Overtons Watersports® > Launching Life on the Water Since 1976®

Your Overtons.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out
Anniversary Deals! New Deals Every Day This Week!

Oil Drain Kit - 1/2" x 20 Thread Size

Item # 26163
Customer Rating:

Key Features

  • Oil and fuel-resistant SAE J1527, USCG Type B1 hos

  • Brass end fittings and copper sealing washers

  • Each drain kit measures 42" in length

  • Designed for permanent installation


Our Price  $34.99
Sale Price  $27.99

Availability: In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

details

back to top
Product Description
mpi_products Change oil quickly and easily. This oil drain kit is made of oil and fuel resistant SAE J1527, USCG Type B1 hose with brass end fittings and copper sealing washers. Each drain kit measures 42" in length. Designed for permanent installation. For use with GM, Ford, Mercruiser, and OMC engines.

(If engine is '96 or newer, order item # 30334)

product reviews

back to top

REVIEW SNAPSHOT®

by PowerReviews
MPI ProductsOil Drain Kit - 1/2" x 20 Thread Size
 
4.0

(based on 22 reviews)

Ratings Distribution

  • 5 Stars

     

    (11)

  • 4 Stars

     

    (6)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (2)

77%

of respondents would recommend this to a friend.

Pros

  • Easy to use (15)
  • Visually pleasing (4)
  • Weather proof (4)
  • Protects well (3)

Cons

No Cons

Best Uses

  • Engine (11)
    • Reviewer Profile:
    • Advanced (8), Casual/ recreational (7), Recreational (3)
    • Was this a gift?:
    • No (11)

Most Liked Positive Review

 

Excellent product, I would buy it again!

I bought this product to drain the oil from my 402 big block chevy engine in my classic jet boat, since clearance in the bilge is limited. The hose is long enough to clear...Read complete review

I bought this product to drain the oil from my 402 big block chevy engine in my classic jet boat, since clearance in the bilge is limited. The hose is long enough to clear the transom bilge drain, but not so long that it gets in the way inside my bilge area. I tested this drain hose, before installing the new motor into my boat. Absolutely no leaks! I have purchased many products from Overton's, and I have never had any regrets. This is an excellent product and purchase, that I would recommend to anyone that wanted to drain the oil from an inboard engine without making a mess inside the bilge.

VS

Most Liked Negative Review

 

Drain kit installation

Design Flaws but, may work for your application. My boat's oil pan was very close to the bottom of the hull making it very difficult to screw in the fitting to the pan. ...Read complete review

Design Flaws but, may work for your application. My boat's oil pan was very close to the bottom of the hull making it very difficult to screw in the fitting to the pan. When I did get this done the hose was supposed to thread into the 1st fitting. But, it was pointing in the wrong direction which caused the hose not to reach the through hull drain fitting location. You may also have problems getting a wrench on the hose to tighten it due to either hull or oil pan proximity. I returned it.

Reviewed by 22 customers

Sort by

Displaying reviews 1-5

Back to top

Previous | Next »

 
5.0

Everything worked great and fit well

By Ross

from Kaukauna, WI

About Me Advanced

Verified Buyer

Pros

    Cons

      Best Uses

        Comments about MPI Products Oil Drain Kit - 1/2" x 20 Thread Size:

        Great product

        • Was this a gift?:
        • No
         
        5.0

        I would buy this product again.

        By Gerry

        from Canada

        About Me Professional

        Verified Buyer

        Pros

        • Easy to Use
        • Visually Pleasing

        Cons

          Best Uses

          • Engine

          Comments about MPI Products Oil Drain Kit - 1/2" x 20 Thread Size:

          Very good.

           
          5.0

          Works perfect

          By Clipper skipper

          from Aitkin,MN.

          About Me Advanced

          Verified Buyer

          Pros

          • Easy to Use

          Cons

            Best Uses

              Comments about MPI Products Oil Drain Kit - 1/2" x 20 Thread Size:

              This drain hose works perfect. Makes changing oil easy.

              • Was this a gift?:
              • No
               
              5.0

              Great fit for 1983 351w in Mastercraft

              By Tim79mc

              from Albany, ny

              About Me Advanced

              Verified Buyer

              Pros

              • Easy to Use
              • Leak-free

              Cons

                Best Uses

                  Comments about MPI Products Oil Drain Kit - 1/2" x 20 Thread Size:

                  I had my engine out if the boat when I replaced this, so it was an easy job. Fitting lined up well when tightened and works well. Hard to find part easy to get at Overtons.

                   
                  5.0

                  Well Made, Quality Product, Good Value

                  By Ron

                  from West Point, MS

                  About Me Casual/ Recreational

                  Verified Buyer

                  Pros

                    Cons

                      Best Uses

                      • Engine

                      Comments about MPI Products Oil Drain Kit - 1/2" x 20 Thread Size:

                      This is used on a 5.7 Mercruiser to drain the oil pan. Installed today. The fittings were quality items and the hose was of sufficient length and flexibility to allow numerous outlet options.

                      • Was this a gift?:
                      • No

                      Displaying reviews 1-5

                      Back to top

                      Previous | Next »

                      q & a

                      back to top

                      Do you have questions about this product? 4 easy ways to get the answers you need:

                      • Live Help - Real time help for basic questions. click here
                      • Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.
                      • Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.
                      • Answer Box - Get answers from real customers by clicking "Ask a Question" below.

                      Get answers from real customers and in-house experts with AnswerBox.

                      5 Questions | 6 Answers
                      Displaying questions 1-5
                      • Q:

                        Hi I have a 1996 Mercruser V8 454
                        will this fit on my oil pan?
                        thanks
                        Asked on 12/14/2009 by Ottomatic from chino Ca

                        1 answer

                        • CUSTOMER CARE

                          A:

                          Yes, if your engine is indeed a 1996, this item should work fine for you.

                          Answered on 12/17/2009 by Bryant from Tech
                      • Q:

                        Is that half inch the maximum diameter of the brass cap end?
                        Hard to believe that with a wrench hex (flats) and with the crimped fitting as well that the diameter is only one half inch.
                        Asked on 10/6/2009 by Bodacious4u from Great White North

                        1 answer

                        • CUSTOMER CARE

                          A:

                          No, the thread is 1/2 inch in diameter x 20.

                          Answered on 10/9/2009 by Bryant C from Tech Department
                      • Q:

                        What is the diameter of the hose end (Brass) so I can measure my drain hole before ordering. Thank you.
                        Asked on 9/16/2009 by Portagedreams from Port Clinton, Ohio

                        2 answers

                        • CUSTOMER CARE

                          A:

                          1/2 inch.

                          Answered on 9/18/2009 by Bryant C from Tech Department
                        • A:

                          Be advised that 1/2" is the diameter of the threaded connection, NOT the diameter of the brass coupling that you would want to run through your bilge drain hole to drain the oil while on a trailer. The actual diameter of the crimped brass is over 3/4". I'm returning mine for this reason - can't fit the oil drain hose though my 3/4" drain plug in the stern.

                          Answered on 10/5/2011 by TEC from Maple Grove, MN
                      • Q:

                        What is the method for opening the far end when draining the oil?
                        Asked on 8/26/2009 by daviddwood from Grass Valley, CA

                        1 answer

                        • CUSTOMER CARE

                          A:

                          There is a cap at the end that you will unscrew to let the oil drain out.

                          Answered on 9/15/2009 by Bryant C from Tech Department
                      • Q:

                        I have a 1989 Murcuiser 5.0L chevy V8. Will the 1/2" x 20 thread into it?
                        Asked on 6/6/2009 by DAC from Northern CA

                        1 answer

                        • CUSTOMER CARE

                          A:

                          This Oil Drain Kit should work for your Mercruiser 5.0L. If you have any further questions or concerns please do not hesitate to contact us here at Overton's and any of our representatives will be glad to assist you.

                          Answered on 6/16/2009 by Brooks, Marine Buyer from Overtons
                      Displaying questions 1-5

                      Do you have a question about this product?