Additional Information
Features
CHIRP Fishfinder with GPS
• Easy-to-use 3.5" color fishfinder with built-in, high-sensitivity GPS
• Find fish; mark and return to hot spots, docks and ramps
• Convenient keypad operation
• Includes CHIRP transducer (77/200kHz and 200W)
Finding fish is easier than ever with Striker 4 fishfinder. Mark and return to your hot spots, boat ramps, and docks. You also can share your favorite waypoints and routes with other Striker and echoMAP combos. Smooth Scaling graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable.
Experience the Clarity of CHIRP
Striker 4 includes a Garmin CHIRP transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.
Mark Spots with High-Sensitivity GPS
Unlike regular fishfinders, Striker fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps, and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.
Navigate Easily with Waypoint Map
Since the Striker fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark, and navigate to locations such as brush piles, stumps, and docks. It's also a great tool for finding your way back to the boat ramp.
Check Your Speed On Screen
You can quickly and easily see your boat speed on the screen of your Striker fishfinder. This is a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.
Fish Vertically with Built-In Flasher
Striker provides you with both a fishfinder and flasher all in one unit. Anytime you're stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.
Garmin Striker 4 Specs
• Overall: 3.6" x 5.9" x 1.6"
• Display size: 3.5" diag. (2.9"H x 1.9"W)
• Display resolution: 480 x 320 pixels
• Display type: HVGA color
• Weight: 8.1 oz.
• Water rating: IPX7
Sonar Frequencies and Specs
• CHIRP 77/200kHz
• Transmit Power: 200W RMS
• Maximum Depth: 1600' freshwater / 750' saltwater
Other Features
• Bottom lock
• Water temperature log and graph
• Split-screen zoom
• Ultrascroll displays fish targets at higher speeds
• Fish Symbol ID helps identify fish targets
• AutoGain minimizes clutter
• Adjustable depth line
• A-Scope
• Water temp sensor included
In The Box
• Striker 4
• Dual-beam transducer
• Transom and trolling motor mounts
• Tilt/swivel mount
• Power cable
• Documentation
Show moreShow less
• Easy-to-use 3.5" color fishfinder with built-in, high-sensitivity GPS
• Find fish; mark and return to hot spots, docks and ramps
• Convenient keypad operation
• Includes CHIRP transducer (77/200kHz and 200W)
Finding fish is easier than ever with Striker 4 fishfinder. Mark and return to your hot spots, boat ramps, and docks. You also can share your favorite waypoints and routes with other Striker and echoMAP combos. Smooth Scaling graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable.
Experience the Clarity of CHIRP
Striker 4 includes a Garmin CHIRP transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.
Mark Spots with High-Sensitivity GPS
Unlike regular fishfinders, Striker fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps, and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.
Navigate Easily with Waypoint Map
Since the Striker fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark, and navigate to locations such as brush piles, stumps, and docks. It's also a great tool for finding your way back to the boat ramp.
Check Your Speed On Screen
You can quickly and easily see your boat speed on the screen of your Striker fishfinder. This is a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.
Fish Vertically with Built-In Flasher
Striker provides you with both a fishfinder and flasher all in one unit. Anytime you're stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.
Garmin Striker 4 Specs
• Overall: 3.6" x 5.9" x 1.6"
• Display size: 3.5" diag. (2.9"H x 1.9"W)
• Display resolution: 480 x 320 pixels
• Display type: HVGA color
• Weight: 8.1 oz.
• Water rating: IPX7
Sonar Frequencies and Specs
• CHIRP 77/200kHz
• Transmit Power: 200W RMS
• Maximum Depth: 1600' freshwater / 750' saltwater
Other Features
• Bottom lock
• Water temperature log and graph
• Split-screen zoom
• Ultrascroll displays fish targets at higher speeds
• Fish Symbol ID helps identify fish targets
• AutoGain minimizes clutter
• Adjustable depth line
• A-Scope
• Water temp sensor included
In The Box
• Striker 4
• Dual-beam transducer
• Transom and trolling motor mounts
• Tilt/swivel mount
• Power cable
• Documentation
- Built-in GPS and CHIRP sonar
- Convenient keypad operation
- Mark and return to hot spots
- Built-in flasher
- Includes CHIRP dual beam transducer
Specs
Unit Weight | 2.35 lb |
---|---|
Brand | Garmin |

WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
CHIRP Fishfinder with GPS
• Easy-to-use 3.5" color fishfinder with built-in, high-sensitivity GPS
• Find fish; mark and return to hot spots, docks and ramps
• Convenient keypad operation
• Includes CHIRP transducer (77/200kHz and 200W)
Finding fish is easier than ever with Striker 4 fishfinder. Mark and return to your hot spots, boat ramps, and docks. You also can share your favorite waypoints and routes with other Striker and echoMAP combos. Smooth Scaling graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable.
Experience the Clarity of CHIRP
Striker 4 includes a Garmin CHIRP transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.
Mark Spots with High-Sensitivity GPS
Unlike regular fishfinders, Striker fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps, and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.
Navigate Easily with Waypoint Map
Since the Striker fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark, and navigate to locations such as brush piles, stumps, and docks. It's also a great tool for finding your way back to the boat ramp.
Check Your Speed On Screen
You can quickly and easily see your boat speed on the screen of your Striker fishfinder. This is a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.
Fish Vertically with Built-In Flasher
Striker provides you with both a fishfinder and flasher all in one unit. Anytime you're stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.
Garmin Striker 4 Specs
• Overall: 3.6" x 5.9" x 1.6"
• Display size: 3.5" diag. (2.9"H x 1.9"W)
• Display resolution: 480 x 320 pixels
• Display type: HVGA color
• Weight: 8.1 oz.
• Water rating: IPX7
Sonar Frequencies and Specs
• CHIRP 77/200kHz
• Transmit Power: 200W RMS
• Maximum Depth: 1600' freshwater / 750' saltwater
Other Features
• Bottom lock
• Water temperature log and graph
• Split-screen zoom
• Ultrascroll displays fish targets at higher speeds
• Fish Symbol ID helps identify fish targets
• AutoGain minimizes clutter
• Adjustable depth line
• A-Scope
• Water temp sensor included
In The Box
• Striker 4
• Dual-beam transducer
• Transom and trolling motor mounts
• Tilt/swivel mount
• Power cable
• Documentation
Show moreShow less
• Easy-to-use 3.5" color fishfinder with built-in, high-sensitivity GPS
• Find fish; mark and return to hot spots, docks and ramps
• Convenient keypad operation
• Includes CHIRP transducer (77/200kHz and 200W)
Finding fish is easier than ever with Striker 4 fishfinder. Mark and return to your hot spots, boat ramps, and docks. You also can share your favorite waypoints and routes with other Striker and echoMAP combos. Smooth Scaling graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount plus transom and trolling motor mounting hardware and cable.
Experience the Clarity of CHIRP
Striker 4 includes a Garmin CHIRP transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers. Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.
Mark Spots with High-Sensitivity GPS
Unlike regular fishfinders, Striker fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps, and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.
Navigate Easily with Waypoint Map
Since the Striker fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark, and navigate to locations such as brush piles, stumps, and docks. It's also a great tool for finding your way back to the boat ramp.
Check Your Speed On Screen
You can quickly and easily see your boat speed on the screen of your Striker fishfinder. This is a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.
Fish Vertically with Built-In Flasher
Striker provides you with both a fishfinder and flasher all in one unit. Anytime you're stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.
Garmin Striker 4 Specs
• Overall: 3.6" x 5.9" x 1.6"
• Display size: 3.5" diag. (2.9"H x 1.9"W)
• Display resolution: 480 x 320 pixels
• Display type: HVGA color
• Weight: 8.1 oz.
• Water rating: IPX7
Sonar Frequencies and Specs
• CHIRP 77/200kHz
• Transmit Power: 200W RMS
• Maximum Depth: 1600' freshwater / 750' saltwater
Other Features
• Bottom lock
• Water temperature log and graph
• Split-screen zoom
• Ultrascroll displays fish targets at higher speeds
• Fish Symbol ID helps identify fish targets
• AutoGain minimizes clutter
• Adjustable depth line
• A-Scope
• Water temp sensor included
In The Box
• Striker 4
• Dual-beam transducer
• Transom and trolling motor mounts
• Tilt/swivel mount
• Power cable
• Documentation
- Built-in GPS and CHIRP sonar
- Convenient keypad operation
- Mark and return to hot spots
- Built-in flasher
- Includes CHIRP dual beam transducer
Unit Weight | 2.35 lb |
---|---|
Brand | Garmin |

WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Rated 5 out of
5
by
Bass fishing freak from
Good fish finder
Great for kayak fishing. Great for people with budgets
Date published: 2019-01-30
Rated 5 out of
5
by
Davedee from
Nice!
Unbelievable features for a inexpensive and easy to install device!
Date published: 2018-10-23
Rated 4 out of
5
by
eljene1 from
Nice little unit
I've only got to use this once and it worked very good for the price. Easy to go thru the setup screen and was easy to install. The gps feature is what sold me.
Date published: 2018-06-15
Rated 5 out of
5
by
thomast from
great item for the price
very easy to read color is great also great features
Date published: 2016-10-17
Can the transducer be mounted in a thru-hull configuration?
The included dual beam transducer can be transom or trolling motor mounted with the supplied hardware. Garmin mount part# 010-12357-00 will allow for In-hull installation. But if you want a thru-hull configuration, you will need to separately purchase a compatible transducer from Garmin.
Date published: 2020-04-28
I plan on mounting it on my wave runner. Do I need to tie the power directly to the battery? If so how much power will it drain from my battery?
Yes, power is tied directly to the battery.
Current Draw @ 12V: 0.23A
Date published: 2020-04-16
Is unit mountable on console of a 20' pontoon boat and will the transducer mount on the pontoon. Does it get wired directly to the dual 12 volt battery system of boat?
This unit does come with a tilt/swivel mount for the console. This unit does have to be tied directly to the 12v battery source.
Date published: 2017-12-05
does this connect to the battery to operate it? Is it fairly accurate on locating fish AND is everything displayed on screen? Does not require my phone for anything?????
The Garmin Striker 4 does try directly into your battery for power. It uses the internal GPS antenna to give you an accurate location as well as speed. The screen is customizable so you are able to select what you do see. Your phone is not required for use. The manuals are found below:
http://static.garmin.com/pumac/STRIKER_OM_EN.pdf
http://static.garmin.com/pumac/STRIKER_4_Install_ML.pdf
Date published: 2017-08-14
Does this unit display GPS coordinates on the screen?
Yes--GPS coordinates are on screen.
Date published: 2018-01-09
How long is the transducer cable?
20ft transducer cable
Date published: 2018-01-09