Overton's Deluxe Boat Seat Package
Two back-to-back lounge seats and two jump seats
High-impact plastic frames
High-density foam for outstanding comfort
26-oz. marine-grade vinyl w/UV inhibitors
detailsback to top
Overton's Deluxe Boat Seat Package
Outfit your boat with a complete set of Deluxe Boat Seats and enjoy beautiful styling as well as outstanding savings. The Deluxe Boat Seat Package includes
• Two Back-to-Back Lounge Seats (#72067) -- Base: 36"L x 13.25"W x 10"H. Seat 45.5"L x 18"W x 28.25"H. Fully reclined: 65"L.
• Two Jump Seats (#72069) -- Base: 13.25"L x 14"W x 10"H. Seat: 12.5"D x 15.5"W x 27.25"H.
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
Get answers from real customers and in-house experts with AnswerBox.
Q:Will these seats fit our 17', 1990 Four Winns Horizon ?Asked on 4/27/2015 by Rob from Wolfeboro, NH
A:Thanks for your question. These are universal seats designed to fit most boats that do not have built-in seat bases. You will need to measure the space available in your 1990 Four Winns to ensure these will fit your specific application. The lounge seats should not be an issue and a boat this size should have adequate space for the lounge seats. For the jump seats, assuming you have an inboard / outboard motor, you will need to measure the space on each side of the engine compartment cover to ensure the space is large enough and these seats will fill the space enough to suit your needs. If you do not need the rear jump seats you can just order the lounge seats, item 72067. If you need further assistance please email us back or call one of our product techs at 1-800-334-6541 and they will assist you.Answered on 4/27/2015 by Product Expert from Overtons
Q:how does it attach to the floor? My present base is 14" high. I need to build a 4" base to attach the front seats to due to the size of the boat and depth of the sides. A 10" base on it's own is too low. My boat is an original Crestliner by AMF. 40 yrs old this year.Asked on 5/21/2014 by none from Oscar, La
A:Thank you for your question. The following assembly instructions will help you see how the base of the seat has cross members that can be screwed into the floor or your boat, or the sub base in your case.
http://www.overtons.com/assets/prodman/72067ovt.pdfAnswered on 5/21/2014 by Product Expert from Overtons
Q:If I buy the back to back/jump seat package, can I also buy extra vinyl for other parts on my boat at a later time? If so,what is the width of the vinyl and what is the price?Asked on 2/28/2014 by Ken from Cincinnati, Ohio
A:Yes. Matching vinyl is available for these seats and the item number is 72519. The vinyl is sold the the running yard and the roll is 54" wide. For example if you order a quantity of 3 you will get a roll that is 54" wide by 9 feet long.
http://www.overtons.com/modperl/product/details.cgi?pdesc=Wise-Standard/Deluxe-Boat-Seat-Matching-Vinyl&i=72519Answered on 3/3/2014 by Product Expert from Overtons
Q:I have 2 questions about ordering the complete seat package please.
1- I'm thinking to line the inside of the base with marine plywood for stability. Your recomendation?
2- How can we find the shipping costs prior to an order?Asked on 8/27/2012 by denham48 from Modesto, CA
A:Plywood is not necessary and will eventually rot after getting wet or damp. You can find out shipping by filling out an order on our website and it will tell you before you enter your card number.Answered on 12/6/2012 by Justin M. from Overton's
Q:Is it possible to get a bench seat instead of two jump seats?Asked on 6/1/2012 by Ft from Lubbock, TX
Q:is the frame wood ?Asked on 7/15/2009 by Anonymous
A:No, the bases are a high-impact, molded plastic frameAnswered on 7/20/2009 by Ryan from Overtons
A:No, the frames are made of hard plastic. Much better than wood frames.Answered on 7/29/2009 by ALF from Avondale, Colorado
Q:Would be using these seats for an 18' 1968 Starcraft Holiday. The transom deck is 25.75" high above the floor so these jumps would exceed that in height. Does the vinyl fabric extend over the the top and down the back of the seat enough (2" min.)? Also on the stern port side this boat has an original steel gas tank, the dimensions of which are 16"w, 18"d, 12"h, and the bow end of which projects 14" minimum from the transom interior drop fascia, so I want to make sure your jumps will allow for this tank. I also need to know the width of the jump seats to see if I'd have to rebuild the I/O engine enclosure.
Holiday68Asked on 7/9/2009 by Holiday 68 from Beverly, MA
A:The dims for the jump seat are as follows:
27.25" H x 15.5" W x 17.25" D
Seat Depth: 13"
Base: 10" H x 14" W x 13.25" D
The seats are completely vinyl wrapped, so you would have to worry about the back of the seat not being covered.Answered on 7/13/2009 by Ryan from Overtons
Q:do the lounge seat fold down?Asked on 7/6/2009 by Anonymous from north branch, mn
A:Yes, the lounge seats fold out and have underneath storage.Answered on 7/10/2009 by Ryan from Overtons
Q:need complete replacement seating and sides of a 1994 playcraft boat can I get replacement seats for the front of the boat also I like the deluxe package of 6 seats but need the front also.Asked on 6/30/2009 by peggy from wakefield, ks
A:This seat package is for 4 seats total (2 jump seats and 2 lounge seats) Since these are not direct replacements for a certain boat model, you will need to measure the allotted space you have for the seats and match up to the specs we have listed.Answered on 7/6/2009 by Ryan from Overtons
Q:Do the Jump Seats come off of the base or not so you can put the battery under the seat?Asked on 6/3/2009 by Anonymous
A:YesAnswered on 6/5/2009 by Michael from Overtons