3M Marine Adhesive/Sealant Fast Cure 4000UV, 3-oz. tube
Item No. 315649
3M Marine Adhesive/Sealant Fast Cure 4000UV, 3-oz. tube is rated
out of
5 by
12.
Images
Details
https://www.overtons.com/3m-marine-adhesivesealant-fast-cure-4000uv-3-oz.-tube-315649.html
3M Marine Adhesive/Sealant Fast Cure 4000UV, 3-oz. tube
$14.24
$15.24
Save $1.00
(
7% Off
)
Additional Information
Features
This one-part polyether formula has superior UV resistance and cures to form a firm, rubbery, watertight seal. Remains flexible. Bonds and seals metal, gelcoat, fiberglass, wood, and plastic. Ideal for deck hardware, hatches, portholes, transducers, railings, and navigation lights. Great for visible bond lines. Shipped ground only.
Show moreShow less
- Superior UV resistance
- Forms a firm, rubbery, watertight seal
Specs
| Coverage | 1/8" bead = 120 linear feet |
|---|---|
| Cure Time | 24.00 hr |
| Curing Mechanism | 70 degrees at 50% humidity |
| Dry Film Thickness | 0.13 mm |
| Paint/Finish Type | Polyurethane |
| Unit Weight | 0.34 lb |
| Brand | 3M |
WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
This one-part polyether formula has superior UV resistance and cures to form a firm, rubbery, watertight seal. Remains flexible. Bonds and seals metal, gelcoat, fiberglass, wood, and plastic. Ideal for deck hardware, hatches, portholes, transducers, railings, and navigation lights. Great for visible bond lines. Shipped ground only.
Show moreShow less
- Superior UV resistance
- Forms a firm, rubbery, watertight seal
| Coverage | 1/8" bead = 120 linear feet |
|---|---|
| Cure Time | 24.00 hr |
| Curing Mechanism | 70 degrees at 50% humidity |
| Dry Film Thickness | 0.13 mm |
| Paint/Finish Type | Polyurethane |
| Unit Weight | 0.34 lb |
| Brand | 3M |
WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Rated 5 out of
5
by
SlideSped4000 from
Daily use in our industry.
You see a lot of negative reviews on this product after people don’t follow directions applying it. First off, it’s meant to be flexible, secondly it needs time to cure. If you can figure out how to apply it you can figure out how to read the instructions; clean and prep your surface before applying.
Date published: 2021-05-26
Rated 1 out of
5
by
JCLe from
Waste of money and time.
We restored our Boston Whaler last summer and sealed out the deck plate and removable gas tank cover. Not even a year has passed and it is already cracking. So we started to remove the 4000 and found the top was dry, chalky, and cracked and in some spots it was still sticky and wet.
Date published: 2021-03-24
Rated 1 out of
5
by
MT392 from
This product is terrible.
Dug out all caulk on our boat two years ago and used 4000uv as a replacement, huge mistake. After pulling the boat this year noticed caulk is turning into chalk. Not looking forward to another winter of redoing this because of a sub par product.
Date published: 2020-12-27
Rated 1 out of
5
by
RXRJoe from
Sticky after 28hrs 80 Deg Garage
Sealed a center console to floor really a skim coat at the edge and screw holes. Still sticky and comes off on a finger touch.
Date published: 2020-09-13
Rated 1 out of
5
by
npjr from
Lacks Durability
I am a professional recreatioinal marine tech with over thirty years experience and fully satisfied with multiple 3M products. However, based on product claims, I decided to try 4000uv beginning several years ago. I have discovered that it degrades in volume (wears away) and begins, in sections, to soften to an oily peanut butter consistancy that will wipe loose with a rag. 3M should revisit there testing protocols and remove or improve this product.
Date published: 2020-06-05
Rated 1 out of
5
by
Fireman1500 from
Burst Tube
I previously had good luck with 4200 and 5200 and decided to purchase a large tube of 4000. I am a little disappointed (based on the price of the product) that the tube burst in the gun and the product was wasted.
Date published: 2020-03-08
Rated 5 out of
5
by
REMONE from
excellent product
We have used this stuff to seal in a wet, industrial environment for the last 2 years, Once it is set in place it does not leak or break loose like the silicone based sealers we have used in the past. It is difficult to get apart once set but that is great in my opinion its doing its job well.
Date published: 2019-12-11
Rated 1 out of
5
by
Colwyn from
Stays sticky
Bought 4 tubes fron large US marine store. Have used part of first tube and after two days it is still soft and sticky. Hoping it will cure before becoming contaminated with dirt etc.
Dissapointing to buy a product called 'fast cure' and have this problem.
Date published: 2019-02-21