detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
Get answers from real customers and in-house experts with AnswerBox.
Q:How does this product attach to the deck?Asked on 8/13/2015 by lHWC from Chambersburg, PA
A:Thanks for your question. The cooler based has mounting flanges on each side so you can bolt or screw the seat to the floor of the boat. Here is an image that shows the pre-drilled holes in the mounting flange.
http://cdn.overtons.com/product/035/35882_L2.JPG?interpolation=lanczos-none&downsize=450px:*Answered on 8/14/2015 by Product Expert from Overtons
Q:I would like to purchase a seat & back. I don't know the size wise cooler I have and it's not local.
Is the seat and back rest the same on both the 50 and 70 qt. cooler?Asked on 2/13/2015 by Chuck from Gloucester city NJ
A:Here is the information provided by the manufacturer. The 70 quart cooler is 3" wider than the 50. Hope this helps but please email us back or call us at 1-800-334-6541 if you need additional information. Thanks
70 Quart Swingback Cooler Seat
w/ Aluminum Arms
Overall Height: 34.75" Width: 32" Depth: 18"
Height to Top of Seat: 19"
Seat Cushion: 3" Thick, 32" Width, 18" Depth
Mounting Bracket Included
50 Quart Swingback Cooler Seat
w/ Aluminum Arms
Overall Height: 34.75" Width: 29" Depth: 18"
Height to Top of Seat: 19"
Seat Cushion: 3" Thick, 29" Width, 18" Depth
Mounting Bracket IncludedAnswered on 2/14/2015 by Product Expert from Overtons
Q:What are the dimensions at the base? I have a 32" opening between two brackets. Will it fit?Asked on 10/15/2014 by Stanley from United States
A:Overall footprint is 33" x 14.5". The slotted bolt holes start at 32".
37" from edge to edge putting the "holes for aluminum brackets" @ 34".
The 50 Qt is going to be about 3” smaller for an overall footprint of 29” x 14.5. However, the widest section of the base will still be about 34”.Answered on 10/17/2014 by Anonymous
Q:How does the cooler drainAsked on 9/21/2014 by Bill from Chapin, SC
A:There's a bottom plug open lid pull plug.Answered on 9/29/2014 by markq from Elsinboro, N.J.
A:This cooler does not have a built in drain--you will need to place the drain where you need it via a drill. For more information on how this is installed--please call our technical services department.Answered on 10/6/2014 by Anonymous
Q:Do you have risers to put under the base to lift it up so the seat is higher for a center console boat?Asked on 6/20/2014 by JKropp from Willits, CA
A:Thank you for your question.
At this time the product you are requesting does not exist. You could possibly create your own risers out of a material such as King Starboard. Keep in mind you will need to upgrade your hardware to match the new height added by the riser.Answered on 6/23/2014 by Anonymous
Q:WHAT IS THE HEIGHT OF THE SEAT,FROM BASE TO TOP OF THE SEAT CUSHION?Asked on 10/5/2013 by BobW from Englewood, Fl
A:The height from the base to the top of the seat cushion is 20".Answered on 10/8/2013 by Product Expert from Overton's
Q:Do you have more information on the dimensions for this unit?Asked on 8/16/2009 by Anonymous
A:If you need more information about this or any other seat we would prefer that you call and talk to us about what you are looking for. From the information in you question we are not sure what additional information you are looking for. If you have similar questions please call our technical department at 1-888-683-7866. thanksAnswered on 9/17/2009 by JUSTIN from OVERTONS TECHNICIAN
Q:I have one of these seat coolers on my boat. Is it possible to buy the back cushion pole and mounting hardware seperatly. Mine is missing the backrest.Asked on 7/30/2009 by Mike from Bradenton Florida
A:Possibly. Requests for parts of items that we sell always have to go through our special orders department. To find out if this is available you will need to call our technical department so that they can send a request to the special orders department to see if we can get it from wise company and what the price would have to be. Please allow 24-48 hours for special orders to respond to requests excluding weekends and holidays. call 1-888-683-7866Answered on 10/2/2009 by JUSTIN from OVERTON'S TECHNICIAN
Q:do you have a cover to fit this seat?Asked on 6/14/2009 by steve from NJ
A:You can get a cover in white vinyl (item 71920) or 6oz polyester (item 71928)Answered on 6/16/2009 by Ryan from Overtons
Q:DO YOU HAVE A LIFT KITAsked on 6/8/2009 by JOHN from GOLDSBORO
Please be more specific. I'm not sure what you are referring to in regards to a lift kit for the seat with cooler.Answered on 6/9/2009 by Ryan from Overtons