detailsback to top
Tank capacity: 40 gallons. Dimensions: 20.5"W x 26"L x 18.5"D.
Please note: Hydrocarbon swell causes tanks to expand by 3% in all directions. When measuring, please allow for this expansion as well as an extra 2-1/2" for fittings. Actual fill capacity can vary by +/- 5% of the printed capacity due to how the tank is installed in the boat and variances in the outside temperatures.
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:Can a unit like this be used as a fuel transfer tank...i.e. a gas pump nosel be hooked up to it....? Thank you for your timeAsked on 8/1/2009 by Dave M from West Warwick, Rhode Island
A:We actually would recommend a caddy tank like 71916or 74913.Answered on 9/29/2009 by Bryant C from Tech Department
Q:I am looking for a poly tank to replace the OEM tank in my BlueWave center console boat. The tank is located(exposed) inside the console mounted of course to the floor. I need to get my diminsions but when I buy a tank like this, it seems to come with everything included to install it. Including the tank sensor. Will it work with an existing OEM digital gauge(which is part of a combined group of gauges in one)? Does it come with a gauge or will I need to match a fuel gauge to this particular sensor ?Asked on 6/18/2009 by SHOTGUN from Waco, Tx.
A:According to the tank manufacturer, if the gauge is set up for the industry standard it will receive and process the 33-240 ohm signal of the Moeller tank sending units. This is normally the case. Moeller also advises that they do sell Blue Wave at least some of their fuel tanks which are shipped with the standard swing arm sending units, the same as the Moeller permanent tanks sold by Overton's. Those particular tanks are from a proprietary tool owned by Blue Wave so they cannot sell them to anyone else. You would need to find something close from Overton's selection if that is the case.Answered on 6/29/2009 by Matt from Overtons
Q:Can I use this tank for diesel?
Can I get it without the fuel gage?Asked on 5/11/2009 by Bill from Punta Gorda FL.
Thanks for your interest in our products! Unfortunately our Moeller fuel tanks are only rated for Gasoline use because they do not have a return access on the tanks. If you have any further questions or concerns please do not hesitate to contact us here at Overton's and we will be glad to assist you.
Thanks!Answered on 5/22/2009 by Brooks, Marine Buyer from Overtons
Q:Dimensions are unclear to me, is 20.5"W across front of tank, 26"L is that height? ThanksAsked on 5/11/2009 by Jeremy
A:I have listed the dimensions below. If you have any further questions or concerns please give us a call at 1-888-OVERTON and any of our Technical Product Specialist will be glad to assist you.
20.50" (Width of Tank)
18.50" (Height of Tank, not including Fuel Fill, allow 2-1/8" for fuel fill)
26" (Length of Tank)
I hope that this has help answer any questions that you had about the dimensions of the tank. Again thank you for your interest and we look forward to hearing from you soon.Answered on 5/26/2009 by Brooks, Marine Buyer from Overtons