Overtons Watersports® > Launching Life on the Water Since 1976®

Your Overtons.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out
view-larger ROLL ON TO ZOOM IN

Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand

Item # 31444
Customer Rating:

Key Features

  • Durable 15-5 ph one piece stainless steel casting

  • High-rake, progressive pitch configuration

  • Bestoverall performance at all throttle levels


Our Price   $349.99

Availability: In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

details

back to top
Product Description
stiletto The unique high-rake, progressive pitch configuration is designed to help most boats achieve their best overall performance at all throttle levels; low end, mid-range and top end. Manufactured using a durable 15-5 ph one piece stainless steel casting, then polished to a gleaming mirror-like finish. They are backed by a limited lifetime blade failure warranty. Your prop is one of the essential links between your boat and the water.Carefully choose the prop that will best suit your application.Mercury/Mariner/Force O/B All V-6 O/B's except Mariner Magnum II, and Mercury XR-4 series.Mercruiser Sterndrive:All Mercruiser I, Alpha I, and Bravo I sterndrives. For the props above with the first digits of "ST103 and ST104" use Quicksilver #13171 thrust washer (Overton's part #24220).Important: These recommendations are for single engine installations only. For most twin engine installations, it is necessary to increase the pitch by 4".Warning:Due to the performance enhancing nature of the design, Quicksilver Trim Tab #. 46399A1or AP 4004 (Overton's part #38459)MUST be used to avoid damage and/or injury.Exception:w/Mariner Magnum II and Mercury XR-4 O/B's, use Quicksilver Anode Plate #15300 or equivalent.Note:1997 and newer Mercury/Mariner O/B with 150hp plus or any Mercruiser I/O will need an aft washer (Overton's part #23395) for proper installation.
Selected Product Price   qty back to top
Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand

Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand

Item # 31444

  $349.99

Availability:
In Stock

Accessories Price qty
Overton's Prop Wrench

Overton's Prop Wrench

Item #80545
more details
$12.99

Availability:
In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

product reviews

back to top

REVIEW SNAPSHOT®

by PowerReviews
Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand
 
4.7

(based on 6 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

83%

of respondents would recommend this to a friend.

Pros

  • Easy to use (4)
  • Visually pleasing (4)
  • Weather proof (3)

Cons

    Best Uses

        • Was this a gift?:
        • No (3)

      Reviewed by 6 customers

      Sort by

      Displaying reviews 1-5

      Back to top

      Previous | Next »

      (0 of 1 customers found this review helpful)

       
      5.0

      nothing

      By jafo the boat man

      from lake elmo mn

      About Me Beginner

      Verified Buyer

      Pros

      • Easy to Use
      • Protects Well
      • Visually Pleasing
      • Weather Proof

      Cons

        Best Uses

        • Engine

        Comments about Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand:

        good looks

        • Was this a gift?:
        • No

        (1 of 1 customers found this review helpful)

         
        5.0

        Nice comprimise for the Sea Ray 175

        By G Mac

        from Perth Western Australia

        About Me Beginner

        Verified Buyer

        Pros

        • Easy to Use
        • Visually Pleasing

        Cons

          Best Uses

            Comments about Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand:

            Advice in forums where bang on , stiletto have the best prop for the 175 .The improvements are very noticable , pity i did'nt purchase the aft washer when i ordered , had some grief from local prop specialist about buying cheap American "brown stuff" from the internet and refused to sell washer , he even offered to spin it on the lathe to show how "brown stuff" it was ( Just Propellers Perth WA ). Another local Prop specialist helped me out . The prop self centered and runs like a dream , the boat seems a lot lighter to control and planes faster . . . The brand name should be engraved on prop , the stickers half off after first trip .

            • Was this a gift?:
            • No

            (0 of 1 customers found this review helpful)

             
            5.0

            Stiletto™ Performance Propeller

            By Rainer

            from Dime Box, Texas

            About Me Casual/ Recreational

            Verified Buyer

            Pros

            • Easy to Use
            • Protects Well
            • Visually Pleasing
            • Weather Proof

            Cons

              Best Uses

              • Engine
              • Outdoor

              Comments about Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand:

              [...]

               
              5.0

              The best isnt always the most expensive

              By backstop44

              from Bellingham Washington

              About Me Competitive

              Verified Buyer

              Pros

              • Easy to Use
              • Performance
              • Visually Pleasing
              • Weather Proof

              Cons

                Best Uses

                • Its a propeller

                Comments about Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand:

                Don't forget to have your spare prop ready even when you are not!!

                (1 of 1 customers found this review helpful)

                 
                5.0

                Awsome Product

                By Gator Hunter

                from Moncks Corner, SC

                About Me Recreational

                Verified Buyer

                Pros

                • Good Performance
                • Quiet

                Cons

                  Best Uses

                  • Large Boats

                  Comments about Stiletto 3-Blade Propeller, Pressed Rubber Hub / Stainless Steel, 14.25 dia x 19 pitch, Right Hand:

                  Product was placed on 4 cylinder Mercruiser on 25' pontoon boat. It's installation eliminated vibration caused by previous prop, as well as increasing top end and making for a better hole shot.
                  ps. Make sure you replace the stock trim tab also. It will not fit without the change.

                  Displaying reviews 1-5

                  Back to top

                  Previous | Next »

                  q & a

                  back to top