Sequoia Table Leg System 25.5" Pedestal Only
Item No. 315658
Sequoia Table Leg System 25.5" Pedestal Only is rated
out of
5 by
6.
Details
https://www.overtons.com/sequoia-table-leg-system-25.5-pedestal-only-315658.html
Sequoia Table Leg System 25.5" Pedestal Only
$28.49
$29.99
Compare at $34.99
Save $1.50
(
5% Off
)
Additional Information
Features
This unique table pedestal is strong, attractive, and one of the most stable systems available. A 3-blade twist-lock mechanism locks the anodized aluminum leg to the floor base for an extra-sure, stable attachment. 25-1/2" x 2" dia. Pedestal only. Does not include base or table mount.
Show moreShow less
- 3-blade twist-lock mechanism
- Extra-sure, stable attachment
- Anodized aluminum
- 25.5"L x 2" dia.
Specs
Construction | Anodized aluminum |
---|---|
Post | 25.5 inches |
Unit Weight | 1.50 lb |
Brand | ITC |
Reviews
Q & A
This unique table pedestal is strong, attractive, and one of the most stable systems available. A 3-blade twist-lock mechanism locks the anodized aluminum leg to the floor base for an extra-sure, stable attachment. 25-1/2" x 2" dia. Pedestal only. Does not include base or table mount.
Show moreShow less
- 3-blade twist-lock mechanism
- Extra-sure, stable attachment
- Anodized aluminum
- 25.5"L x 2" dia.
Construction | Anodized aluminum |
---|---|
Post | 25.5 inches |
Unit Weight | 1.50 lb |
Brand | ITC |
Rated 1 out of
5
by
RICH from
POOR DO NOT BUY !!!
POST SLOWLY TURNS ITSELF AND TABLE THEN FALLS OVER AS YOUR CRUISING AROUND EVEN AT ANY SPEEDS,,,,This came standard on my 2017 sun tracker pontoon
Date published: 2018-08-22
Rated 5 out of
5
by
Big Jim from
replaced original exactly - great!!
exact replacement for original
Date published: 2012-09-10
Rated 5 out of
5
by
Woody from
Great Product
Nice looking on my pontoon. I like the way it snaps into the table mount making the table more secure. Also I like the way it mounts into the floor, it doesn't stick the way my original table pedistal does.
Date published: 2010-06-30
Rated 5 out of
5
by
Jonny Crownline from
JUST WHAT THE DOCTOR ORDERED!!
THIS SEQUOIA TABLE LEG DOES JUST WHAT IT IS SUPPOSED TO. EASY TO INSTALL IN FLOOR MOUNT, HOLDS TABLE AT PERFECT HEIGHT AND LETS THE TABLE SWIVEL ON THE TOP SECTION FOR EASE OF MOVEMENT AROUND TABLE WHEN INSTALLED.
Date published: 2009-07-13
Rated 5 out of
5
by
John from
Great product!
I used it to replace a surface mounted floor socket in a motor home (no clearence underneath for a recessed socket). The new low profile, surface mounted, twist lock socket along with a new table socket to accept the new pole was easily installed and eliminated the original unsightly, obtrusive socket.
Date published: 2008-12-10
Rated 3 out of
5
by
Jerry from
Outstanding product except plastic base
Great system but inidividual in boat went to stand up and put some side pressure on the pedestal and the lower plastic stabilizing ring cracked.
Date published: 2008-07-10
Is this interchangeable with a Sun Tracker table leg? I am new to pontoon boats and just bought a 2008 Sun Tracker that is missing the table leg.
This leg is designed for the Sequoia series.
Date published: 2017-09-20
It looks the same, but do you know if the leg would fit to Sun Tracker's pedestal base? We have Sun Tracker 2015 but lost the original steel leg for the removable table.
I apologize but I do not have a way to cross reference that.
Date published: 2017-07-19
I have a 2005 Tahoe Sierra GE will the pedestal leg fit, meaning are they pretty much universal.
Does your base look like item # 76714? If not then this pedestal will not work for your boat.
http://www.overtons.com/modperl/product/details.cgi?pdesc=Sequoia-7-Diameter-Stainless-Steel-Floor-Base-Only&i=76714
Date published: 2017-09-01
I have 5 inch base and not the 7 inch. Will the twist on locking mechanism still fit both sizes?
Yes. The opening to accept the locking mechanism is the same size on all Sequoia bases.
Date published: 2015-10-29
Can the black cap on the pole be removed to fit into a table top that accepts a 2" pole? it sounds like the cap being tapered will not fit into a table top with 2" diameter
WITH THE BLACK CAP ON, IT FIT PERFECT INTO OUR NEW TODD TABLE. WITH A LITTLE NUDGE, YOU COULD SWING THE TABLE FOR MOVEMENT AROUND THE CABIN. I AM NOT SURE WHAT DIA. THE TABLE MOUNT IS, BUT IT WAS THE STANDARD MOUNT THAT COMES ON ALL THE TABLES.
Date published: 2015-09-23
What is the diameter of the round leg ??? What size "hole" will it fit into on the table top side? I have a WEIS Tabel Table top that takes 2" pole.
The pedestal is 2" diameter but the plastic cap that slides into your table mount is tapered, 2 1/8" to 2 1/4".
Date published: 2015-09-23
what size table mount will this fit into?? 2"? or 2 1/4" only?
Nick - There is a black cap on the top of the pedestal that is tapered for a tight fit into the table mount. The diameter of this taper is 2 1/8" to 2 1/4".
Date published: 2015-09-23