ROLL ON TO ZOOM IN

VIEW LARGER

Suction Cup Tie-Downs

Item # 90280

Customer Rating:

Key Features

Secure boat covers, tarps, ropes, equipment
Holding power: up to 60 lbs.
4 tie-downs per pack

Our Price $12.99

Low Price Guarantee

Availability: In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

Quantity

details

Product Description

Great for securing boat covers, tarps, ropes, and equipment, these suction-cup tie-downs provide an exceptional holding power of up to 60 lbs. These unique tie-downs consist of a 6" strap with shock cord loop, ball, and an extra large 3-1/4" suction cup. 4 tie-downs per pack.

product reviews

REVIEW SNAPSHOT®

by PowerReviews

Kwik TekSuction Cup Tie-Downs

4.4

(based on 35 reviews)

89%

of respondents would recommend this to a friend.

Pros

Easy to use (29)
Easy to install (24)
Well built / quality (20)
Attractive (13)

Cons

Best Uses

Small boats (22)
Large boats (15)
Personal watercraft (8)
Pontoon boats (7)

- Reviewer Profile:
- Casual/ recreational (17), Recreational (9), Advanced (8)
- Was this a gift?:
- No (18)

Most Liked Positive Review

Jet logic tie- Downs

The product did exactly what it said it would and held down our winter cover the entire winter. We had Overton replace them because the bungie part gave out (not Overtons fault) [...] we are using them again this winter. I can't begin to tell you how great this product is. You should have seen our boat full of ropes,to hold down the cover before we found and tried these. I would definately recomend this product. We have a 29" open bow Sea Ray. and the winter cover weighs a ton and these do their job perfect. Thank you again Overton for the PERFECT product.

Most Liked Negative Review

Good in certain applications

Good idea and easy to install. Boat must be clean and dry when using these. I tried towing the boat using these and the wind against the cover made them pop off. They don't...Read complete review

Good idea and easy to install. Boat must be clean and dry when using these. I tried towing the boat using these and the wind against the cover made them pop off. They don't work well if the boat is in the water and I tried to make them nice and tight, but most of the time they slide up the side of the boat. Not bad if your just looking to keep a cover on but don't care how tight it is.

Reviewed by 35 customers

Sort by

Displaying reviews 1-5

Previous | Next »

1/1/2013

5.0

I've been looking all over for these

By KBH

from West Palm Beach, FL

About Me Advanced

Pros

Attractive Design
Easy To Install
Easy To Use
Quality Construction

Cons

Best Uses

Large Boats
Personal Watercraft
Pontoon Boats
Sailing
Small Boats

Comments about Kwik Tek Suction Cup Tie-Downs:

My boat cover had old ones and these were perfect replacements.

7/11/2012

4.0

good idea

By power house

from Coatsville ,Indiana

About Me Casual/ Recreational

Pros

Easy To Install

Cons

Best Uses

Small Boats

Comments about Kwik Tek Suction Cup Tie-Downs:

had trouble keeping cover on until I tried these suction cups.
My neighbor tells me it working perfectly since I not there at the moment.

7/3/2012

2.0

Cups did not adhere well

By rimbo

from cincy

About Me Casual/ Recreational

Pros

Cons

Difficult To Use

Best Uses

Comments about Kwik Tek Suction Cup Tie-Downs:

Cups did not adhere well and pulled off

7/3/2012

5.0

Great to have on Boat !!

By KJ

from Tennessee

About Me Casual/ Recreational

Pros

Cons

Best Uses

Personal Watercraft
Small Boats

Comments about Kwik Tek Suction Cup Tie-Downs:

Perfect to have on-board for multiple uses.

6/8/2012

5.0

Money saver!

By Glwoll

from Russell, KY

About Me Casual/ Recreational

Pros

Affordable
Attractive Design
Easy To Install
Easy To Use
Quality Construction

Cons

Best Uses

Small Boats

Comments about Kwik Tek Suction Cup Tie-Downs:

We use these suction cup clips to secure the trailering cover while the boat is in the slip. Otherwise we can't use the straps that wrap around the frame of the trailer, and the cinch rope in the cover can't be made tight enough.

These suction cups give the cover tension and help it stay on in all kinds of weather. Using these clips made it possible to use the trailering cover instead of buying some other kind of cover or having a snap cover installed.

You do have to be careful where you try to stick them, they have trouble holding on over surfaces of different levels, such as the graphic stickers on the side of the boat. If part of it is on the sticker and part is not, then it won't hold.

Displaying reviews 1-5

Previous | Next »

q & a

Do you have questions about this product? 4 easy ways to get the answers you need:

• Live Help - Real time help for basic questions. click here

• Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.

• Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.

• Answer Box - Get answers from real customers by clicking "Ask a Question" below.

get answers from real customers and in-house experts with AnswerBox.

6 Questions | 10 Answers

Displaying questions 1-6

Q:
I intend to use this product on my PWC to hold light equipment while in use. Will the Suction cups hold in a wet environment while operating on the water ?
Asked on 8/6/2012 by Dusty from St. Pete Beach, Fl.
Know the answer? Answer this question
0 answers
Q:
If the boat is kept in a marina how easy are they going to be to install and put the cover in place when the boat is still in the water?
Asked on 5/16/2011 by Anonymous from Bismarck, ND
Know the answer? Answer this question
2 answers
- VERIFIED BUYER
  
  A:
  If you only have access to one side of the boat, you have to stay inside the boat to stick them onto the side of the boat you can't reach from the dock. In our Bayliner open bow, you can stand on the aft of the boat and roll up the canopy toward the front, reaching down the sides to release the suction cups. Then when you put the cover back on, start from the front with the rolled up canopy. Set it across the bow, reach over and affix the suction cups and then unroll the cover, sticking suction cups as you unroll the canopy toward the stern..
  We have a 18.5 foot open bow Bayliner, this may be more difficult on a larger boat or a cuddy cabin.
  Answered on 6/8/2012 by Glwoll from Russell, KY
- VERIFIED BUYER
  
  A:
  For me the suction cups are easy to install on a pontoon both on the dock side and the water side. What is difficult is hooking the cover to the suction cups on the water side. I use my kayak and go around in the water to attach my cover with bungee cords to the suction cups. Otherwise, I have to be on the boat with the cover over my head which can be done on a pontoon since the sides are open but it's a pain to do. I would think with any other boat (speed boat)you would need to have some way to get in the water (canoe/kayak)to secure your cover properly. I hope this helps.
  Answered on 8/16/2011 by SS from Chautuaqua Lake NY
Q:
Will the suction cause the paint any damage?
Asked on 9/13/2010 by babypuppy from Virginia
Know the answer? Answer this question
2 answers
- A:
  No they will not
  Answered on 10/20/2010 by Chris from Tech
- VERIFIED BUYER
  
  A:
  No damage to our boat
  Answered on 6/13/2011 by Billiam Z from Massillon, OH
Q:
How do these attach to the cover?
Asked on 8/6/2009 by T from KS
Know the answer? Answer this question
3 answers
- CUSTOMER CARE
  
  A:
  You run them through the existing loops made for cover tie downs.
  Answered on 9/22/2009 by Bryant C from Tech Department
- A:
  best method is to wet first then install
  Answered on 7/8/2010 by Dr J from south east florida
- A:
  They come with a bungee like cord that you hook to. I would not recommend these for travel since the bungee cord would stretch in the wind. They are ideal for a boat cover to prevent weather while be stationary either docked or on your trailer.
  Answered on 8/16/2011 by SS from Chautauqua Lake, NY
Q:
how well do they hold traveling on the highway
Asked on 6/21/2009 by gordo545 from IA
Know the answer? Answer this question
2 answers
- A:
  SUCTION CUPS STICK BETTER WHEN AREA IS CLEAN AND/OR WAXED. ENSURE COVER IS TIGHT AS DRIVING DOWN THE ROAD LESS (COVER) MOVEMENT, SUCTION CUPS STAY IN PLACE.
  Answered on 6/15/2010 by THE BREAKERS from OSHTEMO MICHIGAN
- VERIFIED BUYER
  
  A:
  THE TIE DOWNS WORK FINE,JUST ENSURE BOAT COVER IS TIGHT TO PREVENT MOVEMENT WHILE DOING THE SPEED LIMIT. WORK GREAT FOR ME.
  Answered on 6/15/2010 by THE BREAKERS from KALAMAZOO MICHIGAN
Q:
does this work on aluminum boats as well?
Asked on 5/22/2009 by Teri from Grand Rapids, MN
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Thank you for your inquiry. This product works on any flat surface. As long as your boat maintains a flat surface there should be no problem with the performance of the product.
  Answered on 5/26/2009 by Donald from Overtons