Overtons Watersports® > Launching Life on the Water Since 1976®

Your Overtons.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out
Up To 20% Off Your Order! Promo Code FUN20
view-larger ROLL ON TO ZOOM IN

Tie Down 10" Trailer Disc Brake Kit

Item # 713782
Customer Rating:

Key Features

  • Complete kit for adding brakes to your trailer

  • Includes 6,600-lb. trailer disc brake actuator

  • Two disc brakes with ceramic pads

  • Back-up solenoid

  • Single axle brake line kit


Our Price   $579.99

Availability: In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

details & specs

back to top
Product Description
tie_down_engineering The Tie Down Trailer 10" Disc Brake Kit comes complete with everything you need to add brakes to your trailer. Includes 6,600-lb. disc brake actuator; back-up solenoid; two Galv-X coated, vented-rotor disc brakes with ceramic pads; and a single axle brake line kit. Designed for trailers with 13", 14", or 15" wheels.

Tie Down 6,600-lb. Disc Brake Actuator
• All aluminum master cylinder
• Warns operator when brake fluid is low
• Oversized master cylinder provides higher pressures
• Drop-N-Go auto latch with 2" coupler accommodates 2" hitch ball
• Fits trailer frames up to 3" wide

Tie Down Eliminator 10" Disc Brake
• Vented rotor with Galv-X finish
• Ceramic brake pads
• 380 aluminum caliper with E-coat finish
• Raised ribs dissipates heat up to 5 times faster
• 5 studs, 4-1/2" on center
• Fits 1-3/8" x 1-1/16" tapered spindle

Brake Line Hose Kit
• Two 24" brake lines with two fittings
?
Specifications
Description 10" Disc Brake Kit
Selected Product Price   qty back to top
&&

Tie Down 10" Trailer Disc Brake Kit

Item # 713782

  $579.99

Availability:
In Stock

Accessories Price qty
&&

Side-Mount Spare Trailer Tire Carrier

Item #80579
more details
$24.99

Availability:
In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

videos

back to top

Tie Down 10 Trailer Disc Brake Kit     Tie Down 10 Trailer Disc Brake Kit     Tie Down 10 Trailer Disc Brake Kit     
Loading...
Loading...
Loading...

product reviews

back to top

REVIEW SNAPSHOT®

by PowerReviews
 
4.8

(based on 8 reviews)

Ratings Distribution

  • 5 Stars

     

    (6)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (6)

Cons

No Cons

Best Uses

No Best Uses
    • Was this a gift?:
    • No (4)
    • Reviewer Profile:
    • Casual driver (3)

Reviewed by 8 customers

Sort by

Displaying reviews 1-5

Back to top

Previous | Next »

 
5.0

I would recommend this to anyone

By Don

from White Marsh, Md.

About Me Casual/ Recreational

Verified Buyer

Pros

  • Easy to install

Cons

    Best Uses

    • Trailering

    very easy to install

    • Was this a gift?:
    • No
     
    5.0

    Tie Down 10

    By Ole Man

    from Baton Rouge, La.

    About Me Casual/ Recreational

    Verified Buyer

    Pros

    • Easy to install
    • Easy To Use
    • Shipment Was Rapid
    • Your Staff Provided Excel

    Cons

      Best Uses

        Your staff provided excellent service and the shipment was made and received as promised. Call were handled in a friendly and professional manner.

        • Was this a gift?:
        • No
         
        5.0

        Great product, everything included

        By Keith

        from Clearwater florida

        About Me Advanced

        Verified Buyer

        Pros

          Cons

            Best Uses

              Everything included,easy to follow instructions

              • Was this a gift?:
              • No
               
              5.0

              Very Good

              By Ray

              from Toney, Al

              About Me Casual Driver

              Verified Buyer

              Pros

              • Decreased Stopping Distance
              • Easy To Install

              Cons

                Best Uses

                • Replacement
                • Restoration

                Needs to identify that a 5 pin connector for the tow vehicle and the trailer, readily available, is needed because of the fact the brake solenoid for backing up uses the back up light of the vehicle. Should be offered as additional accessory to the kit.

                 
                5.0

                best investment money can buy /safety!

                By the fisherman

                from zephyrhills fl

                About Me Auto Enthusiast, Truck Enthusiast

                Verified Buyer

                Pros

                • Decreased Stopping Distance
                • Easy To Install
                • Lightweight
                • No Fade
                • Time Will Tell For Lastin

                Cons

                  Best Uses

                    great product. far better than original equipment.time will tell how product holds up to the salt water elements

                    Displaying reviews 1-5

                    Back to top

                    Previous | Next »

                    q & a

                    back to top

                    Do you have questions about this product? 4 easy ways to get the answers you need:

                    • Live Help - Real time help for basic questions. click here
                    • Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.
                    • Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.
                    • Answer Box - Get answers from real customers by clicking "Ask a Question" below.

                    Get answers from real customers and in-house experts with AnswerBox.

                    7 Questions | 7 Answers
                    Displaying questions 1-7
                    • Q:

                      I am wanting to install brakes on a trailer that has not had brakes previously. On a tandem axle should the brakes be mounted on the front or rear axle? Should additional brakes be placed on the other axle? The parts listing shows two 24 inch brake lines. Are other brake lines that would run from the actuator to a "T" and crossover brake lines included? If not could these be purchased locally or made up by the installer?
                      Asked on 10/6/2014 by Tom from Norman,OK

                      1 answer

                      • Staff Reviewer

                        A:

                        Hello Tom,

                        Most trailers in the US only have brakes on the front axle. However, depending on the sizes of the trailer and state regulations, some trailers require all axles to have brakes. It's always best to check your state laws.

                        All brake lines needed are included for a single axle installation. If you decides to add brakes on the rear axle, you will need an add on kit (Overton's item # 74058). We also offer brake line kits for single axle and double axles trailers (Overton's item # 74057 and 74059).

                        You will need to make sure the axles have brake flanges already installed (most do). If not, then you will need to have someone weld them on.

                        Thank you,
                        Steve

                        Answered on 10/6/2014 by Anonymous
                    • Q:

                      Are trailer spindles universal for bearings. Is there a possibility that the hubs will not install on my trailer spindle?
                      Asked on 10/5/2014 by Tom from Norman, OK

                      1 answer

                      • Staff Reviewer

                        A:

                        Hello Tom,

                        The Tie Down 10" Trailer Disc Brake Kit will fit a 1-3/8" x 1-1/16" tapered spindle.

                        Thank you,
                        Steve

                        Answered on 10/6/2014 by Anonymous
                    • Q:

                      Will it fit on a torsion axle?
                      Asked on 8/13/2014 by Terry from Bremerton

                      1 answer

                    • Q:

                      Are the wheel bearings included in the rotor kit?
                      Asked on 5/7/2014 by john from ky lake

                      1 answer

                      • Staff Reviewer

                        A:

                        Hello John,

                        Yes. They are fully assembled and contain bearings, seal and are pre greased.

                        Thank you,
                        Steve

                        Answered on 5/7/2014 by Anonymous
                    • Q:

                      Where are they manufactured.What is the warranty?
                      Asked on 4/14/2014 by Ken from San Diego

                      1 answer

                      • Staff Reviewer

                        A:

                        Hello Ken,

                        The Trailer Disc Brake Kit is made here in the USA. The warranty for the kit is 1 Year.

                        Thank you,
                        Steve

                        Answered on 4/15/2014 by Anonymous
                    • Q:

                      Will this unit work with 13" wheels?
                      Asked on 2/13/2014 by carney from Brunswick,ohio

                      1 answer

                      • Staff Reviewer

                        A:

                        Hello Carney,

                        Yes. This item does work with just about any size tire.

                        Thank you,
                        Steve

                        Answered on 2/17/2014 by Anonymous
                    • Q:

                      I have a Pontoon trailer, single axle, with 15 inch wheels. Which size brake rotors do I need, 10 or 12" for a 21 Ft. fishing barge and 75 horse mercury motor.
                      Asked on 1/5/2014 by Harv from LeRoy, NY

                      1 answer

                      • Staff Reviewer

                        A:

                        The capacities below and the number of lugs on the current hub are used as a guide.

                        10” Disc Brake Hub- (Hub Capacity- 1,875 lbs. each), (Axle Capacity-3,750 lbs.), Lugs-5

                        12” Disc Brake Hub- (Hub Capacity- 3,000 lbs. each), (Axle Capacity- 6,000 lbs.), Lugs-6

                        Answered on 1/9/2014 by Product Expert from Overton's
                    Displaying questions 1-7

                    Do you have a question about this product?