Maretron Fuel Flow Sensor
$546
Shipping
- Ships from vendor
- Delivery to Change Address
- Delivery Fee Details
This item is excluded from all discounts and promotions.
Minimum order quantity of
1
Maximum order quantity of
100
Must purchase in increments of
1
Shipping Restrictions
Shipping for this item is not available to Canada, Alaska or Hawaii
Return Policy
We believe in offering the very best value, quality, and selection. Plus, we want you to enjoy your purchase! In the event you wish to send a product back to us, you may return most unused items for a refund or exchange, minus shipping, within 90 days from the date of purchase unless noted below under exceptions and exclusions. Refunds are issued to the original form of payment.
Features
The Maretron Fuel Flow Sensor is for use with the FFM100 Fuel Flow Monitor. When fluid passes through the sensor, the rotors turn. Magnets which are located in the rotors will pass across sensors in the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow rate calculations based on the received pulses.
• Flow Range: 25 to 500 LPH (6.6 to 132 GPH)
• Nominal K Factor: 400 pulses/L (1514.2 pulses/Gal)
• Operating Temperature: -40°C to 80°C (-40°F to 176°F)
• Storage Temperature: -65°C to 170°C (-85°F to 338°F)
• Port Size: 1/4” NPT Female
• Strainer Size: 200 Mesh (If not already installed after fuel filter)
• Cable Length: 1m (3.28 ft)
• Weight: M1AR: 775g (1.71 lb), M2AR: 755g (1.66 lb).
• Dimensions: 74 x 71 x 48.6 mm (2.91 x 2.80 x 1.91 in.)
• Flow Range: 25 to 500 LPH (6.6 to 132 GPH)
• Nominal K Factor: 400 pulses/L (1514.2 pulses/Gal)
• Operating Temperature: -40°C to 80°C (-40°F to 176°F)
• Storage Temperature: -65°C to 170°C (-85°F to 338°F)
• Port Size: 1/4” NPT Female
• Strainer Size: 200 Mesh (If not already installed after fuel filter)
• Cable Length: 1m (3.28 ft)
• Weight: M1AR: 775g (1.71 lb), M2AR: 755g (1.66 lb).
• Dimensions: 74 x 71 x 48.6 mm (2.91 x 2.80 x 1.91 in.)
- For Use With FFM100 Fuel Flow Monitor
- Flow Rate: 25 To 500 LPH
- 1000 PSI Maximum Operating Pressure
- 1/4 Inch NPT Female Port
- Compatible With Fuel, Lubricating Oil, Hydraulic Fluid, Clean Petroleum Based Products
Specs
Unit Weight
3.00 lb
Brand
Maretron
MFG Part No.
M2AR
800-700-1366
