All Stainless Steel Mini Drop-In Single Horn, Low Pitch
Item No. 314676
Images
Details
https://www.overtons.com/all-stainless-steel-mini-drop-in-single-horn-low-pitch-314676.html
All Stainless Steel Mini Drop-In Single Horn, Low Pitch
All Stainless Steel Mini Drop-In Single Horn, Low Pitch is rated
out of
5 by
25.
Item No. 314676
$37.99
$39.99
Compare at $44.99
Additional Information
This durable, sealed sound unit is constructed of 304 stainless steel inside and out and comes with a 5-year rust warranty. Meets ABYC specification A-23 for boats up to 12 meters (39'). Pre-wired and designed to fit existing hole patterns. Use this low pitch horn for single installations.
Maximum amp draw: 3 amps. 106 dB rating. Horn measures 3"L x 3-1/4"W x 1-3/4"H. Grill measures 4-7/8" x 2-3/8" with 4" on centers mounting holes.
Show moreShow less
Maximum amp draw: 3 amps. 106 dB rating. Horn measures 3"L x 3-1/4"W x 1-3/4"H. Grill measures 4-7/8" x 2-3/8" with 4" on centers mounting holes.
All Stainless Steel Mini Drop-In Single Horn, Low Pitch is rated
out of
5 by
25.
Rated 5 out of
5
by
Max from
Works great
Works great. Hooked it up to a switch/fuse block. Had to look up that the wiring tabs are not polarized, so the ground and live wires can be hooked to either (for the other amateur boat electricians out there).
Date published: 2017-09-13
Rated 5 out of
5
by
Kent from
I would buy this product again.
I built a new console for my pontoon boat and installed this horn. Built to last forever out of stainless steel with a beautiful polished stainless cover. Very nice unit.
Date published: 2014-09-26
Rated 4 out of
5
by
Jeff from
Replacement horn for inboard
Replaced my horn in my Supra. Easy to install except securing it to the boat required extra work. The old horn had threaded holes to secure the screws to. The new horn didn't. I had to make a bracket to attach to the back of the horn so I could secure the horn to the boat. Not a big deal, but the horn should come with nuts and bolts in addition to screws for the most flexibility.
Date published: 2014-08-05
Rated 4 out of
5
by
Love to boat! from
Easy installation, one flaw
Installed at the beginning of season in 2012, replaced OEM that was faulty. Easy to install, had to drill new holes slightly narrower than OEM. Only down side is the speaker cloth, or whatever you might call it, is paper and only lasted two seasons. I only have the boat uncovered when I'm using it, expected the cloth to last longer. It was easy to replace.
Date published: 2014-07-20
Rated 4 out of
5
by
gee from
works great . easy install.
replacement of existing horn
Date published: 2013-10-29
Rated 5 out of
5
by
None from
I would buy this product again and again
Installatin easy, sounds great..Price was good.
Date published: 2013-05-07
Rated 4 out of
5
by
Jim from
worked perfectly
the horn was missing when I bought my boat, just a deteriorated plastic cover over the hole. This horn fit the precut hole perfectly and the chromed, metal cover finished the job. Fit is always iffy when working on an older ( 1994 ) boat.
Date published: 2012-10-19
Rated 4 out of
5
by
John from
Works well but smaller than OEM horn
Installed this horn in my SeaRay 185 bow rider. It's a solid product compared to over the counter horns available at the auto store. Reasonable sound quality, should hear you on the water in most circumstances. Needed to retrofit the hole in the hull for installation, that would be hard for someone without the right tools. Also, the horn cover is slightly smaller than an OEM part. Just barely covers the hole from the old horn. Had to drill new holes for the screws too. It appears to be a quality product and I am pleased with my purchase but if you aren't handy with tools the installation might frustrate you on this model boat.
Date published: 2012-08-21
I have this horn (Item # 35184) on my boat. It will not sound going thru switch wiring (just clunks one time) but will sound off fine when connected to battery directly. Switch checks out with current flow (test light). any help would be appreciated.
For technical assistance, please contact the Overton's Technical Department at 1-800-334-6541.
Date published: 2017-09-05
how big a hole is need to install thru a bulkhead ?
The manufacturer of the All Stainless Steel Mini Drop-In Single Horn, Low Pitch does not provide a template for the installation. The horn size is 3”L x 3 ¼”W x 1 ¾”H and the grill dimensions are 4 7/8” x 2 3/8” with 4” hole centers.
Date published: 2016-09-25
Is this correct for a 2008 sun dancer 310?
Thanks for your question regarding the Ongaro mini drop-in horn. Unfortunately we do not know the exact horn that came standard with you Sundancer 310 so we can't say for sure if this will be an exact fit. There are two major manufacturers of mini drop in horns and both are very similar in size and use the same number of wiring terminals. The best thing to do is to measure your existing horn and grill and compare to this one to make sure it will fit in the hole and cover the opening. The sizes of this horn are: Horn measures 3"L x 3-1/4"W x 1-3/4"H. Grill measures 4-7/8" x 2-3/8" with 4" on centers mounting holes.
Date published: 2015-10-08
I have a 18-6" boat Tracker Targa with no horn. Do you have a installation instructions, would like to operate off a switch. Looking for wiring and install suggestions
Please contact our technical department at 1.800.334.6541.
Date published: 2015-09-23
WHAT ABOUT THE DUALONGARO HORN, #72614, WILL IT FIT IN THE SAME HOLE AS THE SINGLE?
item 72614 is a total of two horns that are both 3" L x 3-1/4" W x 1-3/4" H. So you will need two holes instead of just one. They are the same size as just the single though.
Date published: 2015-09-23
Im looking for a drop in replacement horn for a 07 larson 180 sport
None of our horns are application specific so you should be able to wire any of them to a power, ground, and momentary switch and they work just fine. So, yes this and any of our other horns should work for you depending on the mounting space available on your boat.
Date published: 2015-09-23
will this horn fit a Rinker 243 Year 2001 deck boat?
They are universal and have no specific models they fit. I am unfamiliar with your boat. 3" L x 3-1/4" W x 1-3/4" H There are the dimensions you can reference.
Date published: 2015-09-23
Do you have any technical illustrations showing the overall dimensions of the horn and measurements of the mounting holes on this?
Stainless Steel Mini Drop-In Single • 12 Volt Lo Pitch Dimensions: 3” L, 3-1/4” W, 1-3/4” H (7.5 x 8 x 4.5 cm) Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8” x 2-3/8” with 4” hole centers. Rating 106 db @ 1 Meter Installed • FF: 410 Hz + 2
Date published: 2015-09-23