Shaun Murray and Greg Nelson agree that a solid foundation greatly increases a rider's learning curve. The Hyperlite Baseline Wakeboard is shaped specifically for creating that base and solid foundation. The Baseline has a wider overall profile built atop a continuous rocker, delivering a smooth carving board that gets more pop off the wake due to its increased surface area. The variable edge design is forgiving between the inserts but then sharpens towards the tip and tail to provide the strong edge hold necessary for generating speed into the wake.

The Baseline is simple, and both Murray and Nelson believe that "Less is More" in their shared shaping philosophy. The center of the base is clean, and clean water flow creates a smooth ride and softer landings. The dual tunnels easily allow water to enter and exit at the Baseline's tip and tail.

Continuous Rocker
The rocker line that started it all. Speed and fluid predictable pop truly define this rocker. Designed to carry great speed into the wake with minimal drag, a continuous rocker generates a longer trajectory with similar pop every time.

Monocoque Construction
Integrating the top and bottom fiberglass layers into one, generates a more durable board on side impacts to prevent delamination.

Layered Glass
With layered glass every Hyperlite deck will have the same pop off the double up year after year.

Biolite 3 Core
This core material is the gold standard in the industry and used throughout the Hyperlite line. Biolite 3 is the lightest and most durable formula to date.

Variable Edge Design
Edge shapes that differ from tip to tail, most commonly shifting to sharper edges near tip and tail from a more forgiving, rounded or beveled shape under stance.

Dual Fin Positioning
Fins closer to the tail provide more edge hold, and the forward fin position delivers a looser feel.

M6 Inserts
Delivers a more secure fit of the bolts to the inserts, improving bolt retention, keeping binding hardware locked down.

Minimum Swing Weight Profile
Thinning of the tip/tail profile for an effortless feel while spinning flat and during inverts.


SPECS
Baseline 131
Length: 51.6"
Rocker Size: 2.2"
Waist Width: 16.75"
Tip Width: 11.1"
Stance Range: 21.5"-25.5"
Rider Weight: up to 175 lbs.

Baseline 136
Length: 53.5"
Rocker Size: 2.35"
Waist Width: 17"
Tip Width: 11.25"
Stance Range: 22.5"-26.5"
Rider Weight: 140 lbs. and up

Baseline 141
Length: 55.5"
Rocker Size: 2.5"
Waist Width: 17.2"
Tip Width: 11.4"
Stance Range: 23.5"-26.5"
Rider Weight: 160 lbs. and up

Men's Team Open-Toe Bindings
The Hyperlite Team OT Binding was built for the rider looking for the feel and functionality of a very supportive binding with adjustability and the ability to share. The slightly higher cuff and seamless liner construction allow for additional support with a comfortable fit. The adjustable open-toe design makes it a great choice to accommodate a wide array of foot sizes. Dual quick-cinch lace zones allow for easy entry and exit at the beginning or end of your set. The Team OT Binding also utilizes the new Low Pro Plate System for a lighter weight feel and the closest foot-to-board connection possible.