Additional Information
Features
VIAIR's Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:Reducer: 1/8” (F) to 1/4” (M). 1/4” Quick Connect Stud (F). 1/4” Quick Connect Coupler (F). 1/4” 175 PSI Safety Valve. 1/4” Drain Cock. (3) 1/4” Compression Fittings. 20ft. 12-Gauge Wire with Inline Fuse Holder. 4” Strip of Continuous Grommet Material. Accessory Airline. Electrical Connections
All Fittings are NPT rated unless otherwise noted.
Show moreShow less
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:Reducer: 1/8” (F) to 1/4” (M). 1/4” Quick Connect Stud (F). 1/4” Quick Connect Coupler (F). 1/4” 175 PSI Safety Valve. 1/4” Drain Cock. (3) 1/4” Compression Fittings. 20ft. 12-Gauge Wire with Inline Fuse Holder. 4” Strip of Continuous Grommet Material. Accessory Airline. Electrical Connections
All Fittings are NPT rated unless otherwise noted.
- 2.5 Gallon VIAIR Air Tank
- 450C VIAIR Compressor
- 35ft. Coil Hose with Tire Chuck
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 145 PSI off)
Specs
Unit Weight | 32.00 lb |
---|---|
Brand | Viair Corporation |
MFG Part No. | 10007 |
Reviews
Q & A
VIAIR's Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:Reducer: 1/8” (F) to 1/4” (M). 1/4” Quick Connect Stud (F). 1/4” Quick Connect Coupler (F). 1/4” 175 PSI Safety Valve. 1/4” Drain Cock. (3) 1/4” Compression Fittings. 20ft. 12-Gauge Wire with Inline Fuse Holder. 4” Strip of Continuous Grommet Material. Accessory Airline. Electrical Connections
All Fittings are NPT rated unless otherwise noted.
Show moreShow less
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:Reducer: 1/8” (F) to 1/4” (M). 1/4” Quick Connect Stud (F). 1/4” Quick Connect Coupler (F). 1/4” 175 PSI Safety Valve. 1/4” Drain Cock. (3) 1/4” Compression Fittings. 20ft. 12-Gauge Wire with Inline Fuse Holder. 4” Strip of Continuous Grommet Material. Accessory Airline. Electrical Connections
All Fittings are NPT rated unless otherwise noted.
- 2.5 Gallon VIAIR Air Tank
- 450C VIAIR Compressor
- 35ft. Coil Hose with Tire Chuck
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 145 PSI off)
Unit Weight | 32.00 lb |
---|---|
Brand | Viair Corporation |
MFG Part No. | 10007 |