Smith Stainless Steel Flush-Mount Rod Holder
Item No. 314795
Smith Stainless Steel Flush-Mount Rod Holder is rated
out of
5 by
2.
Details
https://www.overtons.com/smith-stainless-steel-flush-mount-rod-holder-314795.html
Smith Stainless Steel Flush-Mount Rod Holder
$33.24
$34.99
Save $1.75
(
5% Off
)
Additional Information
Features
The Smith 30° Rod Holder is perfect for freshwater or light-duty saltwater rods. This rod holder is made of mirror-polished 304 stainless steel. Features a UV-resistant, black PVC cap and liner.
• 30° angled tube
• 2" outside diameter tube (2-1/4" at the gimbal pin)
• 9" deep tube
• 1-9/16" inside diameter
• 3-3/8"W x 4-1/2"L mounting flange
• 1/4" 304 stainless steel gimbal pin
• Mounts with 3/16" screws (not included)
Show moreShow less
• 30° angled tube
• 2" outside diameter tube (2-1/4" at the gimbal pin)
• 9" deep tube
• 1-9/16" inside diameter
• 3-3/8"W x 4-1/2"L mounting flange
• 1/4" 304 stainless steel gimbal pin
• Mounts with 3/16" screws (not included)
- Perfect for fresh or light-duty saltwater rods
- Mirror-polished 304 stainless steel
- UV resistant, black PVC cap and liner
- 30° angle
- 9" deep tube w/ 1-9/16" inside diameter
Specs
Unit Weight | 1.20 lb |
---|---|
Brand | Smith |
Reviews
Q & A
The Smith 30° Rod Holder is perfect for freshwater or light-duty saltwater rods. This rod holder is made of mirror-polished 304 stainless steel. Features a UV-resistant, black PVC cap and liner.
• 30° angled tube
• 2" outside diameter tube (2-1/4" at the gimbal pin)
• 9" deep tube
• 1-9/16" inside diameter
• 3-3/8"W x 4-1/2"L mounting flange
• 1/4" 304 stainless steel gimbal pin
• Mounts with 3/16" screws (not included)
Show moreShow less
• 30° angled tube
• 2" outside diameter tube (2-1/4" at the gimbal pin)
• 9" deep tube
• 1-9/16" inside diameter
• 3-3/8"W x 4-1/2"L mounting flange
• 1/4" 304 stainless steel gimbal pin
• Mounts with 3/16" screws (not included)
- Perfect for fresh or light-duty saltwater rods
- Mirror-polished 304 stainless steel
- UV resistant, black PVC cap and liner
- 30° angle
- 9" deep tube w/ 1-9/16" inside diameter
Unit Weight | 1.20 lb |
---|---|
Brand | Smith |
Rated 5 out of
5
by
dmax2 from
Top Quality
Perfect fit to replace cheap plastic mount previous owner installed. Do it right from the start. Nice looking it will be used with pride.
Date published: 2012-10-17
Rated 5 out of
5
by
Jess from
Better than expected
Purchased two to install in my Ranger Bass boat. I had some reservations about the depth, however, easy to overcome. Installed both flush with the deck in less than an hour. They look awesome and work great
Date published: 2011-11-07
What are the mounting hole spacings.
That’s sorta tricky as so many dimensions are interdependent for the measurements to be useful That said Viewed from above. The left and right holes are 2-1/4” on center The center hole is 2-7/16” on center, above the centerline dividing the 2 lower holes The cap is 3-3/8” wide x 4-3/8” long I hope this is helpful.
Date published: 2015-10-07
Are these straight or angled?
The rod holder is angled at 30 degrees
Date published: 2015-09-23