detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:If applying to plywood in a 72 degree environment, roughly how long to allow to tack up before applying carpeting.Asked on 4/2/2014 by The Doctor from Wilmington, IL
A:Thank you for your question.
No tack time needed – the average do-it-yourself person most likely may wait to long to allow it to tack (like you would with contact cement) Since this adhesive is water-based, you can simply apply carpet to the wet adhesive, smooth out any wrinkles, and let it cure in a dry environment for 24-48 hours (check edge to make sure completely cured before exposing to the elements).
I hope this is helpful.Answered on 4/17/2014 by Anonymous
Q:will this product adhere to BB Plyform plywoodAsked on 9/21/2010 by wease from Thomasville NC
A:It is only meant to be applied to marine grade plywood, not pressure treated plywood, because with pressure treated, the copper salts will leach out and disolve the adhesive and the rubber carpet backing.Answered on 9/24/2010 by Bryant from Tech
Q:would it not adhere to pressure treated plywood?Asked on 8/19/2009 by eck from scottsburg in
A:No it does not. The chemicals in the treated plywood don't allow for a good bond.Answered on 9/9/2009 by toby from overtons tech. dept.
Q:will this adhere to plastic plywood?Asked on 8/10/2009 by Anonymous
A:The adhesive is water based, but unfortunately, there are so many different types of plastic, it is very hard to determine if it would work. If you would like to call in to our tech department at 1-888-683-7866, we would be happy to discuss this.Answered on 9/28/2009 by Bryant C from Tech Department
Q:HOW DO YOU PUT IT DOWN?Asked on 6/10/2009 by Dot from Addison, Vermont
A:This is usually applied with a trowel which we sell separate (item 35973)Answered on 6/11/2009 by Ryan from Overtons
Q:does this product adhere to aluminium decksAsked on 6/1/2009 by hillbilly 85 from las vegas nv
A:Use on marine-grade plywood, fiberglass, or aluminum.Answered on 6/3/2009 by Ryan from Overtons