detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
Get answers from real customers and in-house experts with AnswerBox.
Q:what are the dimensions of the product?Asked on 6/16/2015 by Sgt. USMC from Circleville Ohio
A:Hello Sgt. USMC,
The dimensions for the filter are: 4" high by 3-5/8" in diameter. The clear bowl on the bottom of the filter is 3-1/4" from the top of the thread to the bottom of the bowl. The hose barb at the bottom of the bowl is 1-7/8" high.
SteveAnswered on 6/17/2015 by Anonymous
Q:I bought a used boat with moeller clear site water separating fuel filter on it. I would like to have a booklet on this unit. Is it possible? If so how can I get it.
PeneAsked on 8/29/2009 by pene from east brunswick nj
A:There should be no problem with that. Please either call us at 1-800-334-6541 and speak with someone in our Tech Department or you can go to moellermp.com.Answered on 9/3/2009 by Chad @ Overton's from Greenville, NC
Q:need to know how it operates. I bought a used boat and it has this type of separator, when I turn the valve vacuum pulls air into it and gas drips out after suction. If there were water would have mexed back in with the gasoline?
thank you for you time.
PeneAsked on 8/28/2009 by Pene from new jersey
A:It sounds like the one you have needs to be replaced. The fuel water seperator does just that. It seperates the water from the fuel and sends the fuel to the engine while holding the water until it is manually drained from the holding area.Answered on 9/3/2009 by JUSTIN from OVERTONS TECHNICIAN