Dockmate 48" Straight/Corner Dock Cushion
Item No. 300225
Images
Dockmate 48" Straight/Corner Dock Cushion
Details

Dockmate 48" Straight/Corner Dock Cushion

Dockmate 48" Straight/Corner Dock Cushion is rated 4.4 out of 5 by 16.
  • y_2019, m_2, d_19, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_300225, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_overtons
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 284ms
  • reviews, product
Item No. 300225
$47.99 - $71.99
Variations
Product Actions
Select Styles for Availability
Additional Information
The unique design of this dual-purpose dock cushion allows it to serve as a straight dock bumper or bend around corners for use as a corner bumper. Made from UV-resistant, marine-grade vinyl, this cushion will take a beating. Inflation valves provide simple adjustment. Mounting hardware included. Measures 4"D x 6"H x 48"L when straight.
Show moreShow less
  • Serves as straight dock bumper
  • Bends for use as a corner bumper
  • UV-resistant, marine-grade vinyl
  • Simple adjustment via inflation valves
  • Mounting hardware included
  • Dimensions 6" x 48"
    Dockmate 48" Straight/Corner Dock Cushion is rated 4.4 out of 5 by 16.
    Rated 1 out of 5 by from BIG DISAPPOINTMENT! I purchased 4 "beige" 48' Dockmate straights and 2 corner fenders three seasons ago to protect a beautiful new Cobalt boat. Out of box the bumpers looked great and were easy to install. First summer of use no issues but now they consistently leave scuff marks on my boat.. Horrible product and do not recommend unless you enjoy removing scuff marks on a regularly basis (not easy to remove might add). These fenders do not hold up to the Texas heat and definitely will leave a "scuff". I still have 2 bumpers new in the box and will be removing the 4 installed units before the next boating season. Very disappointing and do not recommend, expected much better given the relatively high price.
    Date published: 2016-11-30
    Rated 5 out of 5 by from Sturdy dock bumpers do the job After one season, these sturdy bumpers have held up well and have done a good job protecting our boat in pounding waves and our dock from novice captains. As promised they do not mark the sides of the boat. (We got them in black)
    Date published: 2015-11-11
    Rated 5 out of 5 by from Great product One of the five fenders was unable to inflate, Overtons was quick to replace with one that did.
    Date published: 2014-06-25
    Rated 5 out of 5 by from Great dock protector! We live along the main channel with a lot of wake and/or high winds. There are times on approach no matter how skilled you are, your craft will have a mind of it's own. These corner bumpers are perfect for those times! Protects your dock & your boat from excessive dings. Also great for visiting boaters that are not as experienced.
    Date published: 2014-02-06
    Rated 5 out of 5 by from looks good will install the spring very good delivery and packaging.
    Date published: 2014-01-17
    Rated 5 out of 5 by from Perfect. I just built a new dock and these bumpers finish it off perfectly. They are very sturdy but give nicely.
    Date published: 2012-07-18
    Rated 4 out of 5 by from Nice Unit Quality unit that will do a good job. Color choices made it easy to choose. Hardware was good and installation was easy.
    Date published: 2012-05-29
    Rated 5 out of 5 by from Great protection for your dock/seawall The product is perfect use on docks and seawalls where boats have the potential to bump even when pulling into a hoist. And, the product handles corners well and the ability to add air to the bumpers is a great option.
    Date published: 2011-08-10
    • y_2019, m_2, d_19, h_20
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_16
    • loc_en_US, sid_300225, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_overtons
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 55ms
    • reviews, product

    Can I cut these in half to create two 24 inch bumpers? It's not clear if the thin middle section is part of the air filled compartment. I believe they have inflation valves on each side. I am looking for matching 24in gray bumpers / this is only option

    Asked by: moomba2016
    We do not recommend cutting these. Doing so would void any warranty.
    Answered by: Amanda
    Date published: 2017-09-04

    Where do you install the air? It mentions Valves but I received 4 and no pump or instructions were provided. How much Air is advised

    Asked by: RHK
    You inflate the dock cushion with a needle like you would inflate a basketball. You should inflate them until they are firm.
    Answered by: Product Specialist
    Date published: 2017-06-28

    Will this work for vertical posts?  We pull our boat up and will leave tied to dock with significant wave action.  I am concerned abou the ribs on the bumper catching on the boat (for a vertical installation, the ribs will be horizontal)

    Asked by: Dave
    This dock bumper may work better for your application: http://www.overtons.com/modperl/product/details.cgi?pdesc=Dock-Edge-Piling-Bumper&i=714768
    Answered by: Matt
    Date published: 2016-05-20

    What diameter and length of lag screw do these bumpers ship with? Is 2x8 backing sufficient?

    Asked by: andy
    The lag screws are 1/4" diameter and 3 1/2" long. The dock cushion is about 2" thick in the recessed bolt holes so you will end up with about 1 1/2" of the screw penetrating the backing. If you torque down on it you will compress the dock cushion some and more of the screw could penetrate the backing. I'm am not sure what is behind your 2 X 8 backing but you should be fine using the included hardware.
    Answered by: Product Expert
    Date published: 2017-05-30

    Will this product work on a 4 x 4 upright post?

    Asked by: 2ruff
    Yes. The bumper is 6" wide so it will be wider than the post but with the bolts being in the center it will mount with no problem.
    Answered by: Product Expert
    Date published: 2017-05-30

    is this 4 or 6 inches in height?

    Asked by: scott
    6 inches in height
    Answered by: Anonymous
    Date published: 2015-09-23

    DOES THIS ITEM COME W/ STAINLESS STEEL MOUNTING HARDWEAR?

    Asked by: Deb
    No, it comes with Zinc hardware.
    Answered by: Matt
    Date published: 2015-09-23

    WILL THIS WORK ON METAL DOCKS?

    Asked by: Granny
    The actual product should work on a metal dock, but separate mounting hardware may be required to work with the metal dock.
    Answered by: Ryan
    Date published: 2017-04-23
    • y_2019, m_2, d_19, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_9
    • loc_en_US, sid_300225, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_overtons
    • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
    • CLOUD, getContent, 97ms
    • questions, product