The hottest product to hit wakesurfing is the convenient, uniquely designed Wakesurf Shaper. To improves previous models, Ronix added a concave through the center with a more defined leading edge, and this more effectively diverts a column of water to improve fuel efficiency. This wake-shaping device easily mounts to the lower/back point of the starboard or port side of your boat hull to create a premier surf wake on either side. The Ronix wakeshaper is a true game changer for surfers and can be used on waterski boats, crossover boats, and V-Drives. In addition to turning wakes into swells, the device also eliminates the need to weight your boat unevenly. Gone are the days of filling and draining your bags on the port or starboard side – now you keep it all in the center. With a built-in handle, the wakeshaper is easy to move and is best paired with a loaded Eight.3 ballast system. For use on boats with a 19-1/2" boat surface length and 26" water surface length. Measures 12-1/2"H x 9"D. Wakesurf shaper comes complete with 2 adjustable shims, 4 adhesive fastener strips, instructional USB, and an owner's manual.
The shim is a simple attachment between the Wakesurf Shaper and a boat's hull. It's not required on boats with a flat hull, but a step hull will require a 1" shim. Other boats have a more pronounced step and need a 2" shim, while in some cases you might need both shims to make a 3" gap between the hull and your Wakesurf Shaper. For installation, Ronix recommends the Wakesurf Shaper is 80% submerged when your boat is properly weighted and positioned as close to the stern as your hull will allow.
Wakesurf Shaper Placement:
The adhesive fastener strips that attach to the boat are intentionally 6" longer than the Wakesurf shaper. This allows you to position the Wakesurf Shaper according to your desired wake shape. If it's positioned closer to the stern, the wake becomes steeper and deeper. If it's closer toward the bow, the wake gets a longer sweet spot.