Rule 27SA 1100 GPH Automatic 12V Bilge Pump

ITEM: 321780

Rule 27SA 1100 GPH Automatic 12V Bilge Pump

ITEM: 321780

In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

  • Automatic, fully submersible bilge pump

  • Anti-airlock protection

  • Rust and corrosion resistant

  • Designed for use on small boats

  • 1100 gph open flow

The Rule 27SA 1100 GPH automatic, fully submersible 12V DC bilge pump provides outstanding quality and value. Automatic pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle. Pump is designed with a small hole underneath the strainer tab that acts as an air vent to prevent air-locking. Protected against rust and corrosion, the pump is constructed with a stainless steel shaft, nylon impeller, and marine-grade blocked wiring. It is economically priced and designed for small boats. Compact bilge pump features silent and vibration-less operation, efficient long life motor, and ignition protection. Will not burn out after running dry. NMMA, IMCI, CE certified. 4-1/4"H x 2-3/8"W x 2-3/8"D.

• Model 27SA
• Open Flow: 1100 gph
• Amp Draw: 3.3
• Fuse: 6 amps
• Discharge Opening: 1-1/8"
• Wire Length: 29"
• Maximum Temperature: 200°F
• Typical Life: 1,500 hours

Model 27SA
Open Flow Capacity 1100 GPH
Automatic Yes
Amp Draw 3.3 Amps
Hose Size 1-1/8"
Voltage 12V DC
Dimensions 4-1/4"H x 2-3/8" dia.