Raymarine EV-400 Sail Evolution Autopilot

ITEM: 330830

Raymarine EV-400 Sail Evolution Autopilot

ITEM: 330830

Ships within 5 - 6 business days

Please make sure all selections are complete and a valid quantity is entered and try again.
  • Additional discounts do not apply.

    • Complete autopilot in a box

    • No calibration required

    • SeaTalkng Network compatible

    • Intelligent EV sensor core

    • A complete autopilot in a box
    • Heavy-duty, 30-amp output for Type 3 Drives or ZF Sail Pod Drive Systems
    • No calibration required
    • SeaTalkng Network Compatible
    • ACU-400 auxiliary power to SeaTalkng network

    • EV-1 Sensor Core
    • p70R Autopilot Control Head
    • ACU-400 Actuator Control Unit (Includes the M81105 Rotary Rudder Reference)
    • Evolution Cabling Kit
    • EV Unit O-Ring Pack (set of 2)
    • Wall Mounting Bracket

    The EV Sensor Core
    At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks. The rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.

    • Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
    • Simple SeaTalkng connectivity to the control head and ACU
    • Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
    • Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays

    p70 Autopilot Control Head
    The p70 is a push-button operation controller designed primarily for sailboats.

    • LightHouse user interface is simple and quick to use
    • Wide 160° viewing angles
    • Start up wizard helps you configure the pilot quickly and easily
    • Anti-reflective coating for improved visibility in bright sunlight
    • Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
    • Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
    • Simple system and group dimming/illumination
    • Support for multiple data sources
    • SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)

    ACU-400 Autopilot Control Unit (ACU)
    The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus.

    Evolution Cabling Kit
    • 1 x SeaTalkng Power Cable (0.4m)
    • 1 x SeaTalkng Backbone Cable (5m)
    • 1 x SeaTalkng Spur Cable (0.4m)
    • 1 x SeaTalkng 5-way Connector Block
    • 2 x SeaTalkng T-piece Connector
    • 2 x SeaTalkng Terminator