leg when I forgot to trim the drive all the way up and scraped the ramp. It had only slight damage but no damage to the drive. I choose to replace it with a new one.
Date published: 2015-05-22
Rated 5 out of
5
by
dog-in-the-pound from
"What a deal"
This is one of the most important prooducts you can put on your boat. I installed it in less than 10 minutes.Looks great and protects your outdrive skagg from damage.
Date published: 2014-02-24
Rated 5 out of
5
by
Mike Slaney from
Does the Job
I used the product to cover a badly damaged skeg on my Bravo 3 outdrive with duo stainless props. I found it easy to install however it did partially cover the oil drain plug. I used a die grinder to remove enough material so the plug could be removed and problem solved. It looks great, especially with the stainless props. I would highly recommend this product.
Date published: 2013-07-03
Rated 4 out of
5
by
C.C. from
Installed easily
I rated it 4 stars only because the fit on my Bravo 1 outdrive is very slightly loose. Other than that it was very easy to install. It looks great and it performs well.
Date published: 2012-07-27
Rated 4 out of
5
by
Chris from
Skeg tastic!
Adds a nice look to the out drive, matches my bravo 3 dual SS props. Got it to help with low speed wander but have not seen much improvement. What I did get was amazing high speed turn control. You have to be careful because if you've come to expect sliding into turns you will get tossed when your boat makes a 90 on a hard turn. Even though it was a loose fit the screws pulled it in tight.
Date published: 2012-06-27
Rated 5 out of
5
by
DJ's Crownline from
SkegGuard Restores Quality Look
The SkegGuard is a GREAT improvement over the missing pieces of the skeg which was damaged when loading the boat at a boat landing. Would have liked to see better instructions as to the ACTUAL positioning of the SkegGuard as when I installed, the top edge of the guard was extremely close to covering the drain plug for the lower unit lube.
Date published: 2012-06-13
Rated 3 out of
5
by
Bill from
Attachment hardware unacceptable
The special screws that were included to attached the skeg guard were too short and of poor quality. I had to purchase my own stainless steel hardware to attached the guard to my lower unit.
Date published: 2012-06-04