Adjustable Bell-Style Pedestal
Item No. 314754
Adjustable Bell-Style Pedestal is rated
out of
5 by
19.
Images
Details
https://www.overtons.com/adjustable-bell-style-pedestal-314754.html
Adjustable Bell-Style Pedestal
$80.74
$89.99
Save $9.25
(
10% Off
)
Additional Information
Features
Strong and durable, this outstanding pedestal supports an 850-lb. load and features an easy-to-tighten handle and reinforced resin swivel with brake. 13"-18" adjustment. Base: 10" dia.; 9" hole pattern. Swivel: 6-1/2" x 7"; 5-1/4" hole pattern.
Show moreShow less
- Supports 850-lb. load
- Easy-to-tighten handle
- Reinforced resin swivel with brake
- 13"-18" adjustment
Specs
| Base Dimensions | 10" diameter; 9" hole pattern, Swivel: 6-1/2" x 7"; 5-1/4" hole pattern. |
|---|---|
| Pedestal Included | Yes |
| Weight Capacity | 850.00 lbs |
| Unit Weight | 5.40 lb |
| Brand | Springfield Marine |
WARNING: This product can expose you to chemicals including Acetaldehyde / 2-Acetylaminofluorene, Bracken fern, which is [are] known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
Strong and durable, this outstanding pedestal supports an 850-lb. load and features an easy-to-tighten handle and reinforced resin swivel with brake. 13"-18" adjustment. Base: 10" dia.; 9" hole pattern. Swivel: 6-1/2" x 7"; 5-1/4" hole pattern.
Show moreShow less
- Supports 850-lb. load
- Easy-to-tighten handle
- Reinforced resin swivel with brake
- 13"-18" adjustment
| Base Dimensions | 10" diameter; 9" hole pattern, Swivel: 6-1/2" x 7"; 5-1/4" hole pattern. |
|---|---|
| Pedestal Included | Yes |
| Weight Capacity | 850.00 lbs |
| Unit Weight | 5.40 lb |
| Brand | Springfield Marine |
WARNING: This product can expose you to chemicals including Acetaldehyde / 2-Acetylaminofluorene, Bracken fern, which is [are] known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Rated 5 out of
5
by
Bill R from
Love It
This replaced a 9 inch fixed height pedestal. The 10 inch base fit the same mounting holes on the floor. My seat has a fore and aft slide adjustment and it fit right on the 2 and 3/8 inch diameter pedestal. Did not need the seat mount. The height adjustment is wonderful. I have it about halfway up. Absolutely love it. This really puts me in the driver's seat.
Date published: 2020-10-17
Rated 5 out of
5
by
Nick from
Solid seat mount.
Bolted down with ease. Sturdy. Adjustment works well.
Date published: 2020-09-27
Rated 5 out of
5
by
joe from
Strong and easy to install
Very easy to install for my application - 6 #14 2" stainless steel lag screws for each. Screw into floor. Done! Strong. Holds a 250+# fat man no problem.
Date published: 2017-06-19
Rated 4 out of
5
by
Bigman from
Great seat pedestal for big and tall individuals!
I recently ordered the bell style pedestal because I'm 6'7" and at 300 lbs I wanted something that I would feel safe and comfortable. Well, after I installed one in my boat I liked it so much I ordered a second one!
There is one slight drawback...It would be great to have the mounting hardware included with the seat. I had to make a special trip to a hardware store to purchase stainless steel screws. In my case, I made two separate trips.
Date published: 2016-06-20
Rated 1 out of
5
by
Natty121 from
The height adjustment is junk
The slide adjustment works well, but you can't change the controls to the port side. My main complaint is that the height adjustment won't stay. I sit on it, and all of a sudden it clicks down to the next setting, and then a little while later, it will click down again. The whole height adjustment is poor.
Date published: 2013-07-29
Rated 5 out of
5
by
Joly from
I would buy this product again.
I used this for the Captian's seat on my 24 ft Party Barge pontoon.
Date published: 2013-06-21
Rated 5 out of
5
by
heavyhand from
great buy
I re do about 3 boats a year. clean, gut and re- upholster. These are a cheap alternative to some pretty expensive options. Work great and as long as you have a stable platform, will serve you well for many years. Check dimensions as you will have to gauge height and placement on some craft.
Date published: 2013-06-15
Rated 5 out of
5
by
Mike from
Solid and Strong at a great price.
This is a very sturdy base that even my wife can't destroy. This base will support large people with ease. I have two complaints, one, no mounting hardware is included. It would be nice to have some shiny stainless hardware included. Two, the low level adjustment could be 1-2 inches lower to accomidate smaller vessels 15-20 feet. With the base set at its lowest position, the pilots head is well over the windshield of a 17 foot boat. Other than the two minor issues the base is rock solid and should outlast the boat.
Date published: 2012-09-07
What type of mounting hardware dose it need bolts or screws?
According to the deck and whether you have access to the back side.
Date published: 2017-08-11
Does this have any height adjustment?
without knowing which pedestal you are referring to, we are not able to answer your question
Date published: 2017-04-10
1. Can I use a Springfield Belle Bucket Seat Pedestal Item # 37002 to replace a Swivl-Eze Pin Pedestal Set? 2. The seat hole pattern is 5.25 inches on center and the seat plate is 6.75 x 6.75 inches. Appreciate your help.
Yes
Date published: 2015-09-23
DOES THE PEDESTAL COME WITH THE MOUNTING BOLTS OR DO YOU NEED TO BUY THEM ALSO, AND IF SO WHAT TYPE DO I NEED ?
No bolts come with this pedestal. The bolts you would need depend on the thickness of the mounting area.
Date published: 2015-09-23
Does this pedestal meet the operator requirements for boats...(15 1/2 foot tri hull)
Class A Passenger Seat mount must resist 30 foot pounds of torque. It is not rated for the driver.
Date published: 2015-09-23
will this work with the wise high back folding seat? I already have 2 of the high back seats in my cart and would like to get 2 adjustable pedestals with them
Yes, this product should work with those seats.
Date published: 2015-09-23