Floating Dock Hardware - Connector Pin
Item No. 314513
Floating Dock Hardware - Connector Pin is rated
out of
5 by
7.
Images
Details
https://www.overtons.com/floating-dock-hardware---connector-pin-314513.html
Floating Dock Hardware - Connector Pin
$8.99
$9.99
Save $1.00
(
10% Off
)
Additional Information
Features
This durable galvanized steel dock hardware is ideal for building lightweight docks. Offers a quick disconnect. Used to connect male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.
Click here for layout and application examples
Show moreShow less
Click here for layout and application examples
- Ideal for building lightweight docks
- Used to connect male and female connectors
Specs
| Dimensions | 0.75" |
|---|---|
| Unit Weight | 0.60 lb |
| Brand | Dockmate |
Reviews
Q & A
This durable galvanized steel dock hardware is ideal for building lightweight docks. Offers a quick disconnect. Used to connect male and female connectors. Galvanized 3/4" connector pin and hitch clip pin.
Click here for layout and application examples
Show moreShow less
Click here for layout and application examples
- Ideal for building lightweight docks
- Used to connect male and female connectors
| Dimensions | 0.75" |
|---|---|
| Unit Weight | 0.60 lb |
| Brand | Dockmate |
Rated 2 out of
5
by
Strauss from
good product - poor design
The hole for the retaining pin were drilled 90 degrees out of alignment. It was not possible to install the supplied retaining pin.
Date published: 2014-06-24
Rated 4 out of
5
by
John the designer! from
10 times more substantial than picture!
The product exceeded my expectations 10 fold! The pictures do not do this line justice. My dock will be there for a long time due to this entire line of cleats,corner braces, etc... that i used!
Date published: 2013-07-09
Rated 4 out of
5
by
Blue Ayes from
Connector Pins
These pins are great when coupled with the male & female hinges. Solid, sturdy product that is easy to use and simple to disconnect.
Date published: 2011-11-11
Rated 1 out of
5
by
unhappy from
pins too short
The pins are too short to engage all three fingers of the connection. I have a large dock that is over ten years old that uses your system and works great. I added a new section and the pins sent are over an inch shorter than the old ones and don't reach all the way through the connector
Date published: 2011-10-12
Rated 5 out of
5
by
Ed on the Lake from
Great System
This system makes assembling and disassembling dock sections so easy. You do need to work a bit on connecting if you are one one of the sections; I usually try to step on both sections.
Date published: 2009-05-20
Rated 5 out of
5
by
None from
I would buy this product again
I use the connector pins to hold 20' sections of my dock walk.
Date published: 2009-01-20
Rated 5 out of
5
by
Leonard Passmore from
Extend your Dock's Walkway
We rebuilt a lost walkway section and used an angle Tee connector bracket and a male piece to first reinforce the corners of the recovered walkway section. The male piece connected to the existing dock and the pin connector made joining the recovered and refurbished walkway section to the existing dock much easier than the original design using a 3/4 inch bolt.
Date published: 2008-09-17
What are the dimensions of the connector pin
3-7/8" by 2" with a 3/4" diameter.
Date published: 2017-07-18