Details
https://www.overtons.com/johnson-pump-ultima-automatic-bilge-pump-314574.html
Johnson Pump Ultima Automatic Bilge Pump
Johnson Pump Ultima Automatic Bilge Pump is rated
out of
5 by
4.
Item No. 314574
$56.99
$59.99
Additional Information
Johnson Pump Ultima Automatic Pump offers the latest in automatic bilge pump technology. Integration of the patented Ultima "field effect" sensing technology into the bilge pump body creates a sleek, compact, reliable bilge pump that's ready to install and run for years of unerring service. Pump has no exposed sensors, which eliminates corrosion possibilities. This 600 GPH pump has easy-to-install DuraPort discharge ports to eliminate stress cracking caused by overtightened hose clamps. Comes with both a straight and 90° smooth elbow port. Open Flow: 600 GPH. Amp Draw: 2.5. Hose Size: 3/4". 12V DC. Pump measures 6"L x 3.2"W x 4.1"H.
Show moreShow less
Dimensions | 6"L x 3.2"W x 4.1"H | Unit Weight | 1.30 lb |
---|
Johnson Pump Ultima Automatic Bilge Pump is rated
out of
5 by
4.
Rated 2 out of
5
by
Dick from
Easily clogs
I purchased this pump with an automatic float switch for use in an open boat in order to minimize the accumulation of rain water. The pump and control seem to work OK. The pump body is very light weight, so after attaching the discharge hose the pump needed to be secured in an upright position somehow. However, in testing the system, the small accumulation of tree droppings mixed in the water almost immediately clogged the inlet slits. Consequently, if left in automatic mode, the pump would run dry and discharge the battery. A redesign to better handle trash and a heavier housing would improve the performance.
Date published: 2015-07-13
Rated 5 out of
5
by
Thomas from
Keepiing the boat a-float
Working grate in my 14' Jon boat. I especially like the fact that there is no separate float control
Date published: 2015-05-20
Rated 5 out of
5
by
Reeldoc from
A great product for the price,
Every boat should have this type of pump
Date published: 2015-04-24
Rated 5 out of
5
by
Hot Rod from
Great Pump
I use it as a back-up for my sump pump
Date published: 2009-01-27
How do i install it? Can it be used to replace another brand of pump?
Yes. The Johnson Ultima Pump can replace an existing bilge pump. I am attaching a link so that you can read the installation instructions. http://www.spx.com/en/johnson-pump-marine/pd-marine-bilge-ultimabilge/.
Date published: 2017-09-18
how many inches of water in the bilge before the pump activates???
Per Johnson, this automatically comes on when water enters the bilge and shuts off when it is dry.
Date published: 2018-02-25