Enter or verify that code SUMMER50 is in your cart at checkout, and a $15 discount will be applied to your order over $100, and a $50 discount will be applied to your order over $250. Your savings will be based on the merchandise total only, excluding shipping, handling, additional freight, and taxes. This offer can not be combined with any other offer. Other restrictions and exclusions may apply. Offer expires at 11:59pm ET on 8/23/14. Click here for full details >
You May Also Likeback to top
detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:I have 1985 SeaRay Seville with MerCruise 140hp i/o with Morse shift control Will this control work and control both trim and tilt.
Thanks DaveAsked on 7/21/2014 by Dave from Marietta, Ga
Yes. The UFlex Control should replace your existing control box and work fine.
SteveAnswered on 7/22/2014 by Anonymous
Q:I have a 1984 Century 2000 with a mercruise 228 HP IO. The throttle control is a Quicksilver Commander Panel Trim mount PN827270A43.
Do you have a replacement for this?Asked on 6/13/2014 by greg
The current Quicksilver control is no longer available. This Uflex control will work as a replacement with your application.
SteveAnswered on 6/16/2014 by Anonymous
Q:I have a 1981 ELPT 115 HP inline 6 outboard motor with a "Commander side mount control" box page 4B-3 in mercury control service manual 90-814705R03.
Will this mount with mercury fittings work for my application?Asked on 9/5/2013 by fowllanguage from Moscow, ID
Q:Does this work for mercruiser i/o engines?Asked on 6/12/2012 by ant from newport, ri
Q:Will this work on a 1995 wellcraft 21ft Volvo Penta and how do you put it in neutral to use the throttle only
thank youAsked on 5/15/2012 by Anonymous
Q:I have a 1995 Rinker Captiva 190. Will this product require differnt cables and does the trim tab raise outdrive to trailer trim height.
Thank YouAsked on 5/6/2012 by Anonymous
A:All of our control levers work with teleflex control cables and original equipment control cables. If your cables are original or teleflex brand you will be good to go. If they are not you will need to purchase the proper length teleflex control cables from us and possibly a connection kit for the motor.Answered on 10/1/2012 by Justin from Overton's
Q:I have a 1994 Crownline 182BR with a 5.0 L Volvo Penta. Will this work in my boat? Also would I need to get different cables?Asked on 4/12/2011 by Jeff from Nolensville, TN
A:This lever works with original equipment and teleflex cables. As long as you have teleflex brand cables or the original factory installed cables this lever will replace your existing lever.Answered on 6/8/2011 by Justin from Overtons
Q:I purchased a used 2001 Suzuki DF-115 4 stroke. I need a new throttle, cable, ignition, and trim setup. The engine came with nothing and my mercury throttle controls are no good. Please advise on a setup. Thanks.Asked on 11/13/2009 by Matt from Irvine, CA
A:Well I know for sure that you can not use this throttle lever because you have a Suzuki and this is for mercruiser. You should call our technical department for assistance because we need to ask you some questions that would need to be answered before we recommend parts for your engine. If you have similar questions as to what is compatible with your engine we really would rather you call 1-888-683-7866 because this is not a big enough platform for extensive assistance, which could be what this requires. Please call our technical staff at the number above for more information.Answered on 11/23/2009 by Overton's from Technician
Q:I have a 1985 Concord Mach II with a Mercruiser 260 I/O. My current lever is a QuickSilver, will this replace the current lever without any major modifications?Asked on 11/9/2009 by Marty from Ball Ground, GA
A:This will replace any lever connected to a mercruiser engine that is using the original equipment cables. Just meaning that your control cables are the original cables that were installed by the factory that made the boat or have been replaced with the same cables that were originally on the boat. As long as you fit those two guidelines there should not be any modification that you have to do.Answered on 12/23/2009 by Justin from Overton's Technician
Q:I need to replace the controller on a 87 ?? 3.7 ltr. mercruiser 4cyl in a 22 ft. searay Will this work without modification ??Asked on 10/17/2009 by Fred from Costa Rica
A:Yes, they are pretty universal controls. This should work fine for you.Answered on 10/19/2009 by Bryant C from Tech Department