detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:i have a 36ft pontoon house boat I want to dry dock, the pontoons are 30 inches in diameter,it is very important the contour of blocks fit the contour of the pontoons to minimize damage, I read your post that says one size fits all, but this is a uncommonly large toon and this is a very heavy boat, I realize I will need a block on each weld but contour is still inportant, can you guys confirm this for me , I will need about eight blocks, boat weighs approximately ten thousand pounds.Asked on 12/29/2014 by Project guy from Southern,Illinois
A:Thank you for your question.
Please call our technical services department for further discussion of your needs.Answered on 12/29/2014 by Anonymous
Q:do the four caddies have a full bottom or are they stackable one into the other?Asked on 10/1/2014 by jr from wyoming mn
A:The bottom is open and these are stackableAnswered on 10/2/2014 by Product Expert from Overtons
Q:How many caddies would we need for a 22' pontoon boat?Asked on 10/22/2013 by Terri from Stoughton, WI
A:You would just need to order 1 set of the 4 pack shown here. These handle up to 4,000 lbs which should be more than sufficient for a 22' pontoon even with a 4-stroke engine. If you are unsure about the total weight of your boat and motor package you can easily research it online.Answered on 10/23/2013 by Product Expert from Overton's
Q:Are these 4 foot by 4 foot?Asked on 6/3/2012 by Anonymous from oxford Al.
A:They are 17" x 17" at the bottom and 13" x 13" at the topAnswered on 10/1/2012 by Justin from Overton's
Q:how do you get the toon off the trailer and onto theseAsked on 9/21/2009 by leemacz from tulsa ok
A:You would have to have something like a fork lift. Or a heavy duty lift that could come and pick the pontoon boat up and lay it on the Pontoon CaddiesAnswered on 10/12/2009 by Chad @ Overton's from Greenville, NC
A:Place the "caddy's" under the pontoons,check for center,lower the trailer (sissor trailer)If I had a bunk trailer I would jack up the trailer to get the weight off the wheels and store the pontoon on the trailer!Answered on 12/4/2009 by Dick from Eagle River,Wi
A:Jack the trailer up with the toon still on it then lower back on them but I do not have a bunker style trailer.Answered on 6/15/2010 by Moneypit Owner from Morristown, Ohio
Q:can these caddys be mounted to the trailer?Asked on 6/20/2009 by gator from seffner fl
A:NoAnswered on 6/22/2009 by Michael from Overtons
Q:are there different ones for different sizes of pontoons? Also how high do they stand?Asked on 5/26/2009 by Anonymous
A:They are made so one size fits all. They stand 10" tall but your toons will be about 9" off the ground since they are recessed slightly. They also have a "V" notch where they cradle your toons in case you have a keel protector welded to the bottom of your toons.Answered on 5/27/2009 by Michael from Overtons