West System 206-A Slow Hardener, .44 pint
Item No. 315967
Images
Details
https://www.overtons.com/west-system-206-a-slow-hardener-.44-pint-315967.html
West System 206-A Slow Hardener, .44 pint
$24.99
$26.99
Save $2.00
(
7% Off
)
Additional Information
Features
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
Pot life at 72°F (22°C): 20 to 25 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 1 to 4 days
Minimum recommended temperature: 60°F (16°C)
Show moreShow less
Pot life at 72°F (22°C): 20 to 25 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 1 to 4 days
Minimum recommended temperature: 60°F (16°C)
- Low-viscosity epoxy curing agent
- Combine with 105 Resin at 5:1 ratio
- .44 pint
Specs
| Application Temperature | 60.00 °F |
|---|---|
| Components | .44 Pint Hardener |
| Cure Time | 4.00 hr |
| Curing Mechanism | 60º F |
| Unit Weight | 0.60 lb |
| Brand | West System |
WARNING: This product can expose you to chemicals including CHEMICALS-C, which is [are] known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
Pot life at 72°F (22°C): 20 to 25 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 1 to 4 days
Minimum recommended temperature: 60°F (16°C)
Show moreShow less
Pot life at 72°F (22°C): 20 to 25 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 1 to 4 days
Minimum recommended temperature: 60°F (16°C)
- Low-viscosity epoxy curing agent
- Combine with 105 Resin at 5:1 ratio
- .44 pint
| Application Temperature | 60.00 °F |
|---|---|
| Components | .44 Pint Hardener |
| Cure Time | 4.00 hr |
| Curing Mechanism | 60º F |
| Unit Weight | 0.60 lb |
| Brand | West System |
WARNING: This product can expose you to chemicals including CHEMICALS-C, which is [are] known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov/product.