Overtons Watersports® > Launching Life on the Water Since 1976®

Your Overtons.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out
Pre-Thanksgiving Sale Up to 20% off Use code THANK20

Enter or verify that code THANKS20 is in your cart at checkout, and a 10% discount will be applied to your order over $100, a 15% discount will be applied to your order over $200, or a 20% discount will be applied to your order over $300. Your savings will be based on the merchandise total only, excluding shipping, handling, additional freight, and taxes. This offer can not be combined with any other offer. Other restrictions and exclusions may apply. Offer expires at 11:59pm ET on 11/22/14. Click here for full offer details >

Boating & Marine > Propellers > Thrust Washers & Hardware >

Boating & Marine>Propellers>Thrust Washers & Hardware>

Your propeller is a vital link between your boat and the water. Optimize your boat's performance with a propeller from Michigan Wheel, Stiletto, Solas, Quicksilver, or Comprop. When replacing the prop, consider replacing thrust washers, aft washers, and prop nuts. Our selection of prop wrenches and prop tools make changing your propeller easier.

Sort By:

Items Per Page: 

Results 1 - 20 of 87  Page 1 of 5 arrow-r-blue

Quicksilver Trim Tab Anode, AP 4004

Quicksilver Trim Tab Anode, AP 4004

Key Features
  • For use with Alpha 1, Mercury, Mariner, and Force

$15.99
Prop Nut Kit - Mercury/Mariner; Mercruiser I, Alpha I, and Bravo I, II, TR/TRS

Prop Nut Kit - Mercury/Mariner; Mercruiser I, Alpha I, and Bravo ...

Key Features
  • For use with Mercury/Mariner (65 hp and up)

  • For use with Mercruiser, Mercruiser I, Alpha I

  • For use with Bravo I, II, TR/TRS, SSM Stern Drives

  • For use with Honda: V4, V6

  • For use with Chrysler/Force: 90L, 120, and more

$10.99
Thrust Washer - Mercury/Mariner; Mercruiser I, Alpha I, and Bravo I, II

Thrust Washer - Mercury/Mariner; Mercruiser I, Alpha I, and Bravo...

Key Features
  • For use with Mercury/Mariner (65 hp and up)

  • For use with Mercruiser, Mercruiser I, Alpha I

  • For use with Bravo I, II, TR/TRS, SSM Stern Drives

  • For use with Honda: V4, V6

  • For use with Chrysler/Force: 90L, 120, and more

$24.99
McGard Single Propeller Lock, 3/4" x 16 thread

McGard Single Propeller Lock, 3/4" x 16 thread

Key Features
  • Free-spinning collar

  • Prevents tools from loosening the prop

  • Protects from theft

  • Does not hinder prop operation

$59.99
Prop Nut Kit, for use with Yamaha outboards 70 and 90hp '84 and later

Prop Nut Kit, for use with Yamaha outboards 70 and 90hp '84 and ...

Key Features
  • Protects your drive system

  • Replacement thrust washer

  • Replacement prop nut

$34.99
Quicksilver Flo-TorQ IV Modular Prop Hub Kit, 835257Q10

New! Quicksilver Flo-TorQ IV Modular Prop Hub Kit, 835257Q10

Key Features
  • Change props faster, with less expense

  • Delrin cushioned sleeve

  • Breaks away under impact to protect lower end unit

  • Hub kit only

  • Prop Housing sold separately

$119.99
Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835257Q 1

New! Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835257Q 1

Key Features
  • Change props faster, with less expense

  • Delrin cushioned sleeve

  • Breaks away under impact to protect lower end unit

  • Hub kit only

  • Prop Housing sold separately

$59.99
Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835258Q 1

New! Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835258Q 1

Key Features
  • Change props faster, with less expense

  • Delrin cushioned sleeve

  • Breaks away under impact to protect lower end unit

  • Hub kit only

  • Prop Housing sold separately

$84.99
Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835258Q 2

New! Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835258Q 2

Key Features
  • Change props faster, with less expense

  • Delrin cushioned sleeve

  • Breaks away under impact to protect lower end unit

  • Hub kit only

  • Prop Housing sold separately

$84.99
Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835274Q 1

New! Quicksilver Flo-TorQ II Modular Prop Hub Kit, 835274Q 1

Key Features
  • Change props faster, with less expense

  • Delrin cushioned sleeve

  • Breaks away under impact to protect lower end unit

  • Hub kit only

  • Prop Housing sold separately

$54.99
Quicksilver Flo-TorQ II Modular Prop Hub Kit, 840389Q06

New! Quicksilver Flo-TorQ II Modular Prop Hub Kit, 840389Q06

Key Features
  • Change props faster, with less expense

  • Delrin cushioned sleeve

  • Breaks away under impact to protect lower end unit

  • Hub kit only

  • Prop Housing sold separately

$109.99
Prop Nut Kit - Evinrude/Johnson V6, V4, V8; OMC Stern Drives and Seadrive

Prop Nut Kit - Evinrude/Johnson V6, V4, V8; OMC Stern Drives and ...

Key Features
  • For use with Evinrude/Johnson: V-6;

  • 85 120, 140 V-4; V-8 85 or later;

  • OMC Stern Drives: V-6 and small block V-8;

  • Seadrives: 2.5 and 2.6 Liter

$22.99
Prop Nut Kit, for use with All Yamaha V-6 and V-4 outboards

Prop Nut Kit, for use with All Yamaha V-6 and V-4 outboards

Key Features
  • Protects your drive system

  • Replacement thrust washer

  • Replacement prop nut

$34.99
McGard Single Propeller Lock, 18 x 1.5 thread

McGard Single Propeller Lock, 18 x 1.5 thread

Key Features
  • Designed with a free spinning collar

  • Prevents tools from loosening the prop

  • Protect from theft during use and in storage

$59.99
Inboard Prop Nut Kit, fits 1" and 1-1/8" shafts

Inboard Prop Nut Kit, fits 1" and 1-1/8" shafts

Key Features
  • Fits 1" and 1-1/8" shafts

  • For Cupped Dyna-Jet Propellers

$17.99
Thrust Washer - Evinrude/Johnson V6, V4, V8; OMC Stern Drives and Seadrive

Thrust Washer - Evinrude/Johnson V6, V4, V8; OMC Stern Drives and...

Key Features
  • For use with Evinrude/Johnson: V-6;

  • 85 120, 140 V-4; V-8 85 or later;

  • OMC Stern Drives: V-6 and small block V-8;

  • Seadrives: 2.5 and 2.6 Liter

$34.99
Sierra Prop Nut Kit, Sierra Part #18-3733

Sierra Prop Nut Kit, Sierra Part #18-3733

Key Features
  • Sierra Part #18-3733

  • Prop nut kit

$14.99
McGard Single Stern Drive Lock

McGard Single Stern Drive Lock

Key Features
  • Made of naval brass and hardened stainless steel

  • Free-spinning collar turns w/o loosening the lock

  • 7/16" thread

$24.99
Thrust Washer - Mercury/Mariner 3 cylinder, Inline 4 cylinder

Thrust Washer - Mercury/Mariner 3 cylinder, Inline 4 cylinder

Key Features
  • For use with Mercury/Mariner:

  • 3 cylinder 70, 75, 80, 85, and 90 hp;

  • Inline 4 cylinder 100 and 115 hp

$14.99

Sort By:

Items Per Page: 

Results 1 - 20 of 87  Page 1 of 5 arrow-r-blue